Prov improved access w/s scheme Lambi

Dismantling brick work tile, masonry or tile lining ((b)) In cement

Dismantling concrete Lime concrete, cement concrete of 1:6:12 or leaner mix

Removing doors and windows together with the dismantling of walls (i) Doors

(ii) Windows

(iii) Clerestory windows

Scraping (c) Cement plaster

CENTRING AND SHUTTERING Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

CONCRETE Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cement concrete 1:4:8 with stone ballast 20mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type

BRICK WORK First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

PLASTERING & POINTING Plastering on underside of ceiling 10mm

12.5 mm thick cement plaster 1:4

20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded ((a)) Vertical

12.5 mm thick cement plaster 1:4

LOADING AND UNLOADING By Manual Means Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal.

FLOORING & DADOS Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Providing & fixing glass strips 4mm thick in floors (a) 50 mm wide

40mm thick grey polished flooring cement concrete 1:2:4 toping finished with 3 mm thick neat coat of cement rubbed and polished using mechanical mixer for mixing of material

EARTH WORK Extra For compensation & royalty for Ordinary earth/ Ordinary clay taken from private land.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

STEEL AND IRON WORK Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. (a) Doors and windows frame of size 118mm x 60mm with 40mm wide single rebate weighing 3.43 kg per meter.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

WOOD WORK Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. (a) panelled, glazed or glazed and panelled. (ii) 35 mm thick

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) (a) 30 mm thick

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (A) 300mm x 16mm

WHITE WASHING, DISTEMPERING, PAINTING & POLISHING Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

White washing (two or more coat)

Distempering with dry distemper of approved manufacture two or more coats on old distempetered surface when shade is changed

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

COMMON SCHEDULE OF RATES RECESSED HDPE PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts grade to be laid in HDPE electrical conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (i) b) Wiring fan point (With fan box)

(ii)) Wiring light point

SHEET METAL IRON CLAD SWITCHES: Supply and erection of sheet metal Iron Clad Switches on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications:- (xi) PORCELAIN FUSE UNITS: Supply and erection of Porcelain Fuse Unit with Extension Strip on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General (a) Porcelain Fuse Unit 16Amp., 240volts

Providing & Fixing ISI marked electric fan & regulator etc complete in all respect as per approval of Engineer in-charge).

Providing & fixing ISI marked CFL Bulb 25 w complete in all respect.

Providing & fixing rain water pipe complete in all respect.

CARRIAGE((i)) Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. Jallalabad Sand

Pathankot Sand+ Bajri

Tibba Sand (Lead 5 Km)

HOISTING, ROOFING AND WATER PROOFING Providing and fixing asbestos cement rain water pipe 100mm dia with M.S. holder and clamps fixed on

Providing and fixing asbestos shoe for asbestos cement rain water pipe in position.

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall face including

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- (a) Top Layer:Top layer:----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00to3.00) from Pathankot or other approved source.

Taking out filter Media (Top layer) Washing, Screening & Placing the same in CTP complete in all respect.

Carriage of Material Top Layer lead Pathankot (300 Km)

Converting Lift

Taking out filter Media (2nd to 5th layer) and replacing the same after washing screening CTP complete in all respect.

Washing the Filter beds complete in all respect. Taking out and ne hoisting RCC plates after

Washing the flase floor slabs complete in all respect.

Hoisting R.C.C. bed plates and placing in position

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (v) 160mm o/d pipe of 10 Kgf. / sqcm

Contraction of Plinth Protection around the OHSR 125 Cum Capacity complete in all respect.(As per Drawing Attached)

Construction of brick Masonary Boundary wall 1.75 Mtr Height complete in all respect. (As per Drawing Attached)

CONSTRUCTION OF 3.00 METRE WIDE FOOT PATHS WITH CEMENT CONCRETE INTERLOCKING PAVER BLOCK IN SIDE WATER WORKS COMPLETE IN ALL RESPECT.(As per Drawing Attached)

Providing & Fixing floating arm in position complete with sluice valve long spindle band wheel brackets and guides complete in all respects. 150 mm i/d 2.00 Mtr long of engineer-in charge.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (A) Class PN-1 as per ISI (a) 80mm i/d Sluice Valves flanged

(b) 100mm i/d Sluice Valves flanged

(c) 150mm i/d Sluice Valves flanged

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (b) Size 0.9 m. x 0.9 m.

Providing & Fixing floating arm in position complete with sluice valve long spindle band wheel brackets and guides complete in all respects. 150 mm i/d 2.00 Mtr long of engineer-in charge.

Improvement of Leakage of Pipe lines including material & labour Complete in all respect as per approval of Engineer-in Charge 90mm o/d

Improvement of Leakage of Pipe lines including material & labour Complete in all respect. as per approval of Engineer-in Charge 110mm o/d

Improvement of Leakage of Pipe lines including material & labour Complete in all respect. as per approval of Engineer-in Charge 160mm o/d

Improvement of Leakage of Pipe lines including material & labour Complete in all respect. as per approval of Engineer-in Charge 250mm o/d

Providing household connection with laying,jointing,fixing testing GI pipes B-Class (Jindal Make) (as approved by Engineer-in-charge),including cost of Excavation,Refilling 15 mm o/d GI pipe B-Class (Jindal Make) 4.50m(length on average basis).3"i/d PVC clamp,G.M ferrule ISI Marked, connection of 15mm i/d ferrule medium .Specials such as tees,bends,sockets, elbows , nipples(100 mm & 150 mm),Union Couplings,GI hooks etc.and gun metal peet valve (heavy pattern)with hand wheels on GI pipe B-Class (Jindal Make) Lines laid in the ground or inside buildings Cutting,Threading,Making hole in wall and testing in trenches in the ground All material Should be of approved make (to the approval of Engineer-in-charge) Complete job in all respect including cost of carriage. (Refer CSR item nos. 28.1,28.34b,,30.65,)