Repair Polishing Painting of all Wooden and Steel Furniture at INS Mandovi under GE Gomantak

Amount

A) Removal of following existing unserviceable wooden components of various MES F/DB/FD furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing everypart in-tact and polishing/painting the disturbed portion, as applicable as per drgs B) Work will be executed where the furniture exist in different User Units of GE Gomantak including BSO's Furniture Yard at INS Mandovi as directed by Engineer-in-Charge. C) Timber shall be of second class hard wood

Bin Soiled Linen (Large/Small) (FD-15,244)

a) Canning on both sides as per drg

b) Ply at top as per drg

c) Front or back ply as per drg

d) Leg as per drg

Bed Plywood Top / Hard Bed (FD-246, 213)

a) Long rail as per drg

b) Short rail as per drg

c) New Foot Board as per drg

d) New Head Board as per drg

e) Middle Stiffeners as per drg

f) 12mm ISI Marked ply for Bed top as per drg

g) Removing existing unserviceable Vineer from the side of Head rest of bed plywood top/Hard bed and fixing the same size vineer all as per drawing.

h) Removing existing unserviceable Vineer from the side of Foot rest of bed plywood top/Hard bed and fixing the same size vineer all as per drawing.

Chair Dining (FD 16, 271, 228, 279, FD/MAP-II/05 )

a).Bottom Stiffner as per drawing

b).Horizontal Back rest of, Chair Dining, Chair WBB

c) Rear legs as per drg

d) Front Leg as per drg

e) PVC Seat as per drg

f) Canning as per drawing

g) S & F triangular teakwood bracket of size 60 x 60 x 25 mm as per drg and as directed by Engr-in-Charge

Chair Dining Long Back with cushion (WDF 2192, 211 , FD 357 & FD/E6/MAP/04, FD/E6/MAP/10 (R))

a) Rear legs as per drg

b) Front Leg as per drg

c) Fornt, Rear, Side Rail as per drawing

d) Stiffner as per drawing

e) Verticle Strip of Back rest as per drawing

f) Seat & back cushion with tapestry cloth as per drawing

g) S & F triangular teakwood bracket of size 75 x 75 x 25 mm as per drg and as directed by Engr-in-Charge

Chair Easy (FD-17, 229 )

a) Rear legs as per drg

b) Front Leg as per drg

c) Cane patti as per drawing

d)Arm Rest as per drg

e) Fornt, Rear side rail

f) Back rest stiffner

g) Canning as per drawing

h) S & F triangular teakwood bracket of size 75 x 75 x 25 mm as per drg and as directed by Engr-in-Charge

Chair writing/CBA (FD 20 ,250, 280 )

a) Rear/front legs as per drg

b) Front,rear,side rail as per drg

c) Cane patti as per drawing

d) Stiffner as per drawing

e) Horizontal Back rest

f) Arm Rest as per drg

g) Canning as per drawing

h) S & F triangular teakwood bracket of size 75 x 75 x 25 mm as per drg and as directed by Engr-in-Charge

Peg Table (FD-25, 236, 277, 384)

a) Table Top with 18mm thick MDF board with 6mm wooden beeding all around the top all as per drg

b) Legs as per drg

c) Short rail as per drg

d) Long rail as per drg

e) Stiffner as per drawing

f) S & F triangular teakwood bracket of size 60 x 60 x 25 mm as per drg and as directed by Engr-in-Charge

Side Board (FD-26, 241, 371, FD-1112)

a) Top with 18mm thick MDF board with 6mm wooden beeding all around the top all as per drg

b) Back ply as per drg

c) Door shutter as per drg

d) Drawer as per drg

e) Knob as per drg

f) Base leg as per drawing

Sofa Set single chair / Three seater (FD 281, 373, 258 FD /MAP/II/02)

a) Removing U/S Cushion from Sofa set and supply and fix new Cushion 100mm thick & 40 density as per drawing of make-Kurlon, Sleepwel, Coolfoam.

b) Removing U/S Cushion cover from Sofa set and supply and fix new Cushion cover duly stiched along with Zip facility and the tepastry cloth of cushion over shall not be less than 450/- per meter. The tepastry shall be approved by GE/Engr-in-Charge.

Table 3'X2' or 900X600mm with / without Drawer (FD-41, FD-42, FD-55, FD-283,FD-284, & FD-41 (M))

a) Table Top with 18mm thick MDF board with 6mm wooden beeding all around the top all as per drg

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Long Stiffener as per drg

f) Short stiffener as per drg

g) Drawer as per drg complete

h) Knob as per drg

j) S & F triangular teakwood bracket of size 75 x 75 x 25 mm as per drg and as directed by Engr-in-Charge

Table Bed Side (FD-28, 248, 276)

a) Top as per drawing

b) Back ply 06 mm as per drg

c) Shelf as per drg

d) Side as per drg

e) Drawers complete as per drg

Table Centre (FD-29, 235, 274)

a) Table Top with 6mm wooden beeding all around the top all as per drg

b) Legs as per drg

c) Top long rail as per drg

d) Top Short rail as per drg

e) S & F triangular teakwood bracket of size 60 x 60 x 25 mm as per drg and as directed by Engr-in-Charge

Table Dining 6 Persons (FD- 30, 239, 273)

a) Table Top with 6mm wooden beeding as per drg

b) Legs as per drg

c) Top long rail as per drg

d) Top Short rail as per drg

e) S & F triangular teakwood bracket of size 100 x 100 x 25 mm as per drg and as directed by Engr-in-Charge

Table Dining 8 Persons (FD- 30, 273)

a) Table Top with 6mm wooden beeding as per drg

b) Legs as per drg

c) Top long rail as per drg

d) Top Short rail as per drg

e) S & F triangular teakwood bracket of size 100 x 100 x 25 mm as per drg and as directed by Engr-in-Charge

Table Dressing Gents (FD- 31, 230, 379, FD/E6/MAP/16)

a) 06mm Back ply for mirror frame as per drg

b) Mirror only as per drawing

c) Knob as per drg

d) Drawer complete as per drg

Table Dressing Ladies (FD- 32, 251)

a) 06mm Back ply for mirror frame as per drg

b) Mirror only as per drawing

c) Drawer complete as per drg

d) Knob as per drg

e) Aluminium Channel for Glass as per drg

f) Plain Glass as per size and drg

Table Writing (FD-33, 249, 275)

a) Table Top with 6mm wooden beeding all around as per drg

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Long Stiffener as per drg

f) Short stiffener as per drg

g) Drawer as per drg

h) Knob as per drg

j) Sides of cabinet with 18mm thick pre-laminated particle board as per drg

k) 18mm thick prelaminated particle board Cabinet door along with piano hinges as per drg

l) S & F triangular teakwood bracket of size 100 x 100 x 25 mm as per drg and as directed by Engr-in-Charge

Teapoy (FD-34, 232, 278,382)

a) Top with 6mm wooden beeding all around as per drg

b) Legs as per drg

c) Top long rail as per drg

d) Top Short rail as per drg

e) Long Stiffener as per drg

f) Short stiffener as per drg

g) S & F triangular teakwood bracket of size 60 x 60 x 25 mm as per drg and as directed by Engr-in-Charge

Stool Dressing (FD-27,282)

a) Legs as per drg

b) Canning as per drawing

c) Side rail as per drawing

Removing old U/S PVC/Rubber Shoe from all types of Chairs and Tables and S & F new PVC/Rubber Shoe as per drg. (FD- 16, 271, 228, 279, FD/MAP-II/05, WDF-2192, 211, 357, FD/E6/MAP/04, FD/E6/MAP/10 (R), 17, 229, 20, 250, 280, 25, 236, 277, 384, 41, 42, 55,283, 284, 41(M), 29, 235, 274, 30, 239, 273, 32, 251, 33, 249,275, 34, 232 ,278, 382, 27, 282)

D) M&L for applying two coat of touchwood/french polish, Make-Asian to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and directed by Engineer-in-Charge. E) Work will be executed where the furniture exist in different User Units & OTM/Md Accn at INS Mandovi under the jurisdiction of GE Gomantak Vasco including BSO's Furniture Yard at INS Mandovi as directed by Engineer-in-Charge

Almirah Mess Utensils (FD 93)

Bin soild Linen Large/Small (FD 15,244)

Bed with plywood top (FD-213, FD-246)

Board Notice (FD 99 (M) FD-117(M),)

Book Shelf (FD-45 (M), DB-4121)

Box for Key (FD-101)

Chair Easy (FD-17, ,229 & WDF-25)

Chair dining with long Back/Officer (WDF/2/93 & FD-357, FD/E6/MAP/10(R) )

Chair dining /Chair CBB/chair WBB (FD-16, 203, 228,FD-279 , FD-56)

Chair writing/CBA (FD-20, 202, 250 & FD-280)

Desk Stand Lecture (FD-125)

Hat stand with mirror (FD-23 FD-233 )

Mirror with Shelf (FD 52)

Peg table (FD 25,236,DB 277)

Side Board (FD 26,241)

Sofa single seater (FD 281,FD/MAP-II/02)

Sofa three seater (FD 281 & FD-258/85)

Stool dressing (FD-27, FD-282 & FD-374)

Table dressing gents with mirror (FD-31, FD-230, FD-250, FD/E6/MAP/16)

Table dressing ladies with mirror (FD-32, FD-251 & FD-378)

Table 900 x 900mm (FD-88, FD-273)

Table 3' x 2' with drawer/without drawer (FD-41, FD-42, FD-55, FD-283,FD-284, FD-283 & FD-41 (M))

Table library/conference (FD-8 (M))

Table bed side (FD-28, FD-248, FD-276 )

Table centre (FD-29, FD-235, FD-274)

Table dining for six persons (FD-30, FD-239, FD -273)

Table dining for eight persons (FD-30, FD-239, FD-273)

Table writing (FD-33, FD-275 & FD-249)

Teapoy (FD-34, FD-232, FD-278, FD-382)

A) Removal of following existing unserviceable components of various furniture items given below carefully without disturbing the adjoining parts and supply & fixing new components confirming to IS and as approved as mention below.All steel surfaces from inside and outside shall be given two coat of existing synthetic enemel paint over a coat of red oxide metal primer after tightening the joints,placing every part in tact. Apart from BSO furniture yard the repairs will also be carried out in various units as and when required as per drgs and as directed by Engineer-in-Charge.

Almirah Large Steel Half Hanging Half Shelf /Cadet steel (FD-114, FD/E6/MAP/18, WDF-49/07 & WDF 116)

a) 3-Way locking assembly with iron plate and 02 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) MS Lock as per drg

g) MS Hinges as per drg

h) Looking mirror as per drg

j) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Almirah Large Steel with shelves/Glazed (FD-67(M), FD-1031, FD-104)

a) 3-Way locking assembly with iron plate and 02 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) MS Lock as per drg

g) MS Hinges as per drg

h) Glass as per drg

j) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Almirah Steel Medium with shelves (FD-1032, FD-67, FD-243, FD-350)

a) 3-Way locking assembly with iron plate and 02 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) MS Hinges as per drg

f) Shelf as per drg

g) MS Lock as per drg

h) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Locker Bed side Steel (FD 1029)

a) Handle as per drg

b) Leg as per drg

c) Door as per drg

d) Shelf as per drg

e) Hasp & Staple as per drg

f) MS Hinges as per drg

g) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Book Case Steel (FD-90, FD-1028)

a) New Glass as per size and Drg

b) Handle as per drg

c) MS Lock as per drg

d) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Bed Hard ply top steel {FD/E6/MAP/08 (R) }

a) 12mm thick ISI Marked plywood as per size and drg

b) 18 mm prelamineted MDF Board for Head/Foot rest as per drg

c) Legs as per drg

d) Upper Long Rail as per drg

e) Upper Short Rail as per drg

f) Stiffner as per drg

g) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Charpoy IP with plywood top ( FD/MAP-II/01)

a) 12mm thick BWR grade plywood confirmng to IS

b) Legs as per drg

c) Upper Long Rail as per drg

d) Upper Short Rail as per drg

e) Stiffner as per drg

f) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Charpoy GI Ply top (FD-220 )

a) Removing the existing U/S long rail and S&F new long rail with 32mm Dia GI Pipe including both end threaded suitable for fixing elbow complete all as shown indrg as specified and directed

b) Removing U/S broken short rail and fixing new short rail made out of old broken long rail obtained from 8 (a) above including both end threaded suitable for fixing elbow complete all as shown indrg as specified and directed

c) Removing U/S broken leg and fixing new leg made out of old broken long/short rail obtained from 8 (a) & 8 (b) above including one end threaded suitable for fixing elbow complete all as shown indrg as specified and directed

d) Removing of U/S elbow 3 way and supply & fix new GI elbow 32mm dia ISI marked all as shown in drg as specified and directed

e) Removing of U/S checknut and supply & fix new checknut all as shown indrg as specified and directed

f) Removing existing U/S plywood top from charpoy GI pipe and supply and fixing new 12mm thick plywood ISI marked BWR grade including refixing of existing stiffner with 5mm machin screw at equal distance to GI pipe frame of charpoy and fixing the plywood top with 5mm MS machin screw 75mm long with counter shunk head at one end and other end screwed with washers and one hexagonal nut and applying two coats of synthetic enamel paint to stiffeners after one coat of red oxide primer complete all as shown indrg as specified and directed Make: greenply, Archidply, Century

g) Provisioning of MS angle iron 25 x 25 x 3mm x 900mm long of size, rest on both long rails and fixing the MS angle iron with 5mm MS machin screw 75mm long with counter shunk head at one end and other end screwed with washers and one hexagonal nut to fix the plywood complete all as specified and directed

Chair Computer / Revolving (FD/E6/MAP/01, TP)

a) Chair Base PVC with five wheels as per drg

b) Arm as per drg and as directed by Eng in charge

c) Caster Wheel as per drg

d) Tapestry of seat/Back as per drg

e) Hydraulic system of chair all as per drg and as directed by eng in charge

f) To fix nut and bolt of chair computer as required

Chair writing / Chair Visitor (FD/E6/MAP/12, TP)

a) Removing of existing U/S seat ply including cushion foam and tapestry of chair wiriting MAP and S&F with new seat ply including cushion foam and tapestery as shown in drg.

b) Removing of existing U/S back ply including cushion foam and tapestry of chair wiriting MAP and S&F with new back ply including cushion foam and tapestery as shown in drg.

c) Removing of existing U/S tapestry of seat of chair wiriting MAP and S&F with new tapestery as shown in drg.

d) Removing of existing U/S tapestry of back of chair wiriting MAP and S&F with new tapestery as shown in drg.

e) Removing of existing U/S handle of chair wiriting MAP and S&F with new handle as shown in drg.

f) Rejoining the base of stiffner with spot welding of broken joints not exceeding 25mm in length as and where required as per drg.

g) Removing U/S PVC beading from seat and back of existing chair writing and S&F new PVC beading in eat and back of chair wrting as per drg.

Chair Verandah (FD-256, 359)

a) Removing of U/S canning of seat of chair verandah and recanning of seat of chair verandah with new cane as per drg

b) Removing of U/S canning of back of chair verandah and recanning of back of chair verandah with new cane as per drg

Chair School with Hand Board/Chair Desklet (FD/E6/MAP/17)

a) Hand board made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with PVC beading all around as per drg

b) PVC Seat in blue colour as per drg

c) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Chair CB steel with Arms (FD-75)

a) Seat made with 40mm thick cushion on 12mm thick plywood with rexin of good quality

b) Back made with 40mm thick cushion on 12mm thick plywood with rexin of good quality

c) Arm rest as per drg

d) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

e) Welding Clits made out of MS flat bar 25mm X 3mm thick and 40mm long with a hole to to fix the seat & back as per drg

Table Office Clerk Steel (FD-84(M), FD-381)

a) Legs as per drg

b) Lock of drawer as per drg

c) Drawer as per drg

d) Stiffeners as per drg

e) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

f) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Table Office Officer Steel (FD-84(M), FD-1002, FD-1003)

a) Legs, as per drg

b) Lock of drawer as per drg

c) Drawer as specified & as directed by Engr-in-charge

d) Stiffeners as per drg

e) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

f) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Table bed side steel {FD/E6/MAP/ 15 (R)}

a) Legs, as per drg

b) Top as per drg

c) Table sides as per drg as directed by Engr in Charge.

d) Drawer as per drg

e) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Teapoy Varandah (FD-35, 255, FD/E6/MAP/17)

a) Legs, as per drg

b) Top shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

c) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

PVC Shoe for all types of Bed, Charpoy, Tables,Chairs,Teapoy Verandah, Table bed side (FD/E6/MAP/08 (R), FD/MAP-II/01, FD/E6/MAP/12, TP FD/E6/MAP/17, FD-75, FD-1009, FD-84(M), FD-381, FD-84(M) , FD-1002, FD-1003, FD/E6/ MAP/ 15 (R) , FD-35,FD 255, FD/E6/MAP/17)

B) M&L for preparing all old painted surface and removing dents & bents if required of following items and applying two coat of synthetic enamel paint of TA GREY/OG/BLACK or Existing color and all external surface complet. B) Work will be executed where the furniture exist in different User Units at OTM/Md Accns at INS Mandovi under the jurisdiction of GE Gomantak Vasco including BSO's Furniture Yard and all as directed by Engineer-in-Charge.

Almirah large 1/2 H-1/2 S /Cadet steel (FD/E6/MAP/18, WDF 49/07, WDF 116)

Almirah large Steel with shelves/glazed (FD 104 M ,67 FD 114, FD 1031, 351)

Almirah Steel Med with shelves, 1/2 H 1/2 S (FD 104 M, 243, 67 FD 1032,243,350, FD 114M)

Bed Hard ply top steel (FD E6 MAP/08 (R) )

Book Case Steel / Book Shelf open steel all type (FD 104 FD 90M FD-1028 FD 356 FD 69M, DB-4121)

Chair CB Steel with Arms (FD 75M)

Chair CB Steel without Arms (FD 75M )

Chair writing steel (MAP) /Chair visitors ( FD/E6/MAP/12)

Chair School with hand board Chair desklet (FD/E6/MAP/12 TP)

Charpoy IP Hard Top (FD/E6/MAP-II/01)

Charpoy IP folding with ply top (FD-388)

Chair Verandah (FD-256, 359)

Locker Bed side Steel (FD 1029)

Rack shoe steel {FD/E6/MAO/02 (R)}

Rack Side steel three space /four space (FD 1023,97)

Rack Stationary steel (FD 81)

Stool steel 305x305x510mm/760mm (FD 81 )

Table Office Offr Steel (FD 84 M, 1003, 1002, )

Table Office Clerk Steel (FD 84 (M) 1004,1084,381)

Tepoy Varandah (FD 35,255, 383, FD E6 /MAP/17)

Table 3 x 3 steel (FD-1009)

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

Mahesh Traders