Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.2 Cr
EMD Value
₹4.4 L
Closing Date
5 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKSOL
19 conditions · 8 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V'whichever is less, where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. Theaverage annual contractual turnover shall be calculated as an average of "totalcontractual payments" in the previous three financial years, as per the audited balancesheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered forcalculating average annual contractual turnover. The tenderers shall submit requisiteinformation as per Annexure- VIB, along with copies of Audited Balance Sheets dulycertified by the Chartered Accountant/ Certificate from Chartered Accountant dulysupported by Audited Balance Sheet.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one ofthe following categories of work(s) during last 07 (seven) years, ending last day of monthprevious to the one in which tender is invited: (i) Three similar works each costing notless than the amount equal to 30% of advertised value of the tender, or (ii) Two similarworks each costing not less than the amount equal to 40% of advertised value of thetender, or (iii) One similar work costing not less than the amount equal to 60% ofadvertised value of the tender.
b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of dvertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work:-Any work involving supply, installation, testing and commissioning, of Integrated Security System / Video surveillance system / Access Control, Personal & Baggage Screening System, Explosive Detection & Disposal System and their integration.
29 conditions · 14 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank BranchCode, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposedto be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, ContractValue, Approximate value of balance work yet to be done and Date of award.
Please furnish list of Works completed in last seven financial years givingDescription of Work, Organization for whom executed, approximate value ofcontract at time of award, Date of award and Date of Completion. Date ofactual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of personal, organization available on hand and proposed tobe engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shallclearly specify whether the tender is submitted on his own (Proprietary Firm) oron behalf of a Partnership Firm / Company / Joint Venture (JV) /Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclosethe attested copies of the constitution of their concern, and copy of PANCard along with their tender. Tender Documents in such cases are to besigned by such persons as may be legally competent to sign them on behalf ofthe firm, company, association, trust or society, as the case may be.(ii)Following documents shall be submitted by the tenderer:
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the TenderForm (Second Sheet) above (As per GCC-2022).
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the TenderForm (Second Sheet) as per GCC-2022.As per GCC- 2022.
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA(Memorandum of Association) / AOA (Articles of Association) of the company(ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power ofAttorney issued by the Company (backed by the resolution of Board ofDirectors) in favour of the individual to sign the tender on behalf of thecompany and create liability against the company. (iv) All other documents interms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria)above as per GCC- 2022.
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) Acopy of Power of Attorney/Authorization issued by the LLP in favour of theindividual to sign the tender on behalf of the LLP and create liability against theLLP. (iv) An undertaking by all partners of the LLP that they are not blacklistedor debarred by Railways or any other Ministry / Department of the Govt. ofIndia from participation in tenders / contracts as on the date of submission ofbids, either in their individual capacity or in any firm/LLP or JV in which theywere / are partners/members. Concealment / wrong information in regard toabove shall make the contract liable for determination under Clause 62 of theStandard General Conditions of Contract. (v) All other documents in terms ofPara 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as perGCC2022.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
DIPP certificate submitted along with the tender document for, exemption of EMD should be valid on the date of opening of the tender, else the tender offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
List of works completed in the last seven financial years giving description ofwork, organization for whom executed, approximate value of contract at thetime of award, date of award and date of scheduled completion of work. Dateof actual start, actual completion and final value of contract should also begiven.
Supportive documents/certificates from the organizations with whom theyworked/are working as list of works completed and list of works on handshould be enclosed.
List of works on hand indicating description of work, contract value, andapproximate value of balance work yet to be done and date of award.
Uploading of declaration regarding Employment/Partnership etc. of RetiredRailway Employees as per GCC-2022. (Annexure attached)
Uploading of Tender Forms shall embody the contents of the contractdocuments either directly or by reference and shall be as per specimen form,e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway bord letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
Declaration form regarding site etc.
Declaration regarding constitution of firm.
Engineers/Personnel.
Performa of Completion Certificate.
All tender conditions shall be strictly complied with as per the Indian Railways Standard General Conditions of Contract (GCC), April 2022, along with all subsequent correction slips issued thereof along with Annexure L attached.
Augmentation of CCTV Cameras at different locations of railway stations premises over Jhansi division.
JHS-N-W-83-26~NCR
JHS-N-W-83-26
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹4.4 L
13 Oct 2026
13 Oct 2026
22 Oct 2026
106 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,84,37,120.55 | ||
| — | 900.00 | — | — | ||
| Supply of Double Walled Corrugated pipe size of outer dia 90mm /inner dia 76mm ,having non flame propagation and anti rodent properties as per RDSO Specification RDSO/SPN/204/2011 Version 1.1 with all accessories. (Inspection Agency:-Consignee). | — | — | — | 2,13,759 | |
| — | 14.00 | — | — | ||
| Supply of 6KVA on line UPS system including battery bank (16 blocks of 12V/100 AH SMF battery) including suitable iron battery rack and connecting wire. Make - Uniline/ Microtek/APC/Numeric/ Emerson or superior. (Inspection Agency:-RITES/RDSO). | — | — | — | 25,30,475.78 | |
| — | 200.00 | — | — | ||
| Supply, erection, foundation, fixing & commissioning of Hot Dip Galvanised octagonal Pole 5 Mtrs Long or as per site requirement . Pole should able to mount Camera. The material is to be supplied with prior approval of railway representatives. (Inspection Agency:-RITES/RDSO). | — | — | — | 11,44,006 | |
| — | 16.00 | — | — | ||
| Supply and installation of Network Video Recorder 32-channel input and Support 4 SATA HDDs up to 16TB Each or more and complete with all required accessories - fully configured and operational and compatible with Camera and HDD taken as per RDSO/SPN/TC/65/2021, Rev 6.0 Amendment No. 1, 2 & 3 or latest. Sch Make- CP-Plus / Sparsh or Superior. (Inspection Agency:- RITES/RDSO). | — | — | — | 7,83,342.56 | |
| — | 7.00 | — | — | ||
| Supply, Installation, Testing & commissioning of 3 KVA On Line UPS with isolation transformer suitable for single phase AC input & single phase AC output with minimum 12V, 42AH , 6 Nos. battery or equivalent capacity or higher, floor mounted type of make / Uniline / APC / Luminious / microtec / liebert or superior.This also includes connecting wire and battery stand. (Inspection Agency:-RITES/RDSO). | — | — | — | 5,10,793.08 | |
| — | 60.00 | — | — | ||
| Supply and installation of 8 TB surveillance Hard Disk compatible with NVR and Cameras. Make Seagate/Western Digital WD Purple or superior.(suitable for continuous recording applications) . (Inspection Agency:-RITES/RDSO). | — | — | — | 10,51,380 | |
| — | 125.00 | — | — | ||
| Supply and installation of 8 port Gigabit Lite Managed PoE Layer 2 Switch supports 8 nos 10/100/ 1000 BASE-T ports,along with 2 Gigabit SFP ports, as per RDSO/SPN/TC/65/2021, Rev 6.0 Amendment No. 1, 2 & 3 or latest make D-Link/Zyxel/ JUNIPER/TP-LINK or superior. (Inspection Agency:-RITES/RDSO). | — | — | — | 22,32,837.5 | |
| — | 6.00 | — | — | ||
| Supply and configuration of 24 Port L2 Smart Managed POE Switch 24 x Gigabit Copper PoE+ and 4 SFP port PoE as per RDSO/SPN/TC/65/2021, Rev 6.0 Amendment No. 1, 2 & 3 or latest. Make D-Link /Zyxel / Juniper or superior. (Inspection Agency:-Consignee). | — | — | — | 2,24,149.14 | |
| — | 4.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of Core Switch(20x10G SFP+ ports and additional minimum 4x10G base T/SFP+ combo ports) as per RDSO Specification No RDSO/SPN/TC/65/2021 Version 6.0 or latest. (Inspection Agency:-Consignee). | — | — | — | 4,43,356.84 | |
| — | 4.00 | — | — | ||
| Supply, Installation & testing of online UPS 2KVA capacity with minimum 12V, 26AH , 6 Nos. battery or equivalent capacity or higher capacity . Make APC /Numeric/ Emerson or similar. This also includes connecting wire and battery stand . (Inspection Agency:-Consignee). | — | — | — | 2,10,600 | |
| — | 50.00 | — | — | ||
| Supply of Cat-6 Patch Cord Lan Cable having 5 metre length of Make -D-Link Or similar. (Inspection Agency:-Consignee). | — | — | — | 14,690 | |
| — | 25.00 | — | — | ||
| Supply, installation, testing and commissioning of 55 inch large screen monitor of latest version of Q LED ultra HD 4K and necessary HDMI/VGA cables - complete setup and testing. Make LG/SONY (K-55S25NM2)/SAMSUNG or Superior. All installation accessories to be part of this item. (Inspection Agency:- RITES/RDSO). | — | — | — | 15,17,987 | |
| — | 11.00 | — | — | ||
| Supply of HDMI cable 05 mtr long With Following Specification- 1)Support-4K , 2)Version- V2.0, 3)Band width- 18Gbps or better Make:- Manhattan Model no: 355360/Kramer/Aten/Extron or Superior. (Inspection Agency:-Consignee). | — | — | — | 15,835.6 | |
| — | 15.00 | — | — | ||
| Supply of HDMI cable 10 mtr long With Following Specification- 1)Support-4K , 2)Version- V2.0, 3)Band width-18Gbps or better Make:- Manhattan-Model no: 355643/Kramer/Aten/Extron or Superior. (Inspection Agency:-Consignee). | — | — | — | 35,223 | |
| — | 7.00 | — | — | ||
| Supply & laying of HDMI cable of length 15 meter. High performance Active HDMI cable that supports signals up to 4K@ 60Hz (4:4:4), HDCP 2.2. Make- Manhattan/Extron or Kramer or Crestron or Aten or Equivalent specification of reputed make. (Inspection Agency:-Consignee). | — | — | — | 65,314.06 | |
| — | 10.00 | — | — | ||
| Supply of Wireless keyboard and mouse. Make:- Dell /Logitech (Model No:- 270r) /HP or similar. (Inspection Agency:-Consignee). | — | — | — | 15,950 | |
| — | 20000.00 | — | — | ||
| Supply of power cable 3 core, 2.5 sq mm, multi strand (36/0.3 mm dia) cable as per IS 694:2010 reaffirmed 2015 or latest suitable for Railway electrification area, shall be of reputed make like Havells/ Delton/ LAPP/ Finolex or similar. (Inspection Agency:-RITES/RDSO). | — | — | — | 23,29,800 | |
| — | 80.00 | — | — | ||
| Supply of Power extension board with 4 Sockets with neon bulb indicator .Make- Anchore / Havells (Model no Ecostar) or better. (Inspection Agency:-Consignee). | — | — | — | 59,920 | |
| — | 8.00 | — | — | ||
| Supply and installation of Two pole MCB for electronic equipments as per ISI Standard with current rating 6A to 32A as per site requirement in suitable PVC/ Metallic Box. Make- Anchor/Schneider/Siemens or Superior. (Inspection Agency:-Consignee). | — | — | — | 4,742.08 | |
| — | 3.00 | — | — | ||
| Supply of Polythene insulated polythene sheathed jelly filled, armoured, telephone cable with poly-A1 moisture barrier size: 10 pair,0.5mm conductor diameter as per RDSO Specn. No.IRS TC 41/97 amnd. No.2 or latest. (Inspection Agency:-Consignee). | — | — | — | 3,11,820.9 | |
| — | 21350.00 | — | — | ||
| Supply of CAT -6 STP cable. (10/100/1000 mbps compatible) as per RDSO/SPN/TC/65/2021, Rev 6.0 Amendment No. 1, 2 & 3 or latest Make D-Link or superior. (Inspection Agency:-RITES/RDSO). | — | — | — | 7,77,780.5 | |
| — | 800.00 | — | — | ||
| Supply and fixing of PVC conduit pipe 25 mm dia along with all fixing accessories like T, Bend pipe albow etc. Make:- Polycab / AKG / Finolex or Superior. (Inspection Agency:-Consignee). | — | — | — | 28,752 | |
| — | 300.00 | — | — | ||
| Supply and fixing of PVC FLEXIBLE PIPE 1" Dia. Make - Polycab /AKG / Finolex or Superior. (Inspection Agency:-Consignee). | — | — | — | 5,280 | |
| — | 50.00 | — | — | ||
| Supply of 2mtr Cat-6 Patch Cord for Connectivity. Make D-link or superior. (Inspection Agency:-Consignee). | — | — | — | 5,876 | |
| — | 40.00 | — | — | ||
| Supply of OFC Joint box for termination of 2 Core/6Core/ 12 Core Ofc.(Tiffin box type or similar).Make- Hanutech / JD or Superior. (Inspection Agency:-Consignee). | — | — | — | 7,206 | |
| — | 10.00 | — | — | ||
| Supply, Installation, testing and commissioning of 48 Fiber (SC/APC SC/APC) FDMS including splicing of OFC and termination of all fibres using pig tail cable of standard size ( All materials including pig tails (5 meter each)to be supplied by the contractor, this also includes arrangement & fixing of suitable metal box fixable in wall for spare OFC coil). (Inspection Agency:- Consignee). | — | — | — | 2,65,689.1 | |
| — | 10.00 | — | — | ||
| Supply of 48 fiber optical fiber cable straight joint enclosure [SJC] complete with all accessories along with enclosures for 48 fiber OFC and splicing of 2 X 48 F OFC. Splice losses in no case should be more than 0.1 dB. (Inspection Agency:-Consignee). | — | — | — | 2,07,967.1 | |
| — | 40.00 | — | — | ||
| Supply of Fast Ethernet to SFP Media Converter 10/100/1000 Mbps with 1.25G DDM 1310/1550 nm SFP Module Transceivers Upto 20KM of Make-D-Link / Mrotek / TPLink / Hanutech or superior. This also includes power adapter and necessary patch cords. (Inspection Agency:- Consignee). | — | — | — | 2,82,891.6 | |
| — | 6.00 | — | — | ||
| Supply of 2 Mbps Line termination unit/LAN extender 48V DC/230 V AC operated, as per RDSO spec. no. RDSO/SPN/TC/82/2020 Rev. 2.0 or latest, along with suitable connectors to extend line data over copper cable of 0.5mm/0.63mm/0.9mm dia. or CAT 5/6 cables. (Inspection Agency:-Consignee). | — | — | — | 1,40,836.62 | |
| — | 16.00 | — | — | ||
| Supply of permanently lubricated HDPE duct, 40 mm outer dia, as per RDSO spec. No. RDSO/SPN/TC/45/2013 Rev.2 Amndt.2 or latest, along with all accessories like end caps, collars, bends, couplers etc. (Inspection Agency:-RITES/RDSO). | — | — | — | 12,70,071.04 | |
| — | 40.00 | — | — | ||
| Supply & fixing of I/O box- CAT-6.D-Link Make or superior. (Inspection Agency:- Consignee). | — | — | — | 11,324.8 | |
| — | 10.00 | — | — | ||
| Supply and installation of FMS (12 F-in & 12 F-out )) rack mountable single mode with Suitable type connector (Preferably SC type) with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor).Make D-link /Raycom/Tyco or superior. (Inspection Agency:-Consignee). | — | — | — | 66,784.5 | |
| — | 100.00 | — | — | ||
| Supply, Installation of 2 x 6 Fiber FMS with all required Accessories(Pig tails, connectors(Preferably connector will be SC type or as per site requirement), patch panel etc.) of reputed make and termination & splicing as per direction of site supervisor. (with less than 0.03 dB loss per splice. Make- D-Link / RAckOm Or superior. (Inspection Agency:-Consignee). | — | — | — | 3,26,143 | |
| — | 5.00 | — | — | ||
| Supply and installation of 42 U covered server Rack with front side transparent door with lock arrangement, fitted with one no. FAN tray with 4 nos. 230 V operated fans, cable organizers 2 nos.,provision of two nos. of horizontal power supply (each consists of 8Nos.x 15A/5A multi pin sockets with ON/OFF switch and fuse arrangement strip) Make- HCL / Rittel / APW / President or similar or reputed make. This rack to accommodate all networking equipment and also proper earthing of rack should be done. (Inspection Agency:-Consignee). | — | — | — | 1,41,964.8 | |
| — | 8.00 | — | — | ||
| Supply and installation of 19 inch rack of 24U size and depth 650 mm with two nos of cable tray for accommodating modems, 2 Nos of power strips of minimum 4 sockets each and two nos of fan for proper ventilation with required accessories for mounting the equipment's. Make- APW/President/HCL/Rittal /Camrack /D-link or superior. (Inspection Agency:-Consignee). | — | — | — | 2,00,302.4 | |
| — | 3.00 | — | — | ||
| Supply, installation and Fixing of 19 inch 9 U Racks wall mountable with Front Glass Door, Socket Power DB, Fan-FanTray, Cable Manager ,Hardware Packet , Earthing etc. with required accessories for mounting the equipment. Make: D-Link/CP-Plus or superior. (Inspection Agency:- Consignee). | — | — | — | 13,658.55 | |
| — | 120.00 | — | — | ||
| Supply of 6U outdoor cabinet enclosure IP66 complied pole mount for housing Battery, Controller, Networking Cables, etc., with required accessories like cable tray, power strips with socket, Fan and pole mount arrangements. Make: Rackom 6U IP66/ D-Link/CP-Plus or superior. (Inspection Agency:- RITES/RDSO). | — | — | — | 9,62,880 | |
| Supply and fixing of RJ-45 Connector D-Link make or Superior. (Inspection Agency:- Consignee). | — | 1000.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ADVANCECORRECTIONSLIP7.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP8.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP9.pdf
ATTACHMENT
GCC-2022change.pdf
ATTACHMENT
GCC 2022 Correction slip 4
ATTACHMENT
AdvanceCorrectionSlipNo_6.pdf
ATTACHMENT
GCCcorrectionslip-5.pdf
ATTACHMENT
Annexure-VandAnnexure-V_A_.pdf
ATTACHMENT
DIPPtendercondition.pdf
ATTACHMENT
2021Tele523part13425647.pdf
ATTACHMENT
TENDERBOOKLET83-26.pdf
ATTACHMENT
AdvanceCorrectionSlipNo.2.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
GCC 2022 Correction slip 3
ATTACHMENT
Allfirmsregimplementationoflabourlaw.pdf Annexure L
ATTACHMENT
ADVANCECORRECTIONSLIP10.pdf
ATTACHMENT
ACS12.pdf
ATTACHMENT
GCCcorectionslip11.pdf
ATTACHMENT
RetiredRlyEmployee.pdf
ATTACHMENT
GCC2022ACS-3AdvanceCorrectionSlipNo.3.pdf
ATTACHMENT
2022-CE-I-CT-GCC-2022-PolicyCorrectionSlipNo.4.pdf
ATTACHMENT
Allfirmsregimplementationoflabourlaw.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .