CWE(S)/UTILITY/TOKEN/36 OF 2022-2023

Amount

Schedule 'A' Part - I (BUILDINGS AND STRUCTURES) This Schedule (contains under mentioned Sl. item No. 1.01 to 1.02 &6.00) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for Construction of Operator Room in Single storey with permanent specification with Load bearing wall using PCC blocks Masonry, RCC roof, ATT, Roof Treatment using APP Membrane etc., complete all as shown on drawings and as per specification.

Lumpsum price worked out by the contractor for Construction of Flushing tank of size 1.0m x 1.0m X 1.0m including wall using PCC block Masonry, RCC Cover salb etc., complete all as shown on drawings and as specified.

Lump sum price worked out by the Contractor for “EXCAVATION, EARTH WORK,SITE CLEARANCE,AREA DEVELOPMENT AND DEMOLITION” as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of `23,77,597.01 inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “ROAD/ PATH /CULVERT ” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of ` 4,95,220.25 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “ SEWAGE DISPOSAL ” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of ` 33,88,791.76 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for "SECURITY WALL, FENCING AND GATES” as listed in Schedule ‘A’ Part - V representing _______ % __________________ percent Above / Below the lump sum price of `3,52,536.05 inserted by the MES in Schedule ‘A’ Part - V

Lumpsum price worked out by the contractor for Construction, testing and commissioning of Sewage Treatment Plant(STP) as listed in Schedule `A' Part-VI (SEWAGE TREATMENT PLANT (B/R PART)) etc., complete all as shown on drawings and as per specification.

Lump sum price worked out by the Contractor for "STP E/M PART” as listed in Schedule ‘A’ Part - VII representing _______ % __________________ percent Above / Below the lump sum price of `1,47,570.40 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VIII representing _______ % _________________ percent Above / Below the lump sum price of `7,464.35 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - IX representing _______ % _________________ percent Above / Below the lump sum price of `11,952.38 inserted by the MES in Schedule ‘A’ Part - IX

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY ” as listed in Schedule ‘A’ Part - X representing ______ % _________________ percent Above / Below the lump sum price of ` 5,42,908.16 inserted by the MES in Schedule ‘A’ Part - X

Lump sum price worked out by the Contractor for “ EXTERNAL ELECTRIC SUPPLY ” as listed in Schedule ‘A’ Part - XI representing ______ % _________________ percent Above / Below the lump sum price of `4,27,512.32 inserted by the MES in Schedule ‘A’ Part - XI

Schedule 'A' Part - XII This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 13.00 to 57.00

SEWAGE DISPOSAL Supply & lay Double wall corrugated pipes High density Polyethylene DWCPE (SN8) pipes, laid in trenches/ floors over PCC bed; jointed with and including necessary fitttings such as bends, sockets and other connected accessories etc complete all as specified and directed for Nominal size 150mm dia pipes (ID 148.5mm/ od 172.5mm), complete all as specified and directed.

All as per item No.13 above but for Nominal size 200mm dia pipes (ID 197.4mm/ od 230.5mm), complete all as specified and directed.

STP E/M PART Supply and fixing stainless steel grade (SS-304) medium grade pipe 65mm dia with all fittings and fixtures for provision of air grid including necessary welding joints etc. complete all as specified and directed.

Supply and fixing stainless steel grade (SS-304) medium grade pipe 40mm dia with all fittings and fixtures for provision of air grid including necessary welding joints etc. complete all as specified and directed.

Supply and fixing stainless steel grade (SS-304) medium grade pipe 32mm dia with all fittings and fixtures for provision of air grid including necessary welding joints etc. complete all as specified and directed.

Supply and fixing stainless steel grade (SS-304) medium grade pipe 20mm dia with all fittings and fixtures for provision of air grid including necessary welding joints etc. complete all as specified and directed.

Supply,Installing,testing and commissioning ,consisting of coarse bubble diffusure,size 5mm Disc type with stainless steel grade (SS 304) to provide clog-free oxygen for Equalisation Tank & MBBR TANK 1&2, complete all as specified and directed. Make:Rehau/Techpro/PP Aqua.

Supplying, laying and testing of mild steel tubes 40 mm bore, ISI marked (IS-1239) (ISI marked) medium grade with all fittings and fixtures laid in floors or fixed to wall, ceiling etc including necessary welding works complete all as specified and as directed. Make:Jindal/TATA/Surya.

Supplying, laying and testing of mild steel tubes 50 mm bore, ISI marked (IS-1239) (ISI marked) medium grade with all fittings and fixtures laid in floors or fixed to wall, ceiling etc including necessary welding works complete all as specified and as directed. Make:Jindal/TATA/Surya

Supplying, laying and testing of mild steel tubes 100 mm bore, ISI marked (IS-1239) (ISI marked) medium grade with all fittings and fixtures laid in floors or fixed to wall, ceiling etc including necessary welding works complete all as specified and as directed. Make:Jindal/TATA/Surya

Supply & fixing Gate valve, flanged type, confirming to IS 13114 suitable for 32 mm bore pipe complete all as specified and as directed. Make:Zoloto/Teleflo/Brilliant.

Supply & fixing Gate valve flanged type, confirming to IS 13114 suitable for 40 mm bore pipe complete all as specifiedand as directed. Make:Zoloto/Teleflo/Brilliant.

Supply & fixing Air release valve double( isolated type) with flanged ends suitable for 65 mm bore tube ISI (IS 14846) marked complete all as specified and as directed. Make:Zoloto/Teleflo/Brilliant.

Supply MBBR media made of poly propylene with MOC virgin PP UV black specific gravity 0.90 to 0.95 gms/sqcm,density 0.93 ,size 15x22mm complete all as specified and as directed. Make:(PP Aquatech)/Proflex.

Supply & fixing Tube Settler modules made of PVC Size 75x60mm cross section area ,height 750mm thickness 1.0mm,Shape hexagonal Chevron, complete all as specified and directed. Make:(PP Aquatech)/Envirospec/AB Ploymer.

Supply, installation, commissioning and testing of non-clog Centrifugal sewage Pump set (two working + one standby) with cutter version to pump sewage from equilisation tank to areation tank at uniform flow rate , having Discharge 100 LPM at a head of 10metre suitable for delivery pipe 50 mm bore, 415V & frequency 50Hz . (For Equalisation Tank(1HP). Make (Kirloskar/MODEL 1500CW)/crompton/CNP. Material of Construction: Pump and Motor body: Stainless steel AISI-316 grade, Impeller: stainless steel AISI 316, shaft: stainless steel AISI 316/420,sealing: doubleMechanical seal arrangement. (a) Dry run protection. (b)Industrial type electronic liquid level controllers with stainless steel probes/sensors or float switch for automatic operation. © 1 Nos of pressure guage 2" dia with valve tee and fittings. (d) Alarm indication with signal in the event of pump failure etc. (e) Delivery pipe 50mm dia MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of butterfly valves and non return valve all as required.

Supply, installation, commissioning and testing of Centrifugal Pump set (one working + one standby) to feed semi tested water to secondary treatment process through sand pressure filter ,active carbon filter , having Discharge 200 LPM at a head of 15metre suitable for delivery pipe 50 mm bore, 415V & frequency 50Hz . (For clear water to filter(2HP). Make (Kirloskar)/crompton/CNP. Material of Construction: Pump and Motor body: Stainless steel AISI-316 grade, Impeller: stainless steel AISI 316, shaft: stainless steel AISI 316/420,sealing: doubleMechanical seal arrangement. (a) Dry run protection. (b)Industrial type electronic liquid level controllers with stainless steel probes/sensors or float switch for automatic operation. (c) 1 Nos of pressure guage 2" dia with valve tee and fittings. (d) Alarm indication with signal in the event of pump failure etc. (e) Delivery pipe 50mm dia MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of butterfly valves and non return valve all as required.

Supply, installing, testing and commissioning consisting of mono block type screw pump(one working + one standby) with cutter version to pump sewage from sludge holding tank to filter press at uniform flow rate having discharge of pumping set 80 LPM at 5 mtr .The pump shall be coupled to the adequate 1/2 hp , 1 phase electrical motor,mounted on a common base frame. (For Sludge transfer to Sludge drying beds) (1/2 HP):- Make: (Kirloskar/crompton/CNP.

Supply ,installation,testing and commissioning automatic hypo dosing unit with automatically opearted dosing pump etc. One no single FRP cylinder type chemical solution tank of 200 liters capacity having detachable lids with mounted inserts for mounting of pumps and strirrer.The electronic pump shall be operated on 220V single phase supply. Complete set of pipes ,valves and fitting, foot valve magnetic float switch to trip the dosing pimp at loe level of chemical in the tank. The free chlorine content in the filtered water shall not be less than 0.5PPM. PPM:-Make:Unique/Milton roy/UV rich (i)Min Actuating pressure -0.3kg/sqcm (ii) Max working pressure-0.5kg/sqcm (ii)Power -150 to 270 VAC,50 Hz (iii)Flow range - 6.25Lph (iv) Head:- 5-10meter.

Supply, installing,testing and commissioning of twin lobe design type air blower complete with motors, capacity 120 Cu.m/hour, 415 V, 3 Phase 50 Hz including butterfly & NRV,V belt,safety valve, pressure guage inter connection piping , including necessary cable connection with suitable size from starter to Air Compressor assembly.(5HP) MAKE:AKASH/EVEREST/AIRVAK.

Supply ,installing,testing and commissioning of bar Screen Unit 500 x 500 mm size consisting of 2. Nos. of bar screens made of 30x10 mm Strips spaced at a center to center distance of 30 mm and fixed at an angle of 60 degrees to horizontal, all bar strips firmly welded to single frame of 50x6x6 Mm thick as shown in drawings, entire bar screen unit is made in stainless steel 304 grade material and bolted to side walls, using anchor bolts of SS 304 material in ihe middle of bar Screen chamber. Make:UVRICH/Thermax ltd/Oxybee solution.

Supply and Fixing of lint Catcher Screen size 6 mm x 200 mm x1000 mm, in S.S. 304 material, in position in the MBBR tanks. (for MBBR 1, MBBR 2, tube settling tank)

Supply and fix Hand Operated Chain Pulley Block of capacity 1 ton having load chain 6 mm dia and standard lift height 3 meters, automatic double pawl breaking system, alloy steel load wheel mounted on 4 ball bearing , double cover protection , fully forged hooks are fitted with safety latches, zinc plated hand chain etc complete all as specified. Make:BHM 1 ton/Krost/Fulcrum.

Supply, fixing and commissioning factory fabricated MultiGrade sand filter (as per IS:2825) 6mm thick natural rubber lining fabrication standard multigrade filter complete in all respect,with dished end,supporting legs,manhole cover,frontal pipe work fitting with valves.Filter shall be provided with inlet,outlet pressure guage,sample cocks,charge of filter media graded sand and internals consisting of strainer fitted on plate for collection. cylinderical shape mild steel construction, Dia of vessel 900(L)x 1500(H) ,Operating Pressure 1 to 2 kg/sqcm,capacity 8700LPH. Make:oxybee solutions/UV Rich/Enviro Tech.

Supply, fixing and commissioning factory fabricated Activated carbon filter (ACF)(as per IS:2825) 6mm thick natural rubber lining fabrication standard multigrade filter complete in all respect,with dished end,supporting legs,manhole cover,frontal pipe work fitting with valves.ACF shall be provided with inlet,outlet pressure guage,sample cocks,charge of approived quality activated carbon media,provision bachwash and recharging of activated carbon etc complete. cylinderical shape mild steel construction, Dia of vessel 900(L)x 1500(H) ,Operating Pressure 1 to 2 kg/sqcm,capacity 8700LPH. Make:oxybee solutions/UV Rich/Enviro Tech.

Supply, installing, testing and commissioning horizontal single stage centrifugal monoblock sludge reculation pump set with CI body,CI impeller,coupled with totally enclosed,415volts,1500rpm,3 phase 50Hz ac supply complete piping ,valves ,non return valve fittings etc as required. (For nitrate recirculation) (0.5 HP):-(Make:kirloskar/CROMPTON/CNP. (i) Delivery pipe 40mm dia MS pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of sluice valves and non return valve all as required.

Supply, installing, testing and commissioning of submersible mixer ROTOR(one working+ one stand by ,material stainless steel body ,3 phase ac supply 50 HZ all as specified. (for sludge mixing) (1 HP). Make:SUVE-sm./sulzer/amamix

Providing and fixing dial type air pressure gauge with isloation cock 50mm dia pressure rating 0.5kg/sqcm,complete all as specified and directed.

Providing and fixing dial type water pressure guage 2" dia with all fitting,complete all as specified and directed.

INTERNAL ELECTRIFICATION Supply and fixing indoor luminare decorative batten for wall/ceiling mounting box type energy efficient saving LED 1x9/10W -2FT ,including twin twisted copper conductor flexible wire from ceiling rose to connectorcomplete all as specified and directed.

Supply and fixing on wall security LED light luminaire fitting 1X20 W and including 3 core flexible weather proof cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 25X3 mm, 4 nos Anchor Bolt of suitable size etc,complete all as specified and as directed. MAKE : CG MODEL LST 20 CDL/ SURYA MODEL SLE UL 20 W IP66 LXN

Supply and fixing in proper position MCB double pole of capacity upto 32 amps, 240 Volts C-curve with 10kA breaking capacity,complete all as specified and as directed. Make: Legrand or equivalent of Havells/Hager/C&S

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position,complete all as specified and as directed. Make: Legrand or equivalent of Havells/Hager/C&S

Supply and fixing BLDC Ceiling fan of Size 1200mm sweep, 230 volt AC and connecting with 3 core copper flexible cable from existing celing rose with MS hooke for hanging of suitable size,complete all as specified and as directed. Make :-Usha/Havells/Bajaj.

EXTERNAL WATER SUPPLY Construction of valve chamber of size 900 x 900 mm (Internal size) 900 mm deep with 200mm thick PCC block masonary walls built in CM 1:6 over 100 mm thick foundation concrete in PCC 1:4:8 type D2, (Using 40 mm graded coarse aggregate) with 100 mm off set, 15mm thick complete internal plaster and external plaster up to a depth of 15 cm below GL in CM (1:6), 3 mm thick MS sheet cover, double door welded to 50 mm x 50 mm x 6mm MS angle frame fixed with hold fasts in PCC 1:2:4 type B1 coping 50 mm thick in PCC (1:2:4) type B-1, 20mm x 6mm flat iron hinges with locking arrangement including lock sixty five mm, brassd and keys(Godrej/Shell), MS handles and applying two coats of synthetic eanmel paint over a coat of red oxide zinc chrome primer to all steel surfaces including excavation & earth work in any type of soil /soft disintegrated rock and disposal of surplus soil to a distance not exceeding 50 Mtr complete all as specified and directed

Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification . GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc(1:2:4 , B1) cover ,of 300 x 300 mm, complete all as specified and directed. MAKE: ASHLOK / INDELEC/JMV /TERCEL/TRUE POWER. Note: (i) Rate of earth works and removal of surplus is included in quoted rate. (ii)If Earthing test result more than 02 ohms then additional BFC compound bags supplied by the contractor without any extra cost till achieved desired earth result.

Supply and fix Non Return valves 80mm dia bore and fixing up in cast iron water supply mains of PN 1.0,complete all as specified and directed.

Supply, installation, commissioning and testing of treated water transfer pumps Consisting of Centrifugal type pumps(one working + one standby) to transfer STP treated water for irregation or domestic uses, having Discharge 300 LPM at a head of 12 metre suitable for delivery pipe 50 mm bore, 415V & frequency 50Hz . (5HP). Make .Kirloskar/crompton/CNP. Material of Construction: Pump and Motor body: cast iron ,impeller:cast iron (a) Dry run protection. (b) 1 Nos of pressure guage 3" dia with valve tee and fittings. (c) Alarm indication with signal in the event of pump failure etc. (d) Delivery pipe 80mm dia gi pipe heavy grade from pump set to existing delivery pipe flanged type complete with all fitting suitable for flanged pipe and necessary nut, bolts, washers and rubber gasket etc including fixing of butterfly valves and non return valve all as required.

Supply and fixing 75 mm PP-R Gate valves ( brass insert) as per requirement of the site, complete all as specified and directed

Supply and fixing of CI foot valve leather sheet type / flange type suitable for 80 mm dia GI suction heavy duty includung of nuts, bolts washers, gaskets and flanges etc. complete all as specified and directed

EXTERNAL ELECTRIC SUPPLY M&L cutting of road/hard standing upto a size not exceeding 20 cm in width and not exceeding 60 cm in depth for laying of LT UG cable/protection pipe line making good the disturbed portion so as to match existing finishing with PCC 1:2:4 type B1/cement mortar in CM (1:2) complete all as specified and directed

Supply,fixing, testing and commissioning of Motor control panel cubical type of suitable size, 415 volt, factory made dust proof vermin proof (Kiosik type) for indoor use made out of CRCA sheet 2.00 mm thick, powder coated, machinepressed, both side opening in two halves with provision of rubber beading and locking system, inciuding aluminium bus bar of 100 Amp capacity,4 strip mounted on porcelain insulator, bus bar chamber shall be provided with inspection covers each MCCB/ cubical switch shall have be independent opening, panel should be monthed on angle iron frame and legs (vertcal height of legs not less than 30 cm exept in PCC) made from angle of size 50x50x5 mm, frame and legs duly spray painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer legs grouted in PCC(1:3:6) type B-2(using 40 mm graded stone aggregate)complete including all connection/ control wiring with suitable size of copper conductor cable ,including danger notice sticker ,comprising the following accessory including testing complete all as specified. (For Main STP). (a) MCCB 63Amp 25 kA, 4 pole, Icu=100% Ics - 01 No. (Incomer) (d) MCB 16 Amp 10 kA, TP, Icu=100% Ics - 15 Nos. (Outgoing for pump) (e)MCB 6 Amp 10 kA, SP, Icu=100% Ics - 2Nos. (Outgoing light) (f) DOL Starter for 0.5hp Motor - 04Nos (g) DOL Starter for 1hp Motor - 05Nos (h) DOL Starter for 2 hp Motor - 02 Nos (i) DOL Starter for 5 hp Motor - 04 Nos (j) Single phase preventer-15Nos (k) R,Y,B Indicators -01 Set (l) Digital Amp meter (0-100) Amp incl necessary CTs (set of three) - 1sets (m) Digital volt meter (0-500V)-01 No

S & F Hot press moulded SMC junction / terminal box of size with internal diamensions of 200 x 140 x 95 mm with hinged door, incl provision of 4 way connector 415 Volts, 32 Amps made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs and glands, fixied on pole by means of 2 sets of clamps made out of MS flat iron of size 25 mm x 3 mm complete all as specified and as directed Make:Hensil/sintex

Supply, fabricate and installation of GI pipe bracket made out of medium grade GI tubing of 40mm bore of length 1.50metre bent to shape by hot forgoing after filling of sand and fixed on pole / wall with 2 Nos of MS clamps made out 25 x 4mm Flat Iron including bolts, nuts and washers etc., complete all as specified and as directed.

Supplying and fixing pvc insulated & sheathed armoured cable with copper conductor size 3 core 6 sqmm for pump connection.

Kakolil Trade Agencies