WBPHED/EE/07_04/BOLMD/25-26

Amount

Supply, delivery at site the following submersible pumping machinery as follows :- Submersible Pumping Machinery directly coupled with water proof suitable size motor having following specification. Pump : Duty condition : 18 m3/hr, Head : 54Mtrs. Shaft : Stainless Steel, Impeller : Cr. Steel, Outlet Size : 80 mm/65mm, Motor : Submersible type : 3Ph, 50Hz, 400V + 10%, 2900 RPM Motor must be suitable for operation with DOL starter, energy efficient. (Make: KSB / Pluga / approved make). (TC, GC & Curve Chart to be submitted at the time of delivery)

Supply delivery at site of 4 sqmm 3 core 1.1 KV Grade flat submersible copper conductor cable . (Make:- Finolex / Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

Supply & delivery at site of following size Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

10 mm² x 3 core

25 mm² x 4 core

Supply & delivery of 100A Kit-kat Rewireable (Porcelain Fuse carrier & Base) (Make:- Havells / L&T / or any Approved Vendor list of PHED.)

Supply & delivery of 100 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3). (Make: Approved Vendor list of PHED.)

Supply & delivery of Re-wireable type TPN Changeover switch 100 Amps 415V, 50Hz, 4 Pole offload with steel sheet enclosure (Conforms: IS/IEC60947-1&3). (Make: Approved Vendor list of PHED.)

100 Amps, 4way, wall mounted Copper Busbar Chamber with steel sheet enclosure (Conforms:IS/IEC:60947-3). (Make: Approved Vendor list of PHED.)

Supply and delivery of the following valves, pipes and gauges etc at site-- (Make: Approved Vendor list of PHED.)

3mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

80mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for wash out line. (MOC & TC needed for valve).

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312) (MOC & TC needed for valve).

CIDF 90°bend- 1no., CI flanged tee- 1no., blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1mtr.- 1 no. etc (as per IS specification and certification registered) for construction of delivery pipe line and wash out line.

Heavy type 250mm dia./suitable Split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design.

Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Suuply and Delivery of following items for high lift pumping machineries.

Supply & delivery at store of Harizantal type Openwell Submersible pumping machinery as per follwing specification:- Pump: Discharge : 30m3/hr , Head : 60 Mtr, Impeller : CI ,Motor Body : Cast Iron, Delivery: 65/80mm, Casing : Cast Iron, Shaft : Stainless Steel, Motor: Methode of Starting : SD , Supply Voltage : 3 Phase , 415 V( ±10%) , 50Hz(±5%), (Curve chart will be submitted before the delivery).(Make: Kirlosker/KSB/Approved make of P.H.E.Dte.)

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for delivery pipe line and wash out line.(MOC & TC needed for valve).

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312).(MOC & TC needed for valve).

Supply, delivery at site and storage of MS dismantling joint suitable for PN 1.0 rating for the following sizes for Individual Delivery of High Lift Clear Water Pump sets. Nominal dia-80 mm

Supply, delivery of Medium B class GI Pipes of DN 80( conforming to IS 1239 part-I 2004) and supplied dismantling joint for delivery and common header lines on delivery side (suitable for PN 1.0 rating )including necessary Flanges, Bends, Tees, nuts and bolts gaskets, reducers,enlarger etc. as required to make the delivery line complete for the two number mono block pump.

150mm dial Pressure gauge [Range 0-7kg/cm²] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm. dia G.I. pipes and specials].

Fitting & fixing of starter along with main switch, busbar etc. all electrical equipment within the pump house, drawing of cable properly on suitable size GI cable tray on wall / as per direction of EIC as per layout & IE rules and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fixing of materials as per direction of EIC & testing complete.

Supply & Making necessary GI Medium pipe (dia of pipe not less than 32mm) protection for submersible cable from kiox box to submersible pump-motor set including supply of all specials and complete the job.

Installation of of above supplied openwell pumping machinery ,main switch,busbar, changeover,satrter at along with above supplied GI column pipes (as required),dismantling joint top cover, valves, and specials ,cable protection pipe and clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near CWR . including cutting hole on top of CWR and PCC base for pumps and supply & laying of cable protection pipe as required and all to complete the job including painting of whole installation as per direction of EIC.

Making earthing arrangement as per following --

Excavation of soil for installation of Earth electrode and filling and ramming for soft soil.

Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long with TATA-Medium GI pipe with a provision to connect 25mm X 6mm GI flat strip complete with GI bolts, nuts, washers etc as required.

Supplying & fixing of earth Busbar of galvanized (Hot dip) MS flat 25mm X 6mm on wall having clearance of 6mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulator etc as required.

Connecting the equipments body to earth busbar including S&F 20mm X 3mm galvanized (Hot dip) MS flat on wall/floor with GI saddles as required and connection of equipments incld. drilling holes, with bolts, nuts, washers etc as required.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36cm X 86.36cm X 46cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width duly plaster with cement morter (inside) CI hinged inspection cover of size 36.56cm X 35.56cm with locking arrangement, GI reducer including drilling of 46nos. 12mm dia holes on the GI pipe.

Extra treatment of soil by using salt and charcoal or coke for plate electrode.

Laying of one No. cable up to 35 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Making brick pillar 0.25 x 0.25 x 0.75 Mtr/Suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete. (Both Pipe line)

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC.

Installation and commissioning of above supplied Chlorinator with all accessories, PVC tank and drawling of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stonechips] and neat cement finish by supplying of all required materials and testing the entire set as per direction of EIC. [Power will be feed from PLC panel of pumping machinery].

Making internal electrification of pump house consisting of 1no. Ceiling fan point, 2nos. tube light & 2nos. LED bulb point, 1no. bulk head point and 4nos. 40W LED with arm bracket at outside and one three pin plug point incld. supply of all necessary materials (approved make Ceiling fan, Lamps & fixture etc.) to complete the work as per IE rules, wiring with 2.5 sqmm / suitable gauge copper wire within PVC casing, PVC switch board etc as per direction. [N.B: (1) Pump data is to be confirmed with the yeild test report of the tube well. (2) Third party inspection of the work is mandatory as per guidelines of NJJM and direction of EIC without any extra cost. (3) Drawing, design and make of the materials are to be approved from the EIC before procurement.]

Add: GST @ 18% on sum of Item No: 1.00 to 21.00

Add: Cess @1% on sum of Item No. 1.00 to 22.00

SINHA ELECTRICALS (BID ID -6462612)

M S ENTERPRISE (BID ID -6438691)

WEST BENGAL ENGINEERING CO. (BID ID -6477826)