Repair and Maintenance of Infrastructure Assets in CP Division during 2025-26. Sh Hiring of Truck mounted water pressure jet machine for Cleaning of footpath roads and paved area under C.P. Division

Providing and installing prefabricated sandwich PUF Panel comprising of on two faces PPGL (galvalume) colour coated 0.5mm TCT sheet and CFC free close cell, high density rigid polyurethane foam of high density (40 ± 2 kg/m3) having a thermal conductivity value of 0.023 w/mk and of required thickness sandwiched between the two galvalume sheets. The outer & inner galvalume sheet of 0.50mm TCT steel 550 Mpa shall have a coating mass of 150 g/sqm zinc aluminium alloy coating total of both sides as per AS-1397 and finished with 20 microns colour coating of SMP polyester quality paint as per AS/NZS-2728:1997 (Category-3) over a 5 micron primer on exposed side and a back coat of 5 microns on inner side over a 5 micron primer. The panels should be of required length and required width with maximum width up to 1190mm with tongue & groove configuration. The prefabricated panels shall be fixed directly to the girth using self drilling fasteners. The metal sheet shall confirm to IS: 513.AS-1397&2728. The polyurethane insulation shall confirm to IS: 12436. The rate include cost of flashing/ridges/ corner pieces/ hips etc. made of 0.5 mm TCT PPGL (Galvalume) steel sheet in required shape and size including all accessories required to complete the work . The rate of the item is inclusive of all materials, likes base channel of required size and shape for seating of wall panels on floor /walls, erection accessories, incidental charges, cost of dash fasteners etc, cost of making provision for doors, windows , ventilators, and concealed pipes, conduits and support for electrical and sanitary appliances etc and other incidental charges as per sample including additional flat /sheet of required size, shape and thickness for fixing door/window/ventilator frame complete as per manufacturer’s specification and direction of Engineer-In-Charge For payment, finished PUF sandwitch panels shall be measured upto half centimeters for calculating area upto two places of decimal. No deduction shall be made for openings upto 0.20 sqm and no extra payment shall be made for wastages etc. (a) For Wall panels with 80mm thick wall panels finished with 0.50mm thick TCT Galvalume Plain sheet with small ribs on both sides with Camlock arrangement complete including miscellaneous expanses of fixing accessories such as wall corners, dash fasteners, base channels, nuts and bolts and making arrangement for concealed water supply pipes ,sanitary fittings, electrical appliances and conduits etc. as per direction of Engineer-in-Charge..

(b) For Roof panels with 50 (50/80) mm thick Roofing panels having finished with 0.50mm thick TCT Galvalume Hi-Rib sheet on outer side and 0.50 mm TCT Plain Galvalume sheet on inner side including miscellaneous expanses of fixing accessories such as dash fasteners and making arrangement for concealed conduits etc.

Supply and fixing 50 mm thick powder coated Aluminium window with two track glass sliding window with provision of locking arrangement at both end and fixed security powder coated aluminum grill and stainless steel mosquito wiremesh fixed in the aluminium frame with colour of RAL-9002 fixed in between puff panel, complete as per direction of Engineer-in-charge.

Supply and Fixing of 40mm thick puff Inslulated single leaf Door be madeout PPGI (Pre painted Galvanised Iron Profiled Sheet (0.5mm) at top and PPGI (Pre painted Galvanised Iron) Rib Sheet (0.5mm) at bottom with Colour of RAL-9002 in side in between Puf panels.complete as per direction of Engineer-in-charge.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. Ridges plain (500 - 600mm).

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group-C.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed /steel conduit as required. (a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

(c) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 2 + 8 way, Double door.

Supply of ceiling fans (1400mm sweep) aluminum body, double ball bearing, heavy duty, white color, high speed, along with resistant type regulator (Cona/ vogue/ Havell’s/ Usha/ Orient PSPO new bridge or equivalent

Providing and fixing 20 watt LED Tube lite including all fiting and fixture ( Philips , surya, bajaj syska ) or equilanet and as per direction and satisfaction of engineer in charge.

Dismantling old/damaged Porta Cabin of Panel walls & roof of thickness 50-75mm in unusable condtion. The size of porta cabin is (5.0-7.50)x(4.0-5.50) metre of average height 3.10 metre. The rate includes all costs of dismantling, clearing the site by taking away all the dismantlled material and remove all the debris complete. Any kind of transportation and labour involved in this will not be paid separately. The rates are for one complete job on as and where basis and work will be done as per entire satisfaction of Engineer-in-charge.

Supplying and fixing of fancy Benches made of flora cast iron having back height of minimum 700 mm and minimum seating height of 375 mm. MS tube of 65x25 mm 5 nos. with extra seat support of 25x5 mm MS flats for extra stability. Backrest will be made of 5.0 mm MS sheet with laser cutting and tube support. Complete materials will be painted and nut bolted properly. The length of bench will be 1500 mm and approved by Engineer-in-charge. Weight approx. 75 kg. or as per approved by Engineer-in-Charge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).