BMSICL/Infra/06/2026 GR-04, Construction of APHC Bagaura with Staff Quarter and Boundary Wall at Block-Daraunda, in District- Siwan

GR 04, Construction of APHC Bagaura with Staff Quarter and Boundary Wall at Block-Daraunda, in District- Siwan

SCHEDULE ITEMS

Quantity

Earth Work

EXTERNAL SEWERAGE NETWORK

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

up to 1.50 m depth

CONCRETE WORK

R.C.C. WORK

Wood work & Steel Work

Roofing

Aluminium work

Water proofing

CARRIAGE OF MATERIALS

SUB-HEAD XIV:- DIFFERENCE IN BASIC RATES

Deduction due to use of PPC

PLUMBING ITEMS

Sanitary Installions

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Kitchen sink with drain board

Flexible Pipe

Water supply

concealed work including cutting chases and making good the wall etc.

Exposed on wall

Drainage

EXTERNAL DRAINAGE SYSTEM

DRAINAGE NETWORK

BORE WELL INSTALLATIONS (1 nos)

Total civil +PHE ITEM

Total civil +PHE ITEM+GST

Electrical(BCD SOR ELECTRICAL 2023 )

Twin Control Point wiring in PVC conduit, with modular type switch :-

Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :-

Power plug wiring in PVC conduit (4 x 4 Sq.Mm.) :-

Circuit / Sub main wiring in PVC conduit :-

S/F light plug point Modular type accessories :-

S/F power plug point modular type accessories :-

S/F modular type blanking plate :-

DISTRIBUTION BOARDS & MCB's

EARTHING & LIGHTING PROTECTION SYSTEM

MISCELLANEOUS

SITC OF LIGHTING FIXTURES AND FANS

S/F modular type electronic fan regulator :-

TOTAL

Total SI

GR 04, Construction of APHC Bagaura with Staff Quarter and Boundary Wall at Block-Daraunda, in District- Siwan

NAME OF FIRM

ADDRESS OF FIRM

Non Schedule Item

Supply & Fixing ISI marked (IS:13849) Portable Fire Exitnguisher, ABC type capacity 6 kg, finished externally with red enamel paint, complete in all respects including initial fill and wall suspension. Capacity 6 kg

ELECTRICAL

1 Nos. 160A mps FP on load change over switch.

1 Nos. 160Amps TPN MCCB With thermal magnetic release for O/C,& S/C Protection.

Protection Instrument

Provision for fixing of 1No 10-60 Amp. Three Phase KWH Meter (dual type).

200Amps TP&N 16 kA aluminum conductor bus bar (BPTM type Heat-shrinkable busbar insulation) supported by DMC / FRP insulators.

i) 4 Nos. 63 Amps TPN MCB .

ii) 4 Nos. 40Amps TPN MCB .

FURNITURE (Make GODREJ / ROCK HAWORTH/ GEEKEN/ DURTIAN)

Material Specification: 1. Understructure - SS 304, ERW tube - section size -50 x 25 x thickness- 1.2mm, 2. Mattress support platform - Frame made of SS304 ERW tube of dia 20x20x1.2mm thickness and SS 304 sheet of 1.2mm thickness, 3. Side rail and Head rail - SS 304, ERW tube - section size-dia 16x1.2 mm thick. 4. Matress - Polyurethane foam, Mattress cover - Rexin., 5. Leg shoe - Material - nylon , Color - black. 6. Crutches - Lithotomy crutches made of SS 304 Rod and molded polyurethane with ergonomic calf rest profile to suit the Operation table application., 7. IV pole - Material SS304 ERW tube,Bigger tube dia - 19 mm thickness - 2.5 mm, Telescopic tube dia - 14 mm, SS304 Hook rod dia - 8 mm., 8. Collection tray - Material - SS304,Size: 460L x 410W x 100 mm H

Finish Specification: 1. All SS parts - Glossy buff finish 2. Mattresses - PU foam in Rexin stitched cover,Color-Black. 3. Calf pad - PU Moulded with strap-Color Black Key Features: 1. Sliding leg section - Leg section can be adjusted with the help of mechanism for Gynec procedures 2. Collection tray - SS collection tray is easy to remove after the procedure 3. Safety rails - SS 304 foldable side rail / Head rail provided for patient safety on all three sides 4. IV pole mounting provision - Provision provided for IV pole Compliances: CE, ISO 13485 & ISO 9001

OT Table

Functional Specification: 1. Height adjustment - 730mm to 1020mm from Floor to mattress Top (Motorised), 2. Trendelenburg/Rev.Trendeleburg - 30˚ / 30˚(Motorised), 3. Lateral tilt - 21˚ / 21˚(Motorised), 4. Back rest (Up / Dn - from Horizontal) - 70˚ UP/ 50˚ DN (Motorised), 5. Leg rest - Flat, 6. Head rest (Up / Dn - from Horizontal) - 45˚ UP/ 45˚ DN (Manual), 7. Leg rest abduction (Left / Right) - 0˚ - 90˚ (Manual), 8. Maximum patient Load - 200 Kgs, 9. Power supply - 220 V, 5 Amp, 50 Hz, 10. Battery Back-up - Provided fitted with OT table as emergency power back for resetting the positions., 11. Lithotonomy crutches-Adjustable along Rod Axis, Rotation 360˚ around road Axis, Crutch pad adjustable in swivel joint. Material Specification: 1. Base Assembly - Aesthetically and scientifically designed T-Shape Heavy structure made of Ms Sheet flat and MS Casting with Zinc plating finish., Base is counter balanced for stability and structure is cover with 1.6mm thick SS 304 Fabricated sheet.,

2. Column Assembly - Column is designed for self-lubricating, weldless, joint less and jerkless with high load carrying capacity.Column made by SS casting and complete assembly covered with SS 304 Fabricated sheet., 3. Table top Assembly-Top frame structure is made of SS 304 tubular frame of section 50mmX50mmX3mm Thk, 4. X-Ray Translucent top - X-Ray Translucent compressed laminate platform are provided on all sections of mattress support frame., 5. Matress - Molded Polyurethane foam mattress of density 55 Kg/Cu.m, Stitchless molded PU mattress ensure sterility and comfort, Mattresses are supported by 10mm Bakelite sheet., 6. Castor - Polyurethane twin wheel non-marking central lock heavy duty castor of wheel dia 100mm to suit the application of OT table.,

7. Actuators and Control - Back rest , Height adjustment, Trendelenburg and Lateral Tilt are operated by linear actuator of Ti-Motion make.Actuators works on powder 24VDC with duty cycle - 10% Legrest and Headrest are operated manually & Height adjustment, Backrest, Trendelenburg and Lateral tilt on actuator, 8. Crutches - Lithotomy crutches made of SS 304 Rod and molded polyurethane with ergonomic calf rest profile to suit the Operation table application. Finish Specification: 1. All SS parts - Glossy buff finish, 2. All MS Parts - Zinc plated, 3. Mattresses - Black color (molded), 4. Flexible bellow - Black color (Neoprene), 5. Calf pad - Black color (Molded) Compliances: CE, ISO 13485 & ISO 9001

Foot Step Type -1

X Ray View Box

MEDCIAL EQUIPMENT

25 Tooth Forceps 2 26 Needle Holder 2 27 Suture needle straight 10 28 Suture needle curved 10 29 Kidney tray 4(big) & 4 (small) 30 Artery Forceps, straight, 160mm Stainless steel 5 31 Dressing Forceps (spring type), 160mm, stainless steel 1 32 Cord cutting Scissors, Blunt, curved on flat, 160 mm ss 1 33 Clinical Thermometer oral & rectal 1 each 34 Talquist Hb scale 1 35 Stethoscope 1 36 Foetoscope 1 37 Hub Cutter and Needle Destroyer 1 38 Ambu Bag(Paediatric size) with Baby mask 1 39 Suction Machine 1 40 Oxygen Administration Equipment 1 41 Tracking Bag and Tickler Box (Immunization) 1 42 Measuring Tape 1 43 I/V Stand

SIGNAGE

Hospital Name Borad

MPPWD-2024 27.8

TOTAL IN FIGURE

TOTAL NSI IN WORD