47 of 2024-25

Amount

Clearing compound premises of shurbs, plants, junglesetc. By cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared)

Uprooting and removing plants fromthe surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). © Large plant of girth of exposed stem above150mm. But not exceeding 225 mm. lift upto 6 mtr.

Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Math or labour &removing the same to any distance

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Hire and labour charges for shuttering with centering and necessary staging up to 4m using approved stout prop sand thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion ofworks (up to roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor toilet block

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile above 0.09 Sq.m (ii) Other than Coloured decorative including white

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass.

Plaster (to wall , floor, ceiling etc.) with sand and cement mortar including rounding of for chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary (Ground floor). [Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Supplying fitting and fixing 600 mm (±30mm) diametre R.B.T (Reinforced Barbed Tape)Concertina fencing on wall top using concertina coils stretched to approx. 6 meter slength at site clipped with two nos. o fhorizontal R.B.T strands which will be tensioned and fixedwith the verticalM.S angle iron posts bymeans of security fasteners (such as 'C' clips, R.B.T clips etc.)

Fixing post of iron or precast concrete by digging hole in the ground (in all sorts of soil ) and embedding the same by packing the hole with cement concrete (1:3:6) (with jhama khoa. For Purulia, Bankura and Darjeeling Hill by Pakur Variety, Local Black Hard Stone & Bazree respectively) and finishing the top surface to regular shape (as directed) with 15 cm cement plaster (1:6) complete, including the cost of concrete, plaster etc. but excluding the cost of the post : (i) Average dia. of the hole 200 mm. to 300 mm. (a) Depth 450 mm. to 500 mm. [Cement 8 kg/No.]

M.S. works in brackets made from flats, angles, tees etc. to sizesspecialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm)

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC a) One Coats

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (iii) Two coats.

Supply and Installation of Kitchen Chimney [Model No. Hindware Raylene; SAP Code 523858, (90 cm)] at Hostels along with necessary electrical Connections.

Supply and Installation of Single Commercial Gas Oven (Big Size) including Regulator and Gas Pipe along with delivery of the same to the respective hostels

Supply & installation of LG UR75 139 cm (55) 4K UHD Smart TV | WebOS 23 | HDR10 Pro LED TV

Supply & installation of Almirah (36" x 18" 72") Item Code SAL-767

Supply & installation of Plastic Chair without Handle Item Code FRW-86

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

(c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand).

(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).

g) PTMT overhead shower ( Prayag or equivalent) (ii) 150 mm round

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (e) For depth upto 150 metre for 80 mm dia. tube well wuth top enlargement of 150 mm dia. (i) 80 mm dia. boring etc.

(ii) 150 mm dia. boring etc. top enlargement

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (iii) 80 mm dia.

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (iii) 75 mm dia.

Supplying, fitting and fixing PVC pipes for underground work of approvedmakeof Schedule 80 (medium duty) conforming to ASTMD 1785 and threaded to match with GI Pipes as per IS:1239 (Part-I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials , jointing materials, cutting pipes, making threads,cutting trenches upto 1.5 metre below surface in all sorts i) 150 mm ofsoilandrefillingthesameasdirectedcompleteinallrespect.(Payment will bemade on the centre linemeasurement of the total pipe line includingallspecialsNoseparatepaymentwillbemadeforaccessories, specials.) (A) PVC Pipes (Dia)

iii) 40 mm (For Distribution works)

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (L) Reducing Socket (mm X mm) 150 X 80

(J) Threaded End Cap 150 mm

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.

Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.

Plumbing & Sanitary

ATRAYEE CO-OPERATIVE LABOUR CONTRACT AND CONSTRUCTION SOCIETY LTD. (BID ID -6299406)

MASCOT CO - OPERATIVE LABOUR CONTRACT AND CONSTRUCTION SOC. LTD (BID ID -6299515)