SPECIAL REPAIRS RENOVATION WORK OF GUEST HOUSE BUILDING P19 MAIN GATE AND OPEN DRAIN AT MANU VIHAR RESIDENTIAL COMPLEX OF DS CELL PUNE UNDER GE MH AND RH KHADKI

Amount

Removing of old water proofing treatment and cleaning the surface of slab and cleaning with wire brush, removing dust,foreign materials and removing the rubbish off the site to a distance n.exc 100mtr complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) on roof top for maintaining of slope coving,benching etc complete all as specified and directed.

Material and labour for rendering 10 mm thick on concrete surfaces of roof in cement plaster 1:3 mixed with WPC @ 3% by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid seperately.

Material and labour for cleaning the plaster /concrete surfaces with wire brushes and applying water proofing treatment ,one coat of bituminious primer @ 0.25 kg per sqm and providing 3 mm thick APP modified water proofing Membrane weight 3.5 to 4.0 kg /sqm by torch application method including painting entire roof surfaces with one coats of bitumastic aluminous paint complete all as specified and directed.

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing or removing to store complete all as specified and directed.

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing or removing to store complete all as specified and directed.

Material and labour for tube medium grade 20 mm dia, galvanized with all fittings fixed complete to wall, ceiling or laid in floors etc. complete all as specified and directed.

Refixing old steel tubing and connection of 20 mm diain new or old position (walls, ceiling ,floor etc complete all as specified and directed.

Material and labour for tube medium grade 15 mm dia, galvanized with all fittings fixed complete to wall, ceiling or laid in floors etc. complete all as specified and directed.

Refixing old steel tubing and connection of 15 mm diain new or old position (walls, ceiling ,floor etc complete all as specified and directed.

Supply and fix in repairs, gun metal globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Dismantling water tank of any description of capacity 500 ltrs complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tanks ( cylindercal veritcal with closed top) hoisted and fixed inposition 500 ltrs capacity complete all as specified and directed.

Dismantling water tank of any description or capacity 1000 ltrs complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tanks ( cylindercal veritcal with closed top) hoisted and fixed inposition 1000 ltrs capacity complete all as specified and directed.

Supply and fix ball brass valve 20 mm dia high pressure with poly-thine float and fly nut of pipe, complete all as specified and directed.

Taking down chowkats and frame n.exc 1.5 Sqm incl shutter with out taking off shutters from frame complete all as specified and directed.

Taking down chowkats and frame exc 1.5 Sqm and n.exc 4.0 sqm incl shutter with out taking off shutters from frame and removing from site complete all as specified and directed.

Taking down wooden shutters exc 1 sqm and n exc 2 sqm each complete all as specified and directed..

Supply and fix aluminium louvered ventilators of section size 100mm x 25mm x 1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc complete all as specified and directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100 x 35 x 1.20mm and shutter 39.40 x 17.70 x 1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats , glazing clips, rubber packing powder coated aluminium snap beading screw with and including 4mm thick plain float glass and 0.36mm dia and average width of aparture 1.4mm. SS wire mesh ,fitting etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade including taking down existing steel window complete all as specified and directed.

Supply and fix Framed work such as grills, gratings etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and directed.

Supply and fix Pressed steel door frame of size 105 x 60mm for doors with one or more rebate incl necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

Supply and fix Pressed steel door frame of size 125 x 60mm for doors with one or more rebate incl necessary fixing lugs, hinges lock strike plate, etc complete all as specified and directed.

Supply and fix Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Material and labour for flush shutters 30mm thick solid core constructions with block board core , ply wood face panels commercial type on both side complete all as specified and directed.

Supply and fix 30 mm thick 2nd class H.W glazed or skeleton shutter open rebated divided intosquare with plain chamfered or rounded mitred and rebated with out sash bar andprepared to receive gauze or glaze, size of members as per clause 8.20 (a) of SSR pt-1 complete all as specified and directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing including all fitings in opening as per specification & drawing complete all as specified and directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plane colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply and fix stainless steel wire cloath 0.56 mm nominal dia of wire and average width of aperature 1.18mm including fixing with wooden/steel batten complete all as specified and directed.

Material and labour for Aluminium alloy barrel tower bolts of stove enamelled blackwith bright bolt and fixed 150mm long complete all as specified and directed.

Supply and fix butt hinges medium weight colled rolled mild steel 100 mm long and fixed complete all as specified and directed.

Supply and fix Aluminium alloy sliding door bolt 300 mm long, plate type,stove enamelled black with bright bolt not less than 12 mm dia with and incld mild steel min of 6 bolts and nuts, 4 on bolt plate and 2 on stapleplate fixed/weldedto door shutter/frame complete all as specified and directed.

Material and labour for Aluminium alloy pressed oval type handles stove enamelled blackfor doors 150 mm long complete all as specified and directed.

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water etc. complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Material and labour for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 complete all as specified and directed.

Material and labour for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of ceiling in CM 1:4 complete all as specified and directed.

Material and labour for ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 15mm thick in CM 1:6 complete all as specified and directed.

Material and labour for coloured Non Skid ceramic tiles 300 x 300 x 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 15mm thick in CM 1:6 complete all as specified and directed.

Material and labour for coloured Glazed ceramic tiles in vertical surface of size 300mmx450mm x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement plaster 10mm thick in CM 1:4 complete all as specified and directed.

All as per item No 41 above, but in riser, step, skirting, dados and pillar over and including 10 mm thick plastering in CM 1:4 complete all as specified and directed.

Material and labour for Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed with white cement and adhesive of pigment to match theshade incl cutting and polishing laid over and including cement screed 10mm thick in CM 1:4 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Material and labour as in repairs for kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes incl bedding in CM to dewarf wall inclfitting cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs soap dish vitirous china of approxmate size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12mm wide with CP bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repair 20mm dia CP curtain rod complete all as specified and directed.

Supply and fix bracket of fancy type curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) complete all as specified and directed.

Supply and fix in repairs aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fix in repairs stopvalves cast copper alloy screwed down high pressure withcrutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

Supply and fix in repairs bib taps CP Brass with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm dia complete all as specified and directed.

Supply and fix brass CP shower rose 125mm size with swivel joint incl fixing to steel pipe fixed in repairs complete all as specified and directed.

Supply and fix in repaires Health faucet brass chromium plated with connecting decorative pipe including all accessories required for fixing of 15mm bore of pipe complete all as specified and directed.

Supply and fix in grating dome 125mm dia without waste hole of PTMT minimum weight 40 grams complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1 (uisng 20mm graded stone aggregate) 75 mm thick as in Plinth, Path, floor with fair finish surface with out using extra cement complete all as specified and directed.

Forming contraction (Dummy) joints 65mm deep X 10mm wide, filled with sealing compound grade B complete all as specified and directed.

Supply and fix in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and directed.

Supply and fix in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot or Cold Withlong screwed shanks and fly nuts screwed for iron pipes 15mm dia complete all as specified and directed.

Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover, complete all as specified and directed.

Supply and fix in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe,brackets complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in coping, hold fast block, bed bolck, filling pressed steel door frame etc complete all as specified and directed.

Material and labour for preperation of new wall surfaces and finishing with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over and including 3mm thick wall care putty finished even and smooth complete all as specified and directed.

Material and labour for complete removal of existing treatment & applying two coats of oil bound distemper of approved colour and pattern over and including a coat of primer over and including 3mm thick wall care putty finished even and smooth complete all as specified and directed.

Material and labour for Complete removal of existing treatment on ceiling & applying three coats of white wash over and including 3mm thick wall care putty finished even and smooth complete all as specified and directed.

Demolition of stone/brick /PCC block masonry built in cement mortar or cement lime mortar complete all as specified and directed. .

Material and labour for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.

Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 110mm dia PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix 75mm dia PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix 110mm dia PVC (SWR), branch piece single (Single Y) equal or unequal complete all as specified and directed.

Supply and fix 75mm dia PVC (SWR), branch piece single (Single Y) equal or unequal complete all as specified and directed.

Supply and fix in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair CP two way bib taps screwed for iron pipe 15mm bore and fixed necessary fitting with and incl PVC connection complete all as specified and directed. (Cat part No F1016473 of CERA or equvalent in jaquar/Somany)

Supply and fix PVC connections 15mm size with PTMT nuts of 600 mm long complete all as specified and directed.

Material and labour for 100mm dia CI Nahani trap,with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) (20mm graded stone aggregate) complete all as specified and directed.

Material and labour for machine cut cudappa stone slab 20 to 25mm thick over and including cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons Laid,bedded and pointed in any mortar etc complete all as specified and directed.

Supply and fix in repair 19mm thick prelaminated particle board, interior grade, prelaminted both side decorative choice lamination, fixed with screw to timber frame work complete all as specified and directed.

Supply and fix Continuous (piano) hinges 40mm Width of flaps (when open),mild steel, bright finish or electro galvanised complete all as specified and directed.

Material and labour for Rendering 15mm thick, on fair faces on brick masonry surfaces or concrete surfaces in CM 1:4 including WPC complete all as specified and directed. Note: WPC shall be measured & paid separately.

Supply only water proofing compound complete all as specified and directed.

Providing and carryout waterproofing treatment to toilets,sunken floor slabs,wet areas etc.after proper surface preparation, carryout cementitious injection grouting at leakage points using cobex 100 plasticised expansive grount admixure,application of polimer modified vatta at slab and wall juction using nitobond SBR latex-screed modifier cum bonding agent and application of two coats of brush bond RFX - two- part acrylic polymer modified cementious elastometic water proof and protective coating etc,complete including all tools and tackles as per manufactures specification complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete, for sunken floor complete all as specified and directed.

Material and labour for Machine cut KOTA stone slab flooring 20 to 25mm thick laid and jointed inneat cement slurry mixed with pigment to match the shade including cutting and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for factory made 35mm thick plain, framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part l), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for painting to wooden surfaces of any description over 10 cm width or girth incld prepration of new or untreated surface and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

Material and labour for vitrified tile in step in one piece 12mm thick(square/rectangular) in riser of step and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 10mm thick in CM 1:4 complete all as specified and directed.

Material and labour for vitrified tile in step in one piece 10mm thick (square/rectangular)in floor of step and landing etc set and jointed in neat cement slurry and ponted in white or coloured cement to match the shade of the tiles laid over and including cement screed 15mm thick in CM 1:6 complete all as specified and directed.

Supply and fix in repair bathroom cabinet mirror (of approved pattern) of size 450mm x 350mm regular size with mirror and PVC shelves complete all as specified and directed.

Fixing only wash basins, Vitreous China (flat back or angle back type) any size, Only Fixing including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps, cills,sunshades, shelves, lintels, etc.;and brick wall cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floors and pavings n.exc 15 cm thick below or above ground level complete all as specified and directed.

Demolition and breaking up drain pipes of 300 mm bore RCC/SGSW set in cement mortar and taking out from trenches if required complete all as specified and directed.

Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for Cement concrete 1:3:6 Type C2 (40mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

Labour only for Pre-cast cement concrete block masonry (except solid blocks), exc. 10 cm in width and setting in mortar 1:4, complete all as specified and directed.

Material and labour for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in copings, filleting etc complete all as specified and directed.

Supply and fix Reinforced cement concrete pipes of 300 mm dia, class NP2, laid and jointed complete with collars complete all as specified and directed.

Material and labour for Pre-cast RCC 1:2:4 type B1 Using (20mm graded stone aggregate) as in cover slabs including necessary formwork set in CM 1:4 complete all as specified and directed. Note :Reinforcement shall be measured and paid separately .

Material and labour for TMT 10mm and over bars cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia confirming to Fe 410-0 or Fe 410-S complete all as specified and directed.

Ditto as per item No. 106 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position any any thickness complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Removing excavated material exc. 250 mtr but n.exc. 500 mtr and depositing where directed complete all as specified and directed.

Material and labour for RCC 1:2:4 type B1 (Nomonal mix) (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for RCC 1:2:4 type B1 (Nomonal mix) (20 mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde E-250) quality B complete all as specified and directed.

Supply and fix 1mm thick powder coated aluminium panel (ACP)including necessary aluminium frame work fixed over steel and RCC frame work complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete fixed over and including backing coat of 10mm thickin CM 1:4 complete all as specified and directed.

Material and labour for coloured Exterior Alleviation Brick wall Cladding tiles in vertical surface of size 215mmx55mm x 10 to 12mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 10mm thick in CM 1:4 complete all as specified and directed.

Material and labour for 80mm thick M-40 coloured glossy finished interlocking tiles/ paver blocks any shape and size , jointed & pointed in neat cement slurry with pigment to match the shade of tile etc complete all as specified and directed.

Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and spikes in gate fixing Fe410-W Gde E-250 Quality 'A' complete all as specified and directed.

Material and labour for sand/ stone dust filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for preparing new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for two coats of cement base paint on newly plastered surfaces of walls including preperation of new surfaces complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, Fan, socket,Geyser or power) complete (fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody for credit (credit for above items should be made as per conditon of material separately) and making good distrubed surfaces of wall/floor/ceiling etc complete all as specified and directed

Material & Labour for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade, PVC Conduit of suitable size concealed in walls/ceilings, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , for house modular socket , bell with modular plate switch/regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer in charge for the following :- Make Polycab /Finolex/ RR

One fan/light point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

Bell /buzzer point controlled by one bell push.

One light point controlled by two no of two way switch two way point

All as per Item No 124 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 2.5 sqmm as earth continuity conductor for one switch socket outlet 15 Amps on independent board through and including medium PVC conduit complete all as specified and directed by Engineer in charge.

All as per Item No 124 here-in-before but with 4.0 Sqmm PVC insulated multistranded copper conductor cable including 4.0 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 4 sqmm as earth continuity conductor for power socket (AC/Geyser) on independent board through and including medium grade PVC conduit complete all as specified and directed by Engineer in charge.

Material & Labour for sub main wiring in repair but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into and including medium grade PVC Conduit concealed in wall of suitable size including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface complete all as specified and directed by Engineer in charge. Make:- Polycab /Finolex/ RR

All as per item No. 127 but of cable size 4 sqmm 1100 volt grade drawn into and including PVC conduit complete all as specified and directed.

All as per item No. 127 but of cable size 6 sqmm 1100 volt grade drawn into and including PVC Conduit complete all as specified and directed. Note for item 127, 128 & 129. Two run of single core PVC insulated multistanded copper conductor cable & one run of PVC insulated copper conductor cable green in colour with one run of PVC pipe medium grade shall be measure and paid one unit (RM) length.

Supply and fix in repairs Bell push, Modular type, 6 Amp flush type , 240volt AC complete all as specified and directed.

Supply and fix in repair electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix in repair modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular switch 2 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular socket 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular switch 16A 2/3 pin combined 1 module complete all as specified and directed.

Supply and fix in repair ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary plastering work and finish with existing wall paint complete all as specified and directed.

Supply & fix sheet metal enclosures in repair for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated copper bus bar, concealed in wall suitable for fixing MCB /Isolators complete all as specified and directed.

Supply & fix sheet metal enclosures in repair for double door distribution board factory made duly painted 4 way SPN and neutral 240 v with 200 amps rated copper bus bar, concealed in wall suitable for fixing MCB /Isolators complete all as specified and directed.

Supply & fix sheet metal enclosures in repair with socket plug top and MCB 20 amp double pole factory made duly painted 240 v, concealed in wall suitable for fixing gyser /AC complete all as specified and directed.

Supply & fix in repair MCCB 125 Amps, 4 pole, breaking capacity 16 KA, 415 V adjustable type complete all as specified and directed.

Taking down unservicable metal box & supply and fix sheet metal enclosures for double door distribution board factory made duly painted 4way TPN and neutral 440 v with 200 amps rated bus bar concealed in wall, suitable for fixing MCB /Isolators complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, 240V, 10 KA 'B' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No. 143 but SPN 32 Amps complete all as specified and directed.

Taking down old unserviceable fitting and Supply & fix wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4feets long) lumen 2000 to 3000, PF> 0.95, THD less 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement complete all as specified and directed.

All as per item No. 145 above but 10 Watt ( 2 feets long) complete all as specified and directed.

Taking down old unserviceable wall bracket light fitting of any type & Supply & fix wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting in wooden housing , glass and B22/E27 holder complete including inverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10 watts including necessary eletric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed.

Taking down old unserviceable fitting and Supply & fix high quality Recess/Surface mounting slim LED flat panel 1'x1' made of die cast aluminium housing with high efficient LEDs glare free opal diffiuser, HLFPS11-02-18-CW with IP 20 protection complete as per site requirement connecting with three core flexible copper wire complete all as specified and directed.

Taking down old unserviceable bed side lamp fitting and Supply & fix decorative wall mounted energy saving 3 watt LED bedside light fitting flexible and adjustable to any direction with integral electronic driver complete with all accessories Cat part No -48042 of Phillips or equivalent in Havells/ Jaquar, to be mounted on wall of the bed including connecting with three core flexible copper wire complete all as specified and directed.

Taking down old unserviceable Bldg security light and supply and fix high efficent LED building security light 30 watt/36 watt, 230 V, lumen 2000 to 3000, PF> 0.95, THD less 10%, made of pressure cast aluminuim housing with high power LEDs, lens and toughned glass IP 66 connecting with three core flexible copper wire from connector to ceiling rose complete all as specified and directed.

Supply & fix in repair bracket for mounting building security light made out of 40 mm dia Light Grade GI pipe of length of bracket not less than 1.2 mtr, bend in angle with holding MS clamps two nos each bracket of size 25x3 mm including screw/Nut Bolts etc for fixing complete all as specified and directed by Engineer in charge.

Taking down old unservicable ceiling fan & supply and fixing ceiling fans complete with blades, down rods, electronic regulator/REMOTE and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) (Old fans to be deposited in MES stores) complete all as specified and directed.

Taking down old unservicable exhaust fan & supply and fix exhaust fan, steel body AC single Phase 230V heavy duty of size 300mm sweep with, blades, and frame and louvers (Old fans to be deposited in MES stores) complete all as specified and directed. Note : (i) To be Fixed in Existing kitchen/toilet window (ii) The rates are inclusive of any civil work required to fix the exhaust fan.

Supply and fix wall mounting fan of capacity 400mm sweep, double string, copper wounded, AC single Phase. 230V heavy duty with air delivery 65CMM, silent operation complete all as specified and directed.

Taking down unservicable earthing and Material & Labour for earthing complete with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 (20mm graded stone aggregate) RCC 1:2:4 type B1 (20 mm graded stone aggregate) cover, 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt & charcoal including, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board complete all as specified and directed. Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engineer in charge.

Supply & fix in repair meter panel box indoor type wall mounting with locking arrangement including powder coating siemens grey shade for size 600 (w) x 500 (h) x 250 (d) mm. with the provision of MCB mounting channels suitable for mounting 01 nos three phase meter complete all as specified and directed.

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable in repair with stranded aluminium conductor of size 70 Sqmm 3.5 core, 1100 volts grade confirming to IS-7098 (Part-I-1988) laid in trenches/ducts/wall / floor / pipes/ poles including cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as specified and directed by Engineer in -Charge. (for bldg No P-19) Make :- Havells / Finolex / Polycab

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

All as per item No. 158 but in hard/dense soil.

Removing excavated material soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

Material & Labour for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as specified and directed. Note - Punned thickness shall only be measured & paid .

Supply and laying un-reinforced precast concrete cable cover LV, Type I, flat, size 250mm x 150mm x 40mm for under ground cable complete all as specified and directed.

Supply and laying GI tubes light grade, galvanized, 50 mm bore in repair ,laid in trenches or under floor or fixed with poles/walls for protection of electric cable complete all as specified and directed.

Material & Labour for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) of 150mm x 100mm in respect of width and thickness complete all as specified and directed.

M/S J J ENTERPRISES (BID ID -3412144)

M/S JAYCONSTRUCTION CO (BID ID -3413515)

Sunrise Traders (BID ID -3413596)

S V CONSTRUCTION (BID ID -3414250)

SAMBHAJI D JARANDE (BID ID -3413026)

BHABA CONSTRUCTION (BID ID -3413606)

M/S SANDEEP CONSTRUCTION COMPANY (BID ID -3413667)

M/S SUGAM CONSTRUCTION (BID ID -3413888)