Construction of PDS building in Baburayanpettai colony at Baburayanpettai Panchayat in Acharapakkam Panchayat Union in Chengalpattu District under Acount

Earthwork excavation in all classes of soils except hadr rock in hard ordinary soil with initial lead and lift including all other labour chargesetc. Complete as per SS 20 B

Filling with good dry Msand including cost and conveyance to site and labour charges for filling, watering, tamping etc. complete

Cement Concrete 1:4:8 ( One Cement Four sand and eight Hard Broken stone) using 40 mm gauge Hard Broken Granite stone jelly for foundation including cost and conveyance of materials to site and labour charges for laying, watering and compacting etc. complete

Filling in Basement with Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Supplying and Erecting centering for Rcc itmes of works as per design including cost of shutting and labour chargers etc complete

Belove Ground Level

Above Ground Level

Reinforcement Cement Concrete 1:11/2:3 (One cement, one and half part of sand, three Hard Broken stone) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.

Brick work in CM 1 :5mix using country bricks including cost and convenyance all materials to site etc complete.

Belove Basement

Above Basement

Supply and fabrication of steel including cost and conveyance of all materials to site and all labour charges for placing in position etc. complete.

Granolithic Flooring CC1:2:4 (one of cement two of sand and four hard brokken stone) 20mm thick using 20mm ISSmetals including all other charges etc.,

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required design & finished thick. beating the concrete with wooden beaters of approved pattern, keeping the surface contantly wetted with sprinking lime & jaggery water as per standard specifications etc., complete as directed by the departmental officers. Rate for 10m 3(75.31.35)

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, Red oxide etc., complete complying with standard specifications. Rate for 10m2

Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:3, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly compl

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the sta

Special Ceiling Plastering in CM 1:3 mix, 10mm thickness including cost and conveyance of all materials to site and labour charges etc. complete.

Plastering in CM 1:5 mix, 12mm thickness including cost and conveyance of all materials to work site from approved quarry sources and labour charges etc. complete.

Fabrication and Supply of MS Door of any size with Single Leaves outer frame made of 35 x 35 x 5 mm equal MS 'L' angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos Horiz. And 3 nos. of Diagonal using MS Flat of size 20 x 5 mm fully covered with 18 gauge plain MS Full Sheet welded with shutter frame neatly including painting the whole unit with one coat of best quality of red oxide prime including cost, conveyance, loading, unloading etc., of size

Toilet Door (0.90 x 2.10 m)

Fabrication and Supply of MS window of any required size with three Leaves outer frame made of 35 x 35 x 5 mm equal MS 'L' angle mullion section made of 35 x 35 x 5 mm equal 'T' Section Shutter frame made of 25 x 25 x 5 mm equal MS 'L' angle for Horizontal

Window (1.00 x 1.30 m)

Fabrication and Supply of MS 'N' Type Glazed Ventilator of any required size with Single leaf outer frame made of 35 x 35 x 5 mm equal MS 'L' angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos Horiz. And 3

Ventilator (0.90 x 0.60 m)

Supply and fixing of RCC Jolly including the cost of materials and labour charges, conveyance to the site and fixing charges etc., complete as per standard specification

Jolly (0.60 x 0.45 m)

Supply and fixing of MS Rolling Shutter including the cost of materials and labour charges, conveyance to the site and fixing charges etc., complete as per standard specification

White washing One coats with approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers

Painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats with plastic emulsion paint of approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers

Painting two coats over new iron works using ready mixed enamel pain including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers

Providing and fixing PVC Rainwater Downfall pipes of 110 mm dia with necessary shoes, bends and other speicals, clamps, screws, nails, teakwood plugs etc., complete including cost of all materials complete complying with standard specification.

Supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid of ca pacity of 500 litres with accessories including giving necessary connection etc., complete as directed by the departmental officer

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour forconcealed power plug point SD 40

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open / fan point (For electronic Regulator) SD 18

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point SD 20

Supply and fixinp run off 2x4.0sqm PVC insulated Sc . Un sheated Sc conductor of 11 00 v grade on 7/20 GI Bearer wire for Service Main SD 65

Cost and supply of 18W 4 Feet LED Fitting with LEDincluding cost and conveyance and labour charges etc.complete

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supply and fixing of TNEB meter Board Suitable For 32 A Single Phase sc .With 32 A Fuse Unit 37 etc., SD - 125

Supply and fixing of Indain water closet including all charges

Supplying and fixing of water tight Bulk head fitting with guard (Philips/bajaj/crompton/Klite) suitable for incandescent lamp and 60W bulb . [ SI 85 ]

Supply and Fixing of 11 W CFL in the existing light point SD - 80

Supplying and fixing the Wall Panelling with the following specification fixing orizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the plywood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats ofsanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}