Loading…
Loading…
Tender Value
₹12.7 L
EMD Value
₹12,680
Closing Date
21 Nov 2022, 3:00 pmClosed
Block Development Officer
Block Development Office Needamangalam
Construction of Anganwadi Building at Chithamalli Habitation in Chithamalli Melpathi
2022_RDTN_264450_1
353/21/B1
Open Tender
Civil Works - Buildings
Works
120 days
Needamangalam
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹12,680
22 Nov 2022
16 Nov 2022
21 Nov 2022
16 Nov 2022
21 Nov 2022
16 Nov 2022
Amount
Earth work excavation depositing on bank with initial lead and lift as per SS 20 B incl cost and conveyance of all charges etc complete
Supplying and Filling foundation and basement with filling sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification.
Supplying and Filling foundation and basement with filling carted earth in layers not more than 15cm . Thick well ramed, watered and compacted Complete
Cement concrete 1:4:8 mix using 40mm HBG Metal including cost and conveyance of all materials and all labour chages etc., complete
Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete. A) I. Foundation and Basement
.B) II. Superstructure- Ground floor
Supplying and errection of centering for sides and soffits with M.S.sheet and country wood props including hire charges for materials and all labour charges etc complete A) I. RCC COLUMN
II. Centering below basement
III. SUNSHADE SLAB
IV. LINTELS, RCC SLABS, BEAMS, TEE or ELL BEAMS,
Supplying and fabrication of steel including cost and conveyance of steel to site and cost of binding wire including all labour charges for cutting,bending, tying and forming grills for all works
Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc complete.A) Below Ground level
.b) Above Ground level
Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size
Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification
Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc complete.
Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete.
Cement concrete 1:2:4 mix using 20mm HBG Metal including cost and conveyance of all materials and all labour chages etc., complete
Provision for Cuddapah slab 40 mm tk for Cupboards inclding Kitchen table, Conveyance and Fixing supply and fixing etc
Paving the Floor with Ceramic tiles 30x30x6mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Dadooing with glazed tiles of size 150x150x6mm including cost and conveyance of all materials to site and all labour charges etc complete
Supplying and fabrication of the following steel doors , window,Ventilators and counter including cost and conveyance and all charges etc complete.
a)Steel Door -D1 (1.1 x 2.10 m)
B)Steel Door -D1 (1. x 2.10 m)
C)Steel Door -D1 (0.75 x 2.10 m)
d)Supply of window of size 1.20 x 1.30 m
e)Supply of Ventilator of size 0.60 x 0.45 m
f) Jolly J (0.90 x .45m)
g) Labour charge for fixing Doors
h)Labour charge for fixing windows
White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete.
Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete
Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete
Painting two coats over new iron works using ready mixed enamel paint including cost and all labour charges etc complete.
Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for cocealed Light point/fan point (5 points per coil) [ SD No. 24 ]
Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin- non inter locking CS plug Including pin top with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug Point [SD NO 37 ]
Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64
Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70
Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 85
Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 142
Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 112
Supply and fixing of 300 mm ( 12" ) AC Exhaust fan complete on the existing clamp. SD 114
Towards CFL bulb
TNEB service connection charges
Provision for Cartoon drawing
Provision for Rain Water Harvesting structure.
Provision for Sanitary arrangements and water supply Arrangement
Provision for Name board charges
Provision for Photo charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
BALAJI K
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .