Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.0 CrAccepted-AOC | ₹3.0 Cr | 1 | Accepted-AOC L-1 |
| 2 | 2₹3.1 Cr+₹6.1 L (2.02%)Rejected-AOC | ₹3.1 Cr+₹6.1 L (2.02%) | 2 | Rejected-AOC L-2 |
Tender Value
₹3.5 Cr
EMD Value
₹7.1 L
Closing Date
2 Jul 2020, 11:00 amClosed
Chief Engineer NH PWD Roads
Office of the Chief Engineer NH PWD Roads, Meghalaya, Shillong
Construction of truck lay bye and wayside amenities at 67th km of NH-51 in the state of Meghalaya. Job no.051-MG-2019-20-157
2020_MoRTH_559783_1
PW/CE/NH/35/2019
Open Tender
Civil Works
Item Rate
365 days
NH-51
Please refer Tender documents
3 documents required · 3 mandatory
₹4,000
Chief Engineer NH PWD Roads
₹7.1 L
Shillong
29 Aug 2023
20 May 2020
3 Jul 2020
20 May 2020
2 Jul 2020
20 May 2020
20 May 2020 - 18 Jun 2020
26 May 2020
Amount
Civil works
CLEARING GRASS AND REMOVAL OF RUBBISH 2.2: Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed By Manual Means
EARTH WORK: EXCAVATION, DISPOSAL, BACK FILL 1.1: Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls,septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) In ordinary soil
1.5 : Raising low site around the building with approved soil obtained from outside by truck carriage upto 8 km including breaking clods, dressing etc. complete as directed by Engineer-in-charge.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
GRANULAR SUB-BASES 4.1.(B) (ii)Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.Granular Sub-base with Well Graded Material (Table 400.1 ) .This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (B)By Mix in Place Method
WBM II 4.9 (A) (ii): :Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 8-10 Tonnes static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical pecification Clause 404.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (A)By Manual Means
WBM III 4.9 (A) (iii):: Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 8-10 Tonnes static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical pecification Clause 405. (A)By Manual Means
INTERLOCKING BLOCK PAVEMENT 6.7 :Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
PLAIN CEMENT CONCRETE 2.1 (a) : Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing omplete (shuttering where necessary shall be measured and paid separately).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine)
KERB STONE: 8.1 a : Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (B) Using Concrete Batching and Mixing Plant
Tree Planting 20.9 :Supplying and planting of ornamental trees (30cm height sapling) including pit making (60cm x 60cm x 60cm), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance complete as specified and directed . This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) SHADE TREE (iv) Christmas tree / Kuki
Cafeteria,Market Area,Trellis,RCC Seats,Toilet,Septic Tank,Shops, Drain,GI Pole,Tyre Repairing Shed, Chemist Shop etc.
1.1 : Earthwork in excavation upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls,septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) In ordinary soil
1.5 :Raising low site around the building with approved soil obtained from outside by truck carriage upto 8 km including breaking clods, dressing etc. complete as directed by Engineer-in-charge This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
PLAIN CEMENT CONCRETE 2.1 (a) :(a) In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
PRE CONSTRUCTION ANTI-TERMITE 24.1 (a) (a) With aqueous emulsion having concentration 1:19 with chloropirophose solution 20% E.C. (tricel or equivalent) and water. This provides emulsion containing 1% hloropirophose solution (by weight)This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
SOLING 4.1 :Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Brick on flat soling
REINFORCED CEMENT CONCRETE WORKS 2.5.1(a) :In Foundation and sub - structure including footing, columns with base, tie and plinth beam, pile cap, raft slab, base slab, RCC walls, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to Plinth Level. (Without using admixture, plasticiser).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) M20 or Prop. 1:11/2:3
2.5.3(b): In Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase etc. above plinth level upto 1st floor level. (Without using admixture, plasticiser). This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) M20 or Prop. 1:1.5:3
REINFORCEMENT 2.8 (a (ii):Supplying, fitting and fixing in position reinforcement bars upto 1st floor level, conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required) .This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed a) From Primary Sources like TATA/ SAIL/ ESSAR/ JINDAL/ SHYAM/ RINL (ii) Super Ductile (SD) TMT reinforcement bars
SHUTTERING/ FORMWORK 2.10(a): Providing form work of ordinary timber planking of thickness not less than 25mm and removal of the same for concrete members so as to give a rough finish including entering, shuttering, strutting and propping etc., for height of propping and centering of supporting floor to the soffit of the concrete member not exceeding 4.0M as specified for the following items: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
2.10(b)Sides of tie beams, grade beams etc. at or below ground level requiring formwork at sides only. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
2.10 (c )(i)Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
2.10 (e )Flat Surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like.
BRICKWORK 4.4 : Brick work in cement mortar with 1st class brick including racking out joints and curing complete in super-structure above plinth level upto 1st floor level including dewatering if necessary as directed.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) In proportion 1:3 (1 cement : 3 sand)
17.2 :Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including rilling holes, upplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) In single stanchions (columns) composed of R.S.J. or channels with caps, bases, splices, angle brackets etc.
17.5: Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section, (ii) Rectangular Hollow section of specification RSH/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 and (iii) M.S. black-tube of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.Using TATA make Rectangular/ Square Hollow section of Grade YST-310 conforming to I.S. pecification : 4923- 1997.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
5.3 : 15 mm thick Cement plaster in single coat on fair side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed a) In cement mortar 1:3
15.38 Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) For 1.5mm thick application
15.46 Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.
15.47 Extra over item no 15.46 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
15.6 : Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) With ready mixed paint , Wood primer (pink/ white)
15.63 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of pproved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Surfaces over 100mm in width or girth. (i) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
15.67 : Applying primary coat over new steel and other metal surface over 100mm in width or girth with ready mixed "red-lead/ red oxide" primer after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
15.69 :Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Surfaces over 100mm in width or girth. (i) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
3.27 :Providing VITRIFIED floor tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality of specified size, shape and thickness not less than 18mm on floors, skirting, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pidilite/Rouf) / white cement slurry ixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (c) Deluxe range
3.28 :Providing polished VITRIFIED wall tiles of Somany/ Orient/ Nitco/ Qutone make or equivalent of approved quality, size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pidilite / Rouf) or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed - (b) Premium range Sq.m.
3.43.2: Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pidilite/Rouf)/ white cement complete at all level as specified and directed. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed VITRIFIED ANTISKID TILES - (b) Premium range Sq.m.
3.42 :Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pidilite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) Executive Quality
8.28 :Providing, fitting and fixing factory made exterior type fully panelled door shutters conforming to relevant I.S code having kiln seasoned and vacuum pressure treated Hollock / Bonsum / Sundi rail and styles with panel of Anchor brand 12mm thick veneered Teak wood particle board bonded with phenol - formaldehyde synthetic resin adhesive conforming to relevant I.S code including 4 nos. of oxidised iron butt hinges (100mm x 75 mm x 3.55mm) to each leaf complete.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) Double Leaf Door Shutters (iii) 30 mm thick.
8.18 :Providing fitting and fixing 1/3 panelled 2/3 glazed wooden shutters for doors/windows including oxidised iron butt hinges (100mm x75 mm x3.55 mm) with necessary screws including glass panes (other fittings to be measured and paid separately) (a) With Teak wood / Sissu wood. (iii) 30 mm thick.
8.2 :Providing wood work in frame (chowkats) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embedded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) With Sal wood
10.5 : Providing, fitting and fixing PVC Door shutters (single panel seamless finish) of Syntex make, made of extruded sections in the configuration of 'A' with overall dimension of 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement with infill made of multi-chambered hollow PVC extruded panel having an effective dimension of 762mm x 20mm or less as per requirement with usual process variation having a wall thickness of 1mm +0.03mm; including shutter frame with polymeric reinforcement of the size 125mm x 250mm mitred and joined at the corners by means of stainless steel screws and lock rail with 45mm x 18mm x 255mm reinforcement made of extruded hollow PVC section in the Configuration of 'H' having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm; including providing and fixing entire door shutter with S.S. screws at appropriate places for rust free quality complete at all levels as per specification.(Door fixtures and fittings to be measured and paid separately.)This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
12.2 a Supplying, fitting, fixing anodised aluminium fittings of approved make,reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished)This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a)Sliding Door B (ii) 250mm x 16mm
12.2.b Tower Bolt - (i) 300mm x 12mm
12.2.cDoor Handle (iii) 150mm
12.2.e Butt hinges - (iii) 75mm x 65mm x 4mm
6.8 :Supplying, fitting, fixing M/F Suspended Ceiling with G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws at 610mm c/c; and suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of size 25mm x 10mm x 0.55mm fixed to soffit with G.I. cleat and steel expansion fasteners; Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are to be fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c; fixing 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) to ceiling section with 25mm long drywall screws at 230mm c/c. and boards to be joined by filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard so as to have a flush look and painting where necessary (one coat primer and two coats of paint) complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators, etc. cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).(b) 12.5mm thick Sq.m.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
GRILLS 14.2 Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening/ railing with M.S. flats at required spacing in frame all round, square or round M.S. bars with round headed bolts and nuts or screws. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Plain grill (ii) Fixed to steel frames
SANITARY WORKS 34.2 :Providing fitting and fixing vitreous china pedestal type ater closet (European type W.C pan 400mm high ) with seat and ead, CP brass hinges and rubber uffers, CI/MS brackets, 40 mm dia flush band with fittings cluding painting of fittings and brackets, required. (Flushing Cistern to be paid separately) This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) White High
34.5 :Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed i) Parryware make a) White High
34.9 :Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (A) Parryware Make (a) White Medium
34.11 Supplying fitting and fixing vitreous china division plate including fitting and fixing compete as directed and specified This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) White. (ii) Medium.
34.13.5 :Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Basin (without pedestal).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (A) Parryware Make (a) Counter Top
34.18 :Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
34.22 :Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (A) Normal
34.24 (b) :Providing, fitting and fixing CP towel rail complete as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) Without Hook
34.36.1 :Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed a) In exposed surfaces or in trenches. (ii) 90 mm dia.
(iv) 75mm dia.
34.36.2 :Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed a) In exposed surfaces or in trenches. (ii) 90 mm dia.
(iv) 75 mm dia.
34.36.5 :Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed a) In exposed surfaces or in trenches. (ii) 90 mm dia.
(iv) 75 mm dia.
34.36.14 :Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (ii) 90 mm x 75 mm
34.45:Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
34.51 :Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
34.31:Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
34.32: Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
34.33 :Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Pipe for bottle trap 300mm long
XXVI GRATING 34.39 Providing fitting & fixing C.I. Grating to the floors complete as directed and specified. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) 110mm dia each
XI KITCHEN SINK (STAINLESS STEEL) 34.15 :Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc.complete including painting the fittings,cutting &making good the walls whereverrequired. (Sink cock, stop cocks, waste coupling are to be paid separately.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (c) Sink with drain board (37 in. x 18 in) Each 5,833.00 5,885.00 5,970.00
WATER SUPPLY WORK 36.2 :Supplying fitting and fixing approved uPVC Pipes of SUPREME/ PRINCE/ SFMC BRAND or other quivalent ISI approved brand (High pressure pipe Sch- 40), of following sizes, with all necessary 'R' brand or similar approved P.V.C.Fittings such as bend, tee, elbow,reducer, nipple, plug, long screw fitting,clamps etc. and fixing the pipe with clamps at 1.00m spacing/ cutting chases and making good the damages, testing of joints complete as directed.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed f)15 mm dia
36.2 (B): Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40) f)15 mm dia
36.7 Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified (G.I. & C.P. pipes will be measured separately)-This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Bib cock short body
36.8 :Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed I) Brass stop cock (heavy) of Sant make (i)15mm dia
X PILLAR COCK - 36.11 :Supplying, fitting and fixing C.P. pillar cock 15mm dia as directed.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (c) High Each
36.14: Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) Overhead shower (Chrome Plated)
38.2 :Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (III)2000 Ltr. Capacity (a) Sintex make
38.3 :Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) 2000 liter capacity
XIX TOILET PAPER HOLDER 34.3 :Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (c) High.
XIV HEALTH FAUCET - 36.15 Supplying fitting and fixing Health faucet with 1m long flexible tube with wall flange as directed and specified.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) Medium Each
ALUMINIUM ALLOY SHEET ROOFING 7.31(c) :Providing circular corrugated / troughed Aluminium roofing sheet in Aluminium Alloy (AA3105H18) procured from primary aluminium producer (On submission of certificate of alloy purchasing from primary producer) having computerized printing of alloy & thickness over the sheet including fitting and fixing necessary J or L hooks bolts and nuts 8 mm dia with bitumen / EPDM washer 25mm dia x 3mm thick and 1.6mm limplet washer complete excluding cost of truss, purlin etc.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (c) 0.50mm thick
11.6 Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
ELECTRICAL WORKS- CAFETERIA,LADIES & GENTS TOILET,SHOPS, TYRE REPARING SHED & CHEMIST SHOP and STREET LIGHT
38 (a) (i) :Concealed wireing in looping in system with 2X1.5 sq mm PVC insulated single core cable of 600 V grade in heavy Gauge PVC pipe including coupling and fitting of elbows , bend, fees junction boxes etc including required size of MS concealed boxes and front plate matching the colur of the surrounding wall or as directed by the Engineer in Charge or Architect for housing of switches, Sockets, Fan Regulator, Bell Push etc complete to light point.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Long point wireing upto 10 m i. with copper conductor
41 (a) (i):Concealed wireing in looping in system with 2X1.5 sq mm PVC insulated single core cable of 600 V grade in heavy Gauge PVC pipe including coupling and fitting of elbows , bend, fees junction boxes etc including required size of MS concealed boxes and front plate matching the colur of the surrounding wall or as directed by the Engineer in Charge or Architect for housing of switches, Sockets, Fan Regulator, Bell Push etc complete to celing Fan/Exhaust fan Point.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) Long point wireing upto 10 m i. with copper conductor
40 (a) (i): Concealed wireing in looping in system with 2X1.5 sq mm PVC insulated single core cable of 600 V grade in heavy Gauge PVC pipe including coupling and fitting of elbows , bend, fees junction boxes etc including required size of MS concealed boxes and front plate matching the colur of the surrounding wall or as directed by the Engineer in Charge or Architect for housing of switches, Sockets, Fan Regulator, Bell Push etc complete to power plug point with 2x 4 sqmm including supplying and fitting of 15 Amps 5 in 1/SS combined with continuous earth wire to Power Plug point Complete (a) Long point wireing upto 10 m i. with copper conductor
56(a): Supplying fitting and fixing of SPN/TPN MCB Metal Enclosure Distribution Board.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a)4 Way (8+12)modules
49(b) :Supplying fitting with fixing complete 415 v TPM IC main switch with neutral link.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b)63 Amp Capacity
51(b): Supplying fitting and fixing of Load Kontaket Miniature Circuit Breakers (MCBs).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b)6 -32 Amps SP MCB capacity
128(a) :Supplying fitting and fixing of 1.5 tonn Split AC with heating and cooling facility including supply of all necessary accessories as required for installation of air conditioner (AC) (a) 1.5 tonn AC
66(c)(ix) Supplying, Fitting and fixing of LED lightings complete.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed ( c) LED down light (ix) LED Ceiling Down Lights (Rectangular ) edge Series 11-30W
81(e) :Supplying Fitting and fixing of Exhaust fan double bearing self lubricating type single phase 50 Htz 250 V AC operated complete with supporting frame , fan blade ,nuts, and bolts fan regulator ,adjustable type lever and petty accessories as required.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed ( e) wall bracket fan : 450 mm
56(b): Supplying fitting and fixing of SPN/TPN MCB Metal Enclosure Distribution Board.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b)6 Way (8+18)modules
49(a) :Supplying fitting with fixing complete 415 v TPM IC main switch with neutral link.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a)32 Amp Capacity
56(c) :Supplying fitting and fixing of SPN/TPN MCB Metal Enclosure Distribution Board.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed ('c) 4 Way (8+24)modules
78(b): Supply and fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy hanging shackle & regulator complete with 30mm length down rod supplied with the fan by the dealer but the extra length will be charged @Rs25.00/ mtr.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b)AC ceilling Fan '1200' mm sweeps
84: Supplying materials fabrication & erection of street light poles 4metres high stepped made of heavy gauge SM pipe of a combination of 40mm & 60 mm and 150 mm dia with 300x300mm base plate fixed in grand with 0.25metres concrete puff projecting 0.5m outside the ground.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
74 (b) :Supplying fixing and commissioning of street light high pressure sodium murcury vapour(HPSV)/Metal Hellide(MH) die cast alluminium fith full frame glass cover intrgral luminaires fitting complete with all necessary accessories.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b)150W HPSV/MH fitting
101(b) :Supplying, laying, testing & commissioning of underground cable of the following sizes of 1100volts grade, 2 core PVC alluminium cable digging of trenches sand cushioning besides laying etc & refilling the same in layers or by supporting them on the wall.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (b) With 4 Sq.mm
102 (a): Providing laying connection testing & commissioning of the following sizes of 1100V grade alluminium conductor armoured underground cable & overall PVC sheathed cable as per ISI code in trenches including the cost of digging of trenches, sand cushioning with laying etc and refilling the same in layers or by supporting them in walls and all other accessories as required.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a) With 3 1/2'' core 25sqmm
100(a): Supplying Erection Testing & Commissioning of Floor Mounting Cubical Type Dust & Vermin Proof Electrical LT Control Panel Board of the following specification made with 16mm thick MS Sheet built on M.S. Angle Iron Frame Work duly painted with 2 coats of Powder Grey paints etc(Incoming & Outgoing).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (a)250 AMP TPN SDF with fuse
51(c): Supplying fitting and fixing of Load Kontaket Miniature Circuit Breakers (MCBs).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed ('c) 40-63 Amps SP MCB capacity
112(iv): Supply fitting and fixing of copper coated Chemical Earthing Electrode filled with CCM and Back fill compound(BFC).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (iv)Diameter: 75mm Length: 3 meter
104(d): Supplying and laying of 15mm x 5mm GI/Copper Strip at 0.50mts, below ground.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed (d)With 25mmx6mm GI Strip
RETAINING/BREAST WALLS
1.1: Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification etc.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed I.Ordinary soil (i). Upto 3 m depth A. Manual Means (Depth up to 3m)
2.1 :Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed In prop. 1:3: 6 (1 cement:3 coarse sand :6 coarse agg. by volume (using mixture machine)
4.11 :III STONE MASONRY WORK Stone masonry work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with unsize stone / Mawthup both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed A.Random Rubble Masonry
13.10/183 :Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
13.8 :Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
13.3/176 :Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications.This includes loading unloading, haulage , forest royalty and all aplicable taxes complete as directed
Ranjit Kumar Saha
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .