GE (N) P/TOKEN- 03 OF 2021-2022PROVISION OF CERTAIN SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE

Amount

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 150m and not exc.250metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 250m and not exc.500metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in foundation, caps and bases of posts etc. complete all as specified and as directed.

Material and labour for providing 50mm thick precast cement concrete (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) (measured solid) as in louvers and jallies, including all mouldings, set in cement mortar (1:4) complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4) over and including 10mm thick backing coat in cement mortar (1:3), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges complete all as specified and as directed.

Material and labour for 2nd class hard wood timber fixed, in scantlings, clean sawn unframed work complete all as specified and as directed.

Material and labour for 2nd class hard wood timber fixed (except timber), in scantlings, clean sawn complete all as specified and as directed.

M&L for Eaves/ weather boarding with 20mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape including taking down existing board complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco/ Shera wall

S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single executed process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single executed process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 35mmx 6mm thick 2nd class hard wood plain cover fillets on all sides including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Taking down steel window/ ventilators, area not exc.1 sqm each complete all as directed.

Supply and fix factory made solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 19mm x 19mm (19 gauge) for top rail, bottom rail and in styles with 2, 4, or 6 raised panel design with 5 mm thick Moulded Prelam PVC Sheet on the front face & 5 mm thick prelam PVC plain sheet on back face, inside core shall be of PVC soild board of 19mm to 20mm thick, shutter shall be provided with 10mm thick PVC lipping all around the edges, supplying & fixing in frame at site as per specification & drawing. Note: All screws shall be self tapping chromium plated screw not less then 50mm long.

S & F Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 29 to 30mm thick consisting of frame made up of MS tube of size 19mm X 19mm (19 guage) for top & bottom rail and in styles. Single piece plain coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 10mm thick struck inside with solvent cement. Plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC solid core board 19mm to 20mm thick. Panel shall be of wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.40mm, stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail, fixed with self tapping screw not less then 50mm long complete all as specified and directed by Engineer-in-Charge. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for 100mm size stainless steel butt hinges fixed with stainless steel screws complete all as specified and as directed.

Supply and fix, 150mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

S&F in repairs brass chromium plated single towel rail 18" long including built in side brackets ,Cat No. AEC-1111B of make Jaquar or equivalent of Make CERA, Prayag and as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for floor door stopper of stainless steel body and tongue, with hard drawn steel spring, overall length of cover plate 140mm with rubber shoe all as specified and as directed. Make: Maharaja door stopper cat No. 5121 or equivalent as per Appx 'A' as approved by GE.

Supply and fix for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A for structural work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed.

Supply and fix for mild steel work in tubular trusses, main columns, posts, for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

M & L for aluminium partition powder coated frame for partition, door, window, ventilators/ventilator shutter, snap grid etc. fixed in repairs ( Minimum thickness of powder coating 50 micron) complete all as specified and as directed.

Supply and fix for aluminium anodised louvered ventilator with adjustable louvers using standard aluminium section as specified including glass 4mm thick frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including dismantling old unserviceable ventilator complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted/ black glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

M&L for aluminium grill of weight not less than 1Kg/Sqm complete all as specified and directed.

Supply and fix for powder coated aluminium double leaf, two panels, openable door , 5mm thick plain glass panes fixed with garware sun control film, fixed with rubber beading and glazing clips, alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for sheet width 701 to 850mm of weight between 36 to 80 kg , mortice door lock, handle, tower bolt 200mm (02 Nos.), aluminium sliding bolt using aluminium sections all as specified and directed. Note :- Catlouge numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) 1'' interlock (20939) (vii)1'' handle(20602) .

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix (Except sheeting) for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix for fibre glass reinforced translucent corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Material and labour for 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120gm/ Sqm complete all as specified and as directed.

Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Material and labour for Roof tiles Mangalore pattern interlocking at side joints, class A-A, laid dry complete all as specified and as directed.

M&L for Roof tiles (Except tiles) Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled shall be re-used.)

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles, bedded and jointed in cement mortar (1:6) etc including dismantling of tiles complete all as specified and as directed.

M&L 150mm dia mild steel sheet eaves, gutters galvanised with grade of zinc coating 120, half round with rounded edges thickness of sheet 1mm complete all as specified and as directed.

Supply and fix 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

M&L for 12.5 mm thick Gypsum board (moisture resistant) seamless as in the ceiling/Lining fixed with counter sunk screws on and including GI channels frame work of standard section as per manufacture’s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (the frame work shall be fixed with the help of GI suspenders of suitable size with the help of sash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required complete all as specified and directed. Make: Gyproc-Saint Gobain of equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.

Supply and fix for tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x 3600mm, cross "T" of size 24x25x0.3x 1200mm, secondary cross "T" of size 24x25x0.3x 600mm and PPGI wall angle of size 24x24x0.4x 3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x 3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc ® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints.

The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall/ hung from ceiling using 2mm dia. G.I. suspension wires and 'J' bolts, washers, nuts spaced at 1200 mm both ways as per site requirement. 24x25x0.3x 1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x 600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally 9.5mm thick square edge Gyproc Polyshield Gypsum tile of size 595x595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid including making niches for fans/ light complete all as specified and as directed. Make: Gyproc-Saint Gobain of equivalent or Armstrong, Diaken, New Age (ACE) as approved by GE.

M & L machine cut polished cudappah stone slab 20-25mm thick as in lintels, shelves, partitions, cooking platform below granite stone and the like over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including making good disturbed surface complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type B2 (using 40mm graded broken stone aggregate) as in floor/ path/hard standing finishing the surface even and smooth without using extra cement including making necessary joints complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand (all by weight) complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection, floor, hardstanding, courtyard, path laid in alternate bays not exc. 3.0m, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for roughing surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust, etc. & brushing neat cement slurry with 3.00 kg of cement per Sqm complete all as per specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300/350mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 600mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11sq.m but not exceeding 0.18sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.06Sqm and not exc. 0.09Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 10mm thick screed bed in CM (1:3) complete all as specified and as directed.

Material and labour for coloured glossy rubber moulded chequered cement concrete tiles of size 30cmx30cmx25 to 27mm thick in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces and provn of sagol finish complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces with sponge finish complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar on fair faces of brick or concrete surfaces in two layers i.e. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with integral water proofing compound as per manufacturer's instructions with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Material and labour for appying 1.5mm thick wall care putty on new plastered wall surface complete all as specified and as directed.

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for preparation of new plastered surface of any description and appying two coats of 100% acrylic exterior emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls, preparation of surfaces and make the surfaces free from loose particles, oil stains etc., preparing surfaces and applying two coats of oil bound/ emulsion distemper over a coat of alkali resistant priming complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Material and labour for complete removal of existing finish/treatment on wall surfaces, preparing surface and make surface free from loose particles, oil stains etc and applying two coats of cement based paint complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15mm complete all as specified and as directed.

Supply and fix for 15mm bore steel water tubing 'medium grade' galvanised,in short length with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 15mm bore steel water tubing 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, in short length with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 25mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 25 to 32mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Dismantling water tanks, capacity exc 500 and not exceeding 1000 litres , complete all as specified and as directed.

Supply & Fix rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete all as specified and directed. MAKE :-SINTEX or equivalent of Makes as per Appx A as approved by GE

Supply and fix in repair bib tap for 15mm bore pipe, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion ' series or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in reapir pillars tap for 15mm bore pipe, cast copper alloy, with capstan heads, chromium plated, cast copper alloy, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15mm dia , pillar tap with 190mm extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified. [Make : JAGUAR KUP-35021 PM

S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs brass chromium plated quarter turn wall mixer with provision for overhead shower complete with wall flange with 115mm long bend pipe on upper side, connecting legs Cat No. FUS-29273 UPR of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated sink cock with regular swinging spout (wall mounted model) with wall flange complete all as specified and as directed. Make: Jaquar Cat part No ARI 39347S or equivalent of make as per Appx 'A' as approved by GE

Supply and fix in repair stop valves for 15mm bore pipe, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs brass chromium plated quarter turn two way bib cock with wall flange 15mm dia Cat No. FUS-29041 of make Jaquar ‘FUSION series or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for hand shower, chromium plated (health faucet) of ABC body 1.2 metres long easy flexible tube in chrome finish and wall hook all as per Cat No. ALD-587 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.

Supply and fix exposed shower pipes with provision for simultaneous working of showers with operating divertor knob, round shape dia 24 mm, size 975x370mm with sliding holder for hand shower, wall bracket & 15mm concealed water inlet concealed shower mixer without shower complete all as specified and as directed. Make: Jaquar Cat part No SHA-1215R* or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated towel rack, 600mm long with lower hangers,Cat No. AQN-7781 of make Jaquar ‘QUEEN'S Series or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE. all as specified and as directed.

S&F in repairs stainless steel toilet paper holder, Cat No. AEC-1151 of make Jaquar or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix for chromium plated soap dish fixed to wall with CP screws,complete all as specified and as directed. Make: Prayag Cat No. BA-25 or equivalent of make as per Appx 'A' as approved by GE

Supply and fix in repairs for brass chromium plated soap dish (Polycarbide), fixed with brass CP screws, complete all as specified and as directed. Make Jaquar Cat No.AEC-1133 or equivalent of make as per Appx 'A' as approved by GE

S&F in repairs brass chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs brass chromium plated towel ring round with round flange, Cat No. ACN-1121BN of make Jaquar ‘Continental Series' or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix 15mm size PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed. Make: Prayag Cat No. 323-Z or equivqlent as per Appx 'A' as approved by GE

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction double (double T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction double (double T) equal or unequal for 75 mm bore pipes with access door complete all as specified and as directed.

Supply and fix in reapir for PVC (SWR) vent cowl for 75mm bore pipe complete all as specified and as directed.

Material and labour in repair for PVC (SWR) floor trap 100 mm dia of outlet, plain with CP grating including jointing with solvent cemente fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) floor trap 75 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) (using 20mm graded broken stone aggregates)complete all as specified and directed

Material and labour for PCC (1:4:8) type D2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe all as specified and as directed.

Material and labour for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. including making good to floor complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, PVC jet, PVC connection 450/600mm long with PTMT nuts, necessary inlet and outlet connections including making good complete all as specified and as directed.

Supply and fix in repairs vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap or 'S' Trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair for vitreous chinaware wash hand basin with pedestal, white, flat back, size 550x400 mm including pillar tap, fancy type , cast copper alloy, with capstan heads, chromium plated, cast copper alloy, screwed down high pressure, with or without lettered 'Hot' or 'Cold' and fly nuts screwed for iron pipe for 15mm bore, CP waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of required length and all necessary inlet outlet connections including CI brackets complete all as specified and as directed.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repair for vitreous china counter type oval shape wash basin coloured (Pastel) with and including 20mm thick granite top of choice colour as approved over and including 25 to 30mm thick cudappa stone slab of size 0.90m X 0.60m with 75mm wide granite strip duly full moulded on upper face fixed horizontally and 75mm wide granite strip vertically supported by 2 Nos and horizontally 1 No. slab of 40mm thick cudappa stone slab one side mirror polished, making necessary cut in granite and cudappa, CP brass waste coupling of 32mm bore brass chromium plated bottle trap with inlet and outlet, screwed for pipe, including 15mm bore pillar tap fancy type, cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe minimum finished weight 0.665 kg, PVC waste pipe 32mm dia, brass chromium plated waste coupling 32mm dia with check nuts to inlet and outlet screwed for iron pipe or connection including necessary packing, union and cap etc. complete all as specified and as directed. Make : Hindware Cat No. Zen-10049 Pastel or equivqlent from Cera/ Parryware as approved.

Supply and fix in repairs for brass chromium plated, overhead shower rose 100mmX100mm (4"x4") Square Shape (without arm) complete all as specified and as directed. Cat No.F7020307 of make Cera or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix in repair cast copper alloy chromium plated overhead shower arm 305mm(12") long square shape with flange (for wall mounted shower) complete all as specified and as drected. Make: Cera Cat No. F7040202 or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repair for stainless steel sink made of Stainless Steel, 1mm thick with drainage board made of 1mm thick sheet, with plug, washers and waste coupling, 32mm dia. waste pipe, CP grating including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 915 mm x 460 mm with bowl size 410mm X 330mm X 160mm all as specified and directed.

Supply and fix for corner glass shelf of size 250mm radius and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

Supply and fix in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed.

Supply and fix for PVC cabinet with 4mm thick looking mirror, single shutter of size 440mm X 600mm x150mm complete all as specified and as directed. Make: Parryware Cat No. C846M46 or equivalent as per Appx 'A' as approved by GE.

Supply and fix corner shower encloser with two fixed glass 8/10mm thick and openable door fixed on the front panel - 3 part, finish chrome complete all as specified and as directed. Make:Jaquar cat part No JSE-CHR-840G1620H19X or equivalent as per Appx 'A' as approved by GE.

S & F bath tub combi system size 1800mm x 800mm x 470mm including all fittings complete all as specified and as directed. Make: Jaquar cat part No JWP-WHT-KUBIX180CX (whirlpool) or equivalent as per Appx 'A' as approved by GE.

S& F 4 hole bath tub mixer consisting of 2 No, control cocks, 1 spout, 1 Telephone shower with 8 mm dia & 1.5 M long flexible tube complete all as specified and as directed. Make: Jaquar Cat Part No QQT-CHR-7277 (Queens) or equivalent as per Appx 'A' as approved by GE.

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.

Dismantling of stone slabs and chequered tiles of any description or thickness in floor, apron etc., laid bedded and pointed in any mortar complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Dismantling timber scantlings, unframed work, 40 sq. cm and over in section, in any position complete all as directed.

Dismantling timber scantlings, framed work, as in fillets, rails, posts, rafters, purlins etc. under 40 sq. cm in section, in any position complete all as directed.

Dismantling wooden boarding/ plywood of any description and any thickness including fillets fixed in any position with nails complete all as directed.

Dismantling battens for tiles, shingles etc. of any size including tiling fillets spaced exceeding 15cm complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness sheets including Nainital or similar pattern roof coverings/ galvalume/ aluminium sheeting complete all as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing without disturbing existing false ceiling complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Supply and fix for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling and other fittings, PVC waste pipe 32mm dia, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix for continuous (piano) hinges, mild steel, bright finish or electrogalvanised with 30mm wide flaps (when open) complete all as specified and as directed.

Supply and fix in repairs chromium plated grating of 75mm dia complete all as specified and as directed.

Supply and fix in repairs chromium plated grating of 100mm dia complete all as specified and as directed.

M & L Making hole and fixing the metallic packer for injecting hydrophobic PU foam and Sealer for Balancing tank and sump, as per manufacturer’s instruction. (Avg. 1 metallic packer per sq meter.) complete all as specified and as directed. Make : Build core chemicals or equivalent

M&L CORESEAL 357A/ CORESEAL 357 CAT for carrying out waterproofing treatment , by using construction chemical methods such as, 1) HYDROPHOBIC PU GROUTING Including cleaning of surface with wire brush detecting the sources of leakages complete all as specified and as directed.

M&L for second course injection of CORESEAL 135A/ CORESEAL 135B complete all as specified and as directed. Make : Build core chemicals or equivalent

M&L for upper drain by applying two coats of 2 part polymerized bonding and waterproofing coat with a dash coat of plaster when the surface of second coat is wet including preparation the existing surface complete all as specified and as directed.

M&L for Providing and applying SBR modified cement mortars of C.M 1:3 in specified ratio of SBR per bag of cement as per manufacturer specification OR in 1:5:15 ratio to RCC surfaces duly treated as above with appropriate thickness. As per technical specification or as instructed by the Engineer in charge. Followed by white water proofing Elastomeric coating

Material and labour for applying two coats of impermeable PU coat to Over flow and upper drain after the application of Primer complete all as specified and as directed. .

Supply and fix in repairs, aluminium powder coated curtain rod 20 mm dia with fancy type decorative brackets and side caps, fixed to wall including drilling, rawl plug, steel screws etc complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet (pedestal pattern) white rimless single piece with UF soft close seat cover, hinges, fixing accessories, accessories set, Cister and cistern fittings, size 390x710x720mm, P trap or S trap 300mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81853S300UF or equivalent models of Hindware, Cera/Parryware.

Supply, laying and testing for LT XLPE UG cable insulated screened PVC bedded galvanised steel strip or wire armoured, heavy duty electric power cables with stranded aluminium conductor 1100 volts grade with cable glands, lugs etc laid in trenches/ floor, fixed on wall/ pole/ service connections including brass cable glands/ end terminals/ lugs, clamps etc. of size 10 Sqmm 4 core cable including connecting to main switches/ cut outs/ MCCB complete all as specified and as directed. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately.

All as per serial item No.176 here-in-before but for 50Sqmm 3.5 core cable.

Supply and laying 50mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy grade, ivory/ white colour, ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.182 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.182 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.182 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.182 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type fan regulator 120 watt 1 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door prewired type with cable end box , flushed in wall and making good to disturbed surfaces, including connecting with existing cable complete all as specified and directed. Note : Quoted Rate is deemed to inclusive of Stickering/Marking/writing of Quarter numbers in concerned meters as directed by Engr-in-Charge. Make :Havells Cat Part No DHDPSHOSRW08 OR EQUIVALENT L&T/LEGRAND/SCHNEIDER

Supply and fix for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for sheet metal enclosure Vertical TPN, DB, metal door 4 way 415 volts, 50Hz with MCCB incommer and SP/ DP MCBs as out going double door IP 43 with magnetic locking systen, pre-wired including 200 Amps bus bar etc. suitable for operation on 415 volts 50Hz AC supply including necessary provision for inserting the DB in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. Make: L&T Cat No. DBVTL00DD or equivalent of Legrand, ABB

Supply and fix for MCB SPN rated capacity 40 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCCB, tripple pole and neutral, 415 Volts, adjustable type with thermal magnetic release, with breaking capacity 10KA, Ics = 100% Icu with extended terminal including necessary electrical connections suitable for fixing on DB of capacity 63Amps complete all as specified and as directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.

Supply and fix for highly efficient LED bulbs 10W with lumens out put not less than 1000 lumens, used as ready replacement for existing GLS/ CFL direct fit lamp in B-22 cap of make Havells/ Philips/ Wipro/ Bajaj/ HPL as approved complete all as specified and as directed.

Supply and fix for decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10/11watts all as per Cat No.LHGLO6160099 of make Havells or equivalent of make Bajaj, Philips as approved complete all as specified and as directed.

Supply and fix for energy saving new generation 10 watts LED bulk head fitting IP-65 luminaire with opal diffuser prewired and necessary mounting arrangements, provision of 3 core multistranded copper conductor of size 23/0.193 from ceiling rose with LED bulb all as per Cat No.BIBWP 10W LED of make Bajaj/ Philips Cat Part No WT140LED 7SCW PSU or its equvalent in Wipro/ Havells complete all as specified and as directed.

S & F wall mounted LED 20 watts, 4 feet light fitting, 230 volts with lumens out put not less than 2000 lumens with aluminium extruted channel, powder coated with diffuser for glare free light complete with accessoriesl provided for efficient heat dissipation and intregrated electronic driver connector block etc complete internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including necessary LED tube 4' x 20 watts complete all as specified and as directed. Make : Shakti Fittings and Fixtures Cat Part No SZSLAMX020 or Bajaj, Philips, Wipro, Havells, Syska, Jaquar

S & F wall mounted LED 10 watts, 2 feet light fitting, 230 volts with lumens out put not less than 1000 lumens with aluminium extruted channel, powder coated with diffuser for glare free light complete with accessoriesl provided for efficient heat dissipation and intregrated electronic driver connector block etc complete internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including necessary LED tube 2' x 10 watts complete all as specified and as directed. Make : Shakti Fittings and Fixtures Cat Part No SZSLAMX010 or Bajaj, Philips, Wipro, Havells, Syska, Jaquar

S & F for Decorative wall mounted luminaire with Chrome Finish with Opal Glass E27 unbreakable, suitable for LED bulb and including provosion of LED bulb 10/11 watts complete all as specified and as directed. Make- Jaquar Cat part No - JOL-CHR-MB140048T1E or its equivalent in Wipro, Philips, Bajaj, Syska, Shakti, Havells

Supply and fix in replacement for recessed mounted low depth LED luminaire 2'x2' square LED panel 36 watts 596x596x9mm size sleek design aluminium housing, polycarbonate diffuser white powder coated finish operating voltage 140-270 volts, AC, 50 Hz complete all as specified and as directed. Make: CG cat No. LCTLRP-36-FO-CDL 36 W NW, JAQUAR Cat No. LULT02S036XW, Philips cat No. RC380 LED 34S PSU, Bajaj cat No. BZRSQL 36W NW as approved

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 25 watt with high power LEDs as light source and electronic driver with lumens out put not less than 2500 lumens, with prewired all as per Cat No. BCLST 25 W LED I of make Bajaj, Philips Cat No. BRP042 or equivalent of make Wipro/ Havells/ Crompton as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts including taking down old existing unsesrviceable tube light fitting complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver with lumens out put not less than 3000 lumens, with prewired , necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts including taking down old existing unsesrviceable tube light fitting complete all as specified and as directed. Make: Jaquar Cat No. LSRT01S030XW or equivalent of make Bajaj, Philips, Wipro/ Havells/ Crompton as approved

Taking down ceiling fan of any sweep, keeping with safe custody and deposit to EM store yard of AGE EM North including transportation and loading and unloading fan complete all as specified and as directed.

Taking down carefully exhaust fan/ wall mounted fan of any sweep, keeping with safe custody and refixing the same after cleaning dust, oiling, greasing, servicing etc. with replacement of unserviceable PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, complete all as specified and directed.

S&F ceiling fan (after assembling the same) with fan hook/box, 1200mm sweep BEE 5 star rated, 3 blade ISI marked, white colour, 240 volt AC 50 HZ single phase with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat No. ES-50 or Bajaj cat No. Kessals 50 ISI of equivalent of Usha, Orient Electric kiara shine, Crompton.

S&F for wall mounted fan pull chain controlled of size 400mm sweep 3 PVC blade, 3 No. speed, 240 volt AC 50 HZ single phase 1350RPM motor speed double string and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connecter to fan complete all as specified and directed. Make: Bajaj, Usha, Orient, Crompton, Havells.

S&F for wall mounted air circulator fan of size 18 inch (450mm) sweep 3 blade, 4 No. speed, 240 volt AC 50 HZ single phase 1400RPM motor speed, 100 watt, mounted within easy reach of hand vertical adjustable and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connecter to fan complete all as specified and directed. Make: Havells Model V3 or equivalent of Bajaj, Usha, Orient, Crompton.

Supply and fixing of exhaust fan plastic body of 250mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat Part No. Ventil Air DX White, Bajaj Cat No. Maxma DX 10" or equivalent of Cromptoon, Havells

Supply and install water heater storage type (Geyser) vertical type with copper inner container of capacity 25 litres, electrically operated, AC 230 Volts including 04 Nos of hold fastener nuts of required suitable size fixed in brick wall including PVC connection pipe (copper) chromium plated 8mm dia both ends threaded with brass coupling bolts both side, cone washer, not less than 45cm long suitable for hot/ cold water system complete all as specified and as directed. Make: Jaquar Model No. EWJH or equivalent of Havells/ Bajaj

Supply and fixing of exhaust fan metal body of 300mm sweep, 900 RPM, AC single phase, heavy duty including metallic louvers and shutter and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed.

Material and labour for dry sand cushioning in trenches/ ducts for protection of underground cable (below, above and around the UG cable laid in trenches) of 23 cm spread thickness ( 8 cm in depth before laying the cable and 15 cm in depth after laying the cable) and consolidated (punned) up to 18 cm thickness complete all as specified and as directed. Note : - Thickness after punning shall be measured for payment

Material and labour for sub class 'B', old size bricks for cable protection cover, common burnt clay building bricks, laid dry and flat abutting each other with width equal to length of brick and gap between adjacent bricks not exc.10mm complete all as specified and as directed.

Supply and laying for 20mm bore GI tubing light grade laid in trenches as in protection of UG cable at road crossing/ hard standing/ on pole (with necessary MS clamps, nuts, bolts complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I including taking out existing earthing . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Supply & Erecting Hot-dip Galvanised Octagonal Ploes for street lighting in single section of 6Mtrs height Top -70mm dia,Bottom-130mm dia and 3mm thickness sheet. Base plate of minimum dimension 200mm X 200mm X12mm, including foundation bolt (4 nos with 3 nos of nut and washer in each) with decorative single arm bracket for mounting the light fittings 1000mm long bent at an angle of 120 degree with necessary holding brackets, hold fasts etc,bakelite sheet with one 6A SP MCB and 16 sqmm stud type connector (4 nos) inside the pole at door opening for cable connection common templates minimum 1 for each 15 poles complete all as specified and as directed. Note- Earthwork, cement concrete for foundation etc.will be measured and paid under appropriate items.

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC casing and caping and accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLSH copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC casing caping and accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLSH copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

M&L Unscrew from the body of the pressure filter and set aside in safe position all plumbing pipe connections of filter plant installed at RSI swimming pool 3.04 Mtr Length, 2.43 Mtr dia, opening the man hole and removal taking out the old filter media completely from chamber, and depositing the same to a distance not exceeding 100 mtr and re-fixing the pipes in the original existing position after replacement of unserviceable PVC nozzale(Dom Type) including replacement of gasket of manhole cover and necessary nut bolts as required complete all as spcified and directed. Note : (i) PVC nozzale shall be measured and paid separately as supply only here in after.(ii) Filling of Filter media shall be measured and paid separately under respective items of this schedule.(iii) Cost of rubber gasket , Nut bolts of existing size required are deemed to be included in quoated rate

Supply & Fix only PVC nozzle (Dom Type) for pressure filter and iron removal filter complete all as directed by the Engr -in- charge.

M&L Aqua quartz - POOL FILTER SAND, #20 GRADE SILICA, Each Bag ( 50 LB/ 22.6 KG ) Particle size uniform, 100% natural - with no chemicals added, filling in layers in the horizontal pressure Filter, for filtering out debris complete all as specified and as directed. Manufacturer- Splash

M&L Manganese Greens and Filter Media , apperance brown granular filling in the Filter Bed of Pressure Filter, complete all as specified and as directed.

M&L Fresh filter sand Gravels of size 40 mm size suitable for drinking purpose, as approved, filling in the Filter Bed of Pressure Filter, , complete all as specified and as directed.

M&L Fresh filter sand Gravels of size 20 mm size suitable for drinking purpose, as approved, filling in the Filter Bed of Pressure Filter, , complete all as specified and as directed.

M&L Fresh filter sand Gravels of size 10 mm to 12mm size suitable for drinking purpose, as approved, filling in the Filter Bed of Pressure Filter, complete all as specified and as directed.

M&L Fresh filter sand Gravels of size 2 mm to 8 mm size suitable for drinking purpose, as approved, filling in the Filter Bed of Pressure Filter, complete all as specified and as directed.

Supply Install testing and commissioning ( SITC) 3 Phase 415 Volts 50 Hz Horizontal Type open well submersible water pump set single stage , electric motor driven Power 7.5 HP ( 5.5 KW) Pipe size 100x100 mm , Head Range 10-24 Mtr, & Discharge range 1750-550 LPM complete all as specified and as directed. Make CG Cat No OWS7.52G-25 or equivalent

Design, supply, install, test and commissioning weather dust and vermin proof LT cubical panel outdoor, fabricated with 3.15mm thick CRCA MS sheet for load bearing member (outerbody and covers), Inner body / door covers sheet not less then 2 mm thick and shall be painted with epoxy powder paint by means of electro static gun after regorious pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 400 Amps rating TPN bus bars of high conductivity copper alloy and shall be provided with colour coded heat shrinkable sleeves. The minimum depth of panel shall be 400mm. The panel shall be provided with seperate compartments for each switch gear and measuring instruments, the panel shall include instrumentation such as Ampere meter, volt meter, phase indicating lamps etc for incoming withdouble stud hinged door , front and rear openable with locking arrangement suitable for , 3 phase, 415 volts, 50 cycles , AC supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 , The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm embeded 200 mm below ground level in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 600mm above ground level and comprising the following accessories:-

Material and Labour for Earthing with Galvanised Steel Earth Plate Electrode of size 60cm x 60cm x 6mm, thick buried directly in ground ( earth pit not less than 2.25 Metre deep below the Ground Level ) with Top Edge of Earth Plate not less than 1.50 Metre below normal ground level , connected to Galvanised eart lead by means of Bolts, Nuts, Check Nuts and Washers of Galvanised Iron or Steel using GI strip 32x6mm as earthing lead as shown in electrical Plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil , returning filling disposal of surplus soil , earth pit in PCC 1:3:6 Type C1 using 20 mm graded stone aggregrate pit funnel, 40 mm dia GI Medium grade watering pipe , 15 mm dia GI light grade earth lead protection pipe, CI frame and cover , wire copper lugs etc., mesh charcoal and common salt in alternate layer 15 cm including taking out existing earthing complete all as specified and as directed. (Note: GI earth strip and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

M&L Painting to external surface of pressure filter plant installed at RSI swimming pool with two coats of sythetic enamel paints of approved colour over a coat of red oxide primer including neccessary preparation of old surface by means of scraping, brushing, cleaning complete all as directed by the Engr -in- charge.

M&L for PVC insulated and sheathed flat 3 core, Size 6 Sqmm copper stranded conductor water proof submersible cable 1100 Volts Grade , and connecting to submersible Motor pump set & starter securing with necessary clamps along the column Pipes including taking out old unserviceable cable complete all as specified and as directed.

Disconnecting terminal ends of main incoming cable, outgoing cables of any size connected to switch fuse units in panel board and setting aside serviceable cables. Dismantling of existing unserviceable LT Panel board indoor type grounted in floor making good disturbed surfaces of floor for instalation of new indoor panel board in existing place complete all as specified and as directed.

M&L Chlorine test kit with coloured ample complete with all testing fitments and OT solution in Rexene finished box complete all as specified and as directed.

M&L Cast Iron Sluice Valve 100mm bore (4") dia, comply with IS:14846-2000, Class PN-1.6, both Ends Flanged, having Gun Metal Working Parts, Stainless Steel Spindle with Cast Iron Hand Wheel with all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceable Sluice Valve, complete all as specified and as directed.

Supply and Fixing cast iron body and brass gate heavy duty non return valve ( NRV) 100 mm (4”) dia with flanged end all necessary fixing Arrangements such as Gaskets, Mild Steel Nuts, Bolts, Washers, etc. and testing including taking down unserviceablenon return valve ( NRV), complete all as specified and as directed. Make Zolota -1083 Or Equivalent in KSB

M&L SITC Automatic swimming pool dosing system , consisting of (i) Type of pump- Auto solenoid operated electro mechanical design with mechanically linked diaphragm (ii) Flow capacity - 10 LPH (iii) Liquid to be used - 20% Chlorine ( Sodium hypochloride ) (iv) Flow control - ON-OFF by Control Panel ( Manually) (v) Material- PP, Ceramic NRV Ball, PTFE Diaphragm backed by hyplon (vi) Supply- 230 Volt AC / ± 10% , 50 Hz (vii) Other accessories - (Tube) Suction & Discharge tubing of LDPE Material, 2.5 mtrs in length ¼ " Hose holder connection - Strainer cum foot valve , Antisyphon valve in PP built in electrical cable molded with plug (viii) Control Panel ( Automatic) - Control panel for swimming pool dosing system . ( Chlorine & pH can be adjustable according raw water requirements to meet desired chlorine value, pump start & stop through signal from orp sensor & PH Sensor . ORP & PH Sensor to be installed on raw water line. Tank- (MOC:LDPE) - 100 Ltrs (02 Nos) Tank Agitator- Slow speed , PVC MOC , single phase , 230 V , 50 Hz Pump Oty- 02 Nos( One for chlorine+ one for pH control) Make United Engineering ,Model DSSWED-02 or equivalent complete as all specified and as directed

Supply, laying, jointing & testing of Ductile Iron (DI) Pressure 100mm bore (dia) with Spigot & Socket Ends, Centrifugally Cast (Spun) with Cement Mortar Lining in Inner Side confirming to IS : 8392 /2000 in standard length for classification K-9 and other relevant standards and Metallic Zinc Coating followed by a finishing layer of Epoxy Paint in outer side, suitable for Push-on Joint (Rubber Gasket Joint) in any length and laid in Trenches, complete all as specified and as directed Note- Excavation ,DI Specials and rubber gasket joint shall be measured and paid separately .

M&L Rubber gasket joint with rubber to CI and DI Pipes and fittings for 100 mm bore Pipe.

S&F CI Bends taperss, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces but one end flanged and other end spigot and socketed upto150mm bore.

S&F DI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for Pipe upto 300mm bore complete all as specified and as directed

Taking up old cast iron water mains 150mm bore (dia) with all fittings with spigot and socket ends and lead joints inclunding burning out joints and recovering lead. Serviceable Pipes Leads etc keep in safe custody for reuse,etc complete all as specified and as directed.

S & F corrugated steel sheets 1.6 mm thick as in ducts, covering to cable, cut to size edges deaded if directed , holes punched ;including round headed screws, clot nails or rivets and setting aside unserviceable covers complete all as specified and as directed.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

OM INFRA