HIGH MAST LIGHT AT SRINAGAR SINGHABAHINI MANDIR within Lakshmipur Gram Panchayat under Chandrakona-I Panchayat Samity , fund- APAS, Scheme Id , APAS/01/232/52/0004

Supply of 10 Mtr. Octagonal in shaft shape, continuously tapered sections having dimensions and thicness as reqd. in the design made from high tensile steel conforming to BSEN 10025 gr. S 355, high Mast system tower with standard dimension of Botom A/F 175 mm, Top A/F 70 mm, plate thickness of 3 mm, PCD 310 mm, Foundation bolt cat. M24/750x4 with its accessories, Mast shaft shall be given in two sections, Hot dip galvanized and suitable for wind velocity as per IS: 875/1987 part 3. It shall also include accessories for High Mast including Head frame, inside wiring arrangemnet, lighting arresters, loop box of IP-65 for o/g to luminaires on top mount on mast, [Pole Make: Electro pole/ Bajaj/ Utkarsh/ MNP or apvd. make as per EIC]

Erection & Construction of suitable shallow foundation as per standard design as per the manufacturer with 1:1½:3 cement concrete M-20 gr. for the High Mast onsidering the safe soil bearing capacity at site as 10T/ sq. mtr. and about 2 mtr. depth along with suitable dimesion that conforms safe bear of high mast with arround height of 300mm above ground, incl. all material and labour including the cost of one set 4 Nos. of foundation nuts and bolts of 750mm made out of tor Steel M24 and installation at site with wiring complete in all respect i.e. entire satisfaction of Engineer-incharge. This civil foundation work incl. for erection of 10 Mtr high mast tower by earth work in excavation of foundation trench approx. zone 1200x1200x1500mm including removing soil and necessary trimming the side of trench leveling, dressing and the bottom boiling our water soil testing etc. after that picket jhama bricks soiling and dressing bed leveling and filling joints

Erection of 10 mtr High Mast over the civil founda- tion bolts with help of Trolley fixed moving crane ( 5 Tonne Capacity) and using other modern engineering practices along with luminaires inatallation to the end top ring bracket by suitable techniques and means incl. necy electrical connection in proper electrical system eg. socketing etc. complete

Supplying of 150 Watt LED Flood light luminaire having Pressure Die-Cast housing with IP 65 protection wide lighting diffuser type. [Havells/Panasonic/Crompton/Philips/Surya make,

Supply ,Fitting, fixing & connection of following materials Switch gears list: (a) MNX12 Contractor = 1 No. [legrand/Havells/Schneider] , (b) DPMCB Standard Rating & Make Apvd by EIC,(c) Time Switch(Analog) / Digital Havells make or suitable similar switch,,

Supplying of mainline cable Power Supplier end to panel wiring cable incoming of 11kV gr. 4 core Al. Armoured 16 mm² Cable, Make-Polycab/Havells/ Gloster/ Finolex/ KEI make] with necy. Crimping sockets.

Earthing installation: Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below After that, Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe incl. suitable earth bus bar and MS strips/wires to panel attachment.

Supply, fitting,fixing & connection of Glowsign board double faced with minimum 8 inches width ) made of 26 SWG GI sheet duly coated by white paint in side the box and cover (one side/both side) with GI structure & should be made of Flex printing with appropriate colour combination including T5 tube, ballast, lamp holders etc and necessary internal wiring by FR grade copper wire 1100V grade alongwith copper ECC. with GI Structure in suitable size or Marble PLAQUE of suitable size

GST and Labour Cess (9% + 9%) +1%

Please Enable Macros to View BoQ information