Relocation shifting of equipments and allied works in Boiler House of Doctors Nurses Hostel SKIMS Soura

Amount

Disconnecting and dismounting of chimneys along with base, stacking them outside boiler house in at safe place, covered with tarpaulin sheets by using crane and skilled labours. .The job includes removing existing slab of old day oil tanks, all inside boiler house pipes, valves, bends, nuts and bolts etc by gas cutting .and shifting same in proper way and stacking them at safe place. The Job Further includes, cleaning of above items by using rustoline ,water jets ,blower etc shifting them to the site by using crane and skilled labour ,Installing and mounting them at designated site as per plan drawing .The job includes painting of chimney with two coats of heat resistant synthetic enamel paint of existing shade The job further includes connecting of chimneys with hot water generators as per direction of site Engineer depending on site conditions. The job also includes testing of equipments on no load and full load .All tools,tackles,safety items,PPE,sundry items etc are to be arranged by the firm

Providing and Fabrication cuboid MS day oil Tanks of capacity 5000 Liters by cutting and welding of 5mm thick MS plate. The Job Includes testing and finishing of the welded joints , hydro testing of the tanks as per norms and shifting same to the site and placing /fixing on the designated place as per site Plant . The Job also includes providing of one inlet (40 mm diameter), one outlet (20mm diameter) and one overflow (50mm) pipe shorts along with flanges of suitable sizes and duly welded with the tank. One top circular manhole along with Lid, duly fixing with tight hinges is to be provided. The tank must be provided with four resistance or butt welded hooks acting as anchors for lifting the tanks .All tools, tackles, safety items, PPE and crane etc are to be arranged by the firm, The tentative size of the tank must be 2m x2mx1.25m.The tank shall be subject to inspection during fabrication or after fabrication is completed at the risk and cost of the firm.

Painting of the tank by applying ready mixed red oxide zinc chromate primer of approved brand from outside as well as inside of the tank followed by spray painting with synthetic paint of approved brand.

Providing and fitting of MS, IS marked C Class pipes of following sizes and allied items. The job includes providing & fitting of flanges, washers, nuts, bolts etc. required at the site

20mm diameter MS C class Pipe

40mm diameter MS C class Pipe

50mm diameter MS C class Pipe

Providing and fitting of 20mm diameter butterfly/Ball valve.

Providing and fitting of Bends of following sizes

20mm diameter Bend

40mm diameter Bend

50mm diameter Bend

Providing and fixing of glass wool type insulation on the whole piping network inside Boiler House as well as outside including bends and valves. The job includes Providing and fixing of Aluminum cladding of 28SWG Sheet over the glass wool wrapped with mesh over the pipe line with grooving, screws ,washers, rivets etc

20mm diameter

40mm diameter

50mm diameter

Construction of vibration dumping, concrete foundation for installing four number of MS chimneys in M20 mix with (4.0x4.0x3.0) ft.Providing and fixing Steel bars of 10 mm diameter

Steel bars of 10 mm diameter

Providing, fabrication of MS Stand for holding of 5000 liter capacity MS tank fabricated out of various steel structures as under; i. Vertical posts fabricated out of ISA 65X65X6mm 1 6 no x (8FT)long = 128 rft =39 m @5.8kg/m=226kg ii. Braces fabricated out of ISA 50X50X6= 1ftx80 no=80rft=25m @4.5kg/m=113kg iii. Horizontal fixations fabricated out of ISA 65X65X6mm 12 ft long x 12 no=144 rft = 44m @ = 5.8kg/m =255kg Total of (i)+(ii)+(iii) = 594 kg

Fabrication, welding, providing and fixing of canopy fabricated out various steel members and C.G.I Sheets angle as per details given below Vertical fixation, i. (i).50x50x6mm angle iron as bottom members 10 feet x 04 no =40 rft= 12 m @ 4.5 kg/m = 54 kg ii. (ii).King post 50x50x6 mm angle iron 4 feet x 2no = 8rft =2.43m @ 4.5 kg/m = 11 kg Horizontal fixation iii. 50x50x6mm angle iron as rafters 10 feet x 05 no = 50rft = 15 m @ 4.5 kg/m = 67 kg iv. 50x50 x 6mm angle iron as purloins 10feet x 05No =50rft = 15 m @ 4.5 kg/m = 67 kg Total of (i)+(ii)+(iii)+(iv) =199 kg

Painting of the MS stand and roofing by applying ready mixed red oxide zinc chromate primer of approved brand followed by two coats of enamel paint of approved brand.

Providing/fitting of oil level indicating meter of required size as per site requirements

Providing and fixing of CGI Sheets of 0.50 mm 26 gauge with polymer coating, for roofing and side wise along with T-hooks, nuts, bolts, J-hooks, washers etc as per site requirement. The dimensions of the shed cum canopy will 10x10x 8 feet. (i).C.G.I Sheets on sides =4(10x8) =320 sft (ii).CGI Sheet requirement for roof :- 288 sft Total of (i)+(ii) = 608 sft Taking overlap @ 15% ,total = 700 sft = 65 m2

Dismantling and shifting of old M S day oil tanks(02 No) and shifting of the same using skilled labor/tools and tackles

Providing and fitting of ISI marked 3 core 6 mm2 Copper cable including Laying, fixing on wall,underfloor,around equipments etc as per site requirement (Havells/Polycab/Gloster/L&T)

Providing of following items ( Taparia/Jalani)

Open ended spanner(All sizes) made from Chrome Vanadium Steel/ Alloy Steel/ Stainless Steel

Ring spanner (All sizes) made from Chrome Vanadium Steel,/Alloy Steel,/Stainless Steel.

Screw driver (flat 2" to 12 ") made from Chrome Vanadium Steel/ Alloy Steel,/Stainless Steel

Flat Nose Pliers( each 6",8'',10'') Chrome Vanadium Steel/ Alloy Steel/Stainless Steel)

EVER GREEN ENTERPRISES

ASIF ENGINEERING WORKS AZAD GUNJ BARAMULLA