Fire fighting system in multi-level parking at Golghar Gorakhpur

Amount

Supplying, installing,testing & commissioning of electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required.

Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5kg/sq.cm. at highest and farthest out latest specified flow of 2280lpmat95m. head conforming to IS1520.

Suitable HP squirrel cage induction motor,TEFC, synchronous speed 1500RPM, suitable for operation on 415volts, 3phase 50Hz.AC with IP55 protection for enclosure,horizontal foot mounted type with Class – ‘F’ insulation, conforming to IS – 325.

M.S.fabricated common base plate, coupling guard,foundation bolts etc. as required.

Supplying, installing, testing & commissioning of diesel engine driven main firepump suitable for automatic operation and consisting of following: complete in all respect as required

Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft,mechanical seal to ensure a minimum pressure of 3.5kg/sq.cm. at highest and farthest out latest specified flow of 2280 lpm at 95 m. head conforming to IS 1520.

Suitable BHP,1500RPM water cooled with radiator, diesel engine conforming to relevant BS& IS standard complete with auto starting mechanism, 24Volts electric starting equipment, diesel tank,exhaust pipe extended upto1m.outside pump house duly insulated with 50mm thick glass wool with 1.0mm thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the even to fault with audio indications, painted with post office red colour etc. as required.

Supplying, installing, testing & commissioning of electric driven pressurisation pump(jockeypump) suitable for automatic operation and consisting of following: complete in all respect as required :

Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft,mechanical seal to ensure a minimum pressure of3.5kg/sq.cm. at highest and farthest out letat specified flow of 180 lpm at 95 m. head conforming to IS 1520.

Suitable HPSQ cage induction motor, TEFC type suitable for operation on 415volts, phase 50Hz.AC with IP55class of protection for enclosure, horizontal foot mounted type with class-'F'insulation,conforming toIS :325

Incoming

1) 400 Amps, 35KA (Icu = Ics) MCCB - 1 No.

2) 0-500V Digital type Voltmeter (size 96mm x 96mm) - 1 No.

3) Indication Lamps (LED type) -1 sets (1 set of 03 Nos.RYB)

4) 0-630A Digital type Ammeters - 1 No.

5)Current transformer (300/5A) -4Nos

6)Bus bar chamber with 400 Amps Aluminium bus bar ,suitable for 3 phases and neutral system - 01 set.

Outgoing

1) 200 Amps 25KA (Icu = Ics) MCCB, - 1Nos

2) 63 Amps 25KA (Icu = Ics) MCCB -1No

3) Fully Automatic delta starter(75HP) with LED illuminated ON-OFF push button - 1 No.

4)Fully Automatic delta starter(15HP) with LED illuminated ON-OFF push button - 1 No.

5)Auxillary contactors for main and jockey pumps

7)Annunciator with hooter, accept/reset push button with control wiring

8) Current Transformer (300/5A) --3 Nos

9) Current Transformer (100/5A) -- 3 Nos

10) Digital Ammeter 0-300 -- 2 Nos

11) Volt Meter 0 - 500-- 2 Nos

12) Single phase preventer-- 2 Nos

Diesel Engine Control.

1 Set Control for Diesel Engine comprising:-

Indication lamp for High/Low Voltage. Oil pressure, high water temprature and Engine ON indication.

All standard relays and accessories for automatic operation of diesel engine.

Supplying & laying the PVC insulated & sheathed FRLS Armoured cables of 1.1K.V. Aluminium Conductor including supplying and making and termination with brass compression glands

3 core x 25sq.mm

3 core x 70 sq.mm

Supplying, testing, installation & commissioning of pressure switches for Hydrant, Standby and Jockey Pumps, including necessary wiring upto control panel & other materials.

Supply & fixing of fire retardant/extinguishing Electrical Insulated synthetic mat of2.0mm thick+10% conforming to latest BIS:DOCNO.ET-02(5440) meeting requirements of IS3043,IS5216(part-1,2&3),IS8437 and IEC479, suitable for all voltages not exceeding 3.3KVAC and 220VDC supply and having minimum width of 1000mm+/-20mm and including supply of required quantity of adhensive/compound and fixing the same at site as per site requirement.

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S.suspenders including bolts & nuts, painting suspenders etc as required.

300 mm width X 50 mm depth X 1.6 mm thickness

Providing and fixing 4.00mm diac copper wire on surface or inrecess for loop earthing along with existing surface/recessed conduit/submain wiring/ cable as required.

Providing and fixing cast iron Butterfly valve of the following size complete with S.S.304 disc, bolts, nuts, washer sand neo prene gaskets as per specifications.

250 mm dia

200 mm dia

150 mm dia

100 mm dia

80 mm dia

Providing and fixing cast iron, double flange type non-return valve with swinging type gunmetal gate complete with bolts, nuts, washers and rubber gaskets conforming to IS:5312 (ISI marked).

150 mm dia

80 mm dia

Providing and fixing Testing arrangement in the pump house comprising one no.50mm dia. GM ball valve and 10RM of 50mm dia MS pipe (C Class) confirming to IS 1239.

Providing and fixing Y-strainer having tested to 30Kg/Sq.cm pressure.

200 mm dia

100 mm dia

Supplying and installation of Fire pressure vessel of 450mm dia and 1m high fabricated from 8-10mm thick M.S.plate suitable for 10kg/sqcm. working pressure with accessories, painted with two coats of Postal red enamel paint outside over a coat of primer and epoxy paint inside for automatic operation of pump.

Providing and laying MSERW black pipes as per relevant IS1239/3589 marked including all accessories such as screwed/welded flanges, tees, reducers etc. conforming to IS standards complete including painting, welding, jointing and neo prene gaskets, nuts, bolts etc. as required.

150mm dia pipe sand fittings complete with anticorrosive painting, wrapping and coating of the pipes as per IS:10211 in all kinds of soil at adepth1.5m including excavation and refilling the trench all complete.

100mm dia pipe sand fittings complete with anticorrosive, wrapping and coating of the pipes as per IS:10211 in all kinds of soilata depth 1.5 m including excavation and refilling the trench all complete.

80mm dia pipe sand fittings complete with anti corrosive, wrapping and coating of the pipes as per IS:10211 in all kinds of soilata depth 1.5 m including excavation and refilling the trench all complete.

Supplying and fixing stainless steel Single headed internal hydrant valves with instant aneous stainless steel couplings of 63mm dia. With cast iron wheel ISI marked conforming to IS5290 (Type-A) with blank stainless steel cap and chain, stainless steel or fice plate for reducing the pressure upto 3.5 kg/cm2 at outlet.

Supplying and fixing stainless steel Single headed externaly ardhydrant valves with instantaneous stainless steel couplings of 63mm dia. With cast iron wheel ISImarked conforming to IS5290(Type-A)

Providing 63mm dia 15m long fungus resistant reinforced rubber lined hose pipe marked to IS:636 Type A with stainless steelmale & female coupling

Providing 63mm (2½)"dia 15m long can vashose pipe complete with stainless steelmale& female coupling stainless steel wire wound with the pipe The pipe shall confirm to IS. 4927

Providing and fixing 63mm dia standard stainless steel short BranchPipe as per IS 903 with 20 mm nozzle complete with fixing clamps.

Providing and fixing first aid hosereel full swinging type with 30m length x 20mm dia rubber lined pipe with ABS plastics hut off nozzle of 6mm dia. The hosereel shall conform to IS requirements. Rate shall include 25mm dia pipe connection from riser to hosereel including flexible pipe, sockets, nipples, elbows and 25 mm ball valve

Providing & fixing M.S Hose cabinet with powder coating of postal red color (of size 750MM x600MMx450 MM) made of 14GM.S. sheet with 6mm thick glazed glass doors/necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2nos 15m long hoses and one no. branch pipe complete as per direction of Engineer incharge.

Providing and fixing cast iron Butterfly valve of the following size complete with bolts, nuts, washer sand neo prene gaskets as per specifications

150 mm dia

100 mm dia

80 mm dia

Providing and fixing Four Way Fire Brigade In lett o Hydrant outside the Building (Butterfly valve and non return valve to be paid seprately) complete in all respects :

150 mm dia

Providing and fixing suction coupling for firebrigaded rawl of water from tank with 150mm dia MS (Heavyclass) pipe and foot valve (Pipemax 24 M long)

Providing and fixing set of "Siamese" quad ruplet instantaneous fire brigade in let connections comprising of four gun metal instantaneous male in let coupling 63mm dia with plug and cap, chain bends, tees etc. for inlet to the static tank with 20m long pipe.

Providing & fixing M.S Hose cabinet door with powder coating of postal red color (ofsize minimum 1200mm wide, 2100mm height) made of M.S sheet 14G with glass front door and locking arrangement to accommodate 2-hoses, one branch pipe and to accommodate F.A. hosereelin addition for internal hydrant complete as per direction of Engineer incharge.

Supplying and installing cylindrical type air vessel of 300mm dia, 1.5m high fabricated out of 8mm thick MS plate suitable for 7kg/sqcm. working pressure complete with 25mm gun metal air release valve, safety valve, pressure gauge etc as required. The air vessel shall be continuous welded construction and painted with two coats of Postal red enamel paint outside over a coat of primer and Epoxy paint inside.

Providing and fixing Fire Manaxe as required with Test Certificate of 20,000 volts.

Providing, fixing, welding joints and testing of heavyc lass MSERW black pipes as per relevant IS1239/3589 with special accessories tees, elbows, flanged joints, rubberinsertion, nuts, bolts, washers or welded joint with flange joints on bends, including fixing the pipe with suitable flat iron stripclamps/brackets structural members dash fastner, civil breakage,making good the same etc.painting with a primer coat and two coats of postal red enamel etc.complete as required. (for sprinkler system)

250 mm dia

200 mm dia

150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

25 mm dia

Providing & fixing pressure gauges of not less than 100mm dia dial of pressure range 0-10kg/cmsq complete with shut off valve duly calibrated before installation.

Providing, fixing, testing & commissioning of sprinkler heads of the following type Pendant/Upright type with quartzond bulb operating temperature at 68 deg. C as per specification.

Providing and fixing 20mm nominal bore chromium plated, side wall extended through 6.5 mtr sprinkler suitable for operating on 68 deg. C

Providing and fixing flow switch of approved make for the Sprinkler annunciation system for the sprinkler system.

50 mm dia

100 mm dia

150 mm dia

Supply, installation, testing and commissioning of 5 zone Sprinkler flow switch Annunciation panel generally conforming to the intents of specifications complete as approved with : FACP with all in-built Zone cards and displays, Battery and Battery charger, Terminal strips for receiving and terminating all external cabling, All internal wiring , Auto dialling facility to nearest fire brigade station.

Supplying,fixing,testingandcommissioning,installationcontrolvalves comprising of : 1 No. Alarm Motor & gong (Hydraulically operated),1 No. Main Stop Valve, 1 No. Alarm Valve., Pressure Gauges Drain Pipe. 150 mm dia.

Providing and fixing CO2 type fire extinguisher as per IS2878 with discharge time of 10 sec to 18sec and gas storage pressure of 85kgf/sq cm fixed to wall with brackets complete with internal charge.

Capacity 6.5 kg.

Providing and fixing self glowing Exit sign board size 350x200mm single side painted made of luminiscent safely, rigid sheet in standard colour photo, luminiscent sheet made of crystals consisting mainly sulphide inprotective glass like sheet green and yellow crystal luminiscent (glass in dark) by action of light.

Supply, Installation, fixing, testing and commissioning of Fire alarm hooter/hooter cum speaker having an audible range of 25mtrs incustom built cabinet.

Wiring for fire alarm system with 1 mm. wire, PVC conduit pipe, junctions, Elbows etc.

Supply & Installation of Fire Alarm Control Panel 10 Zone with battery, inbuilt battery charger & battery case.

Supply & Installation of Smoke Detector.

Supply & Installation of Response Indicator (R.I.).

Supply & Installation of Manul Call Point (M.C.P.).

S/F of MAP 90 (ABC-Type-Powder) Selling Mounting Capacity 5 KG. 5year warrenty (Make-CEASEFIRE)

Dharmendra Kumar Srivastava

green star nursery