Prdg street light electrical works at TE Yeshwanthapura, Bengaluru

Amount

Supplying and Laying of the 2core 4Sqmm "ISI" marked PVC insulated / XLPE Aluminium conductor UG Cable of 1.1 KV grade on surface of wall / pole / in ground i/c necessary testing & commissioning etc., complete as reqd., [M/s Polycab / SS / BSNL approved make)

Supplying and laying 40 mm dia. HDPE pipe for on surface of wall with clamps and painting the same etc., as required.(Make: M/s Ashirwad / Supreme or Any ISI marked)

Supplying and making end termination with brass compression gland suitable for 2C X 4 Sqmm PVC sheathed / XLPE al. UG Cable of 1.1 KV grade and al. lugs etc., complete as required.

Supplying and fixing of 32 mm dia 5ft B class GI pipe bracket suitable for fixing the existing LED street light fitting on surface of wall / existing pole with necessary clamps, accessories etc., complete as reqd.

Cutting the existing cement concrete digging by using compressor hammer drill / manual digging, cleaning the debris etc., and refilling of the same in the proportion of 1:3:6 RCC concrete (Approx size 0.15Mtrs x 0.20Mtr), neat finishing, making good the damages etc., complete as reqd.

SITC of 30Watt LED type Street light fitting suitable for operation on 230V, 50Hz, AC supply on surface of wall / on the existing GI pipe bracket / pole i/c making necessary interconnections, testing / commissioning etc complete as reqd. [Make: M/s Havells, Model : LHEXAYP7PN6K030 / SS BSNL approved make]

Supplying and fixing Weather proof / shock proof SMC box of size 150mm x 150mm x 100 mm with No. 1 No. 16A porcellain fuse cut out & 16A, 4 way connector block suitable size clamps to mount on the wall / existing compound light poles i/c necessary inter connections, testing, commissioning etc., complete as reqd. [Make: M/s Syntex, or superior make]

Supplying and fixing of 4ft 20 W (4000 Lumin) LED Tube Light Fitting with electronic driver suitable for working on 230V 50Hz AC supply directly on ceiling/wall, including Dismantling of old fulty tube light fitting connection Testing etc as reqd., [Make: M/s Crompton CCS-102-20-65-SL-DP-NWH or BSNL approved make]

Supplying and Laying of following sizes BTC aluminum cable in existing surface/ recessed steel conduit/PVC conduit/Trunk box/panel including connections etc as reqd. a) 3 core 2.5 Sqmm Aluminium BTC cable

b) 3 core 4 Sqmm Aluminium BTC cable

Supplying and fixing of 25mm dia PVC pipe along with accessories on surface of wall etc., complete as reqd.

Supplying and Fixing of 2HP open well/sump submersible monoblock centrifugal pumpset coupled with 2HP motor suitable to operate on 1Phase 230 V 50Hz AC supply for lifting water from sump to overhead tank, arranging for clearing of sump, commissioning of pump including cc slab cutting for delivery line holes, etc as reqd (M/s KSB-Mono sub-MR(S)2.0 or SS make).

Supplying and Fixing submersible pump controller with built-in DOL starter with relay range 13-22 A, 0-500 V AC Voltmeter and 0-30 A AC Ammeter in factory made MS enclosure including fixing the controller in existing enclosure, connections with existing wires, testing and commissioning etc as required (M/s L&T MR G2 or similar superior make)

Supplying & fixing of following CPVC / Brass accessories suitable for 2 HP Submersible type Monoblock Centrifugal Pumpset i/c necessary hardware items, testing, commissioning etc. as reqd. a) 40mm CPVC Pipe

b) 40mm CPVC MT (1side thread other side coupling)

c) 40mm CPVC Union

d) 40mm CPVC Bend

e) 40mm CPVC 'T'

f) 40mm Brass Non Return Valve

g) 40mm Brass Gate Valve

S&D of 3Core 4 Sqmm Flat FRLS PVC insulated copper conductor single core cable in existing surface/ recessed steel conduit/PVC conduit/Trunk box/panel including connections etc as reqd.(Only ISI marked cable shall be used)

Temporary arrangement of suitable pump for lifting water from existing sump to over head tank in terrace i/c necessary connection, up to new pump commissioning etc., required.

Dismantling of existing MS Pump shed approx. Size 1.1 Mtr (H) x 0.90 Mtr (W) x 0.95 Mtr (L) using cutting Machine, Man power and existing faulty 1 no. pump (Cauvery Water Pump), all suction & delivery & priming arrangement such as GI pipe, GI bend, GI union, Gate valve, Non-return valve etc., cutting the concrete plinth i/c good the damages, finishing with cement plastering & removing debris from site etc., as required.

Dismantling of existing faulty 2 nos. 3HP 3phase Monoblock unserviceable pump in Pump House i/c all suction (50mm) & delivery (40mm) & priming arrangement such as GI pipe, GI bend, GI union, Gate valve, Non-return valve etc., complete as required.

SRI DHANALAKSHMI ELECTRICAL STORES