Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.6 LAccepted-AOC 24 SHANTI BHAWAN DHARI ROAD BELTARI PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | UTTARAKHAND | 262520 | ₹22.6 L Quoted ₹24.4 L | L1 | Accepted-AOC Being L1 Bidder |
| 2 | L2₹25.9 L+₹1.5 L (6.12%)Rejected-Finance R O H NO 55 SEC D BHARAT NAGAR TALAB TILLO JAMMU 180002 | JAMMU | JAMMU AND KASHMIR | 180002 | ₹25.9 L+₹1.5 L (6.12%) | L2 | Rejected-Finance Not Being L1 Bidder |
| 3 | L3₹26.1 L+₹1.7 L (6.88%)Rejected-Finance | ₹26.1 L+₹1.7 L (6.88%) | L3 | Rejected-Finance Not Being L1 Bidder |
| 4 | L4₹29.7 L+₹5.2 L (21.5%)Rejected-Finance PANTHAL KATRA REASI J K 182320 | REASI | JAMMU AND KASHMIR | 182320 | ₹29.7 L+₹5.2 L (21.5%) | L4 | Rejected-Finance Not Being L1 Bidder |
| Sl No | Description | Qty | Unit | DEV RAJ MAGOTRA L4 | m/s shanti trading company L1 | M/S Chib Engineers L2 | ARNABH ASSOCIATES L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking up/down carefully ceiling fans 1200/1400 mm sweep and exhaust fan/pedestal/air circulator Fan/ wall mounted fan any size, any sweep, from various bldgs (Or collecting from MES E/M Store Yard) as directed, opening up for servicing/repairaing , removing dust and dirt ,cleaning fan motor with cotton/waste malmal, washing blades with detergent powder, servicing/Oiling , Lathe work if any required and greasing of fan of any size/type by using approprite grade of oil/grease and Replacing defective parts such as armature, conopy, Fan blade, Ball bearing, Fan down rod, shutter/louvers , MS shaft, bush, bearing split pin, rubber bush , holding clamp, capacitor ,MS clamps, rubber packing, split pins rubber reel etc, for the smooth and satisfactory functioning, and reassembling complete, re-fixing ceiling fan /exhaust fan with proper PVC flexible pipe 20 mm dia, in same position ( or deposited to MES Store Yard ) , connecting to copper flexible cable 40/.0076 size to electrical system and including proper testing & Refixing after said work complete all as specified and directed by Engr-in-Charge. | 3,120 | Job | 5 ₹15,600 | 2 ₹6,240 Lowest | 10 ₹31,200 | 20 ₹62,400 |
| 1.01Note for item No 01 :- (a) Replacement of unserviceable parts shall be measured and paid for separately under respective items as S & F in repair. (b) On testing after completion of repair,if the proper speed/smootheness is not obtained at engr-in- charge satisfactory level , the repairing will be re- done by the contractor at his own costs and the same shall be deemed to be included in the quoted rates. (c) The contractor shall maintain/open a Workshop and keep his electrician ready during working Hrs ( 0900 Hrs to 1700 Hrs ) for repair/rewinding pupose, inside MES store Yard so that all the repairing/ rewinding of Fans will be done in proper manner, MES authorities will not be issued any Fans,any type, for repair/rewinding puropse to the contractor for outside workshop. | |||||||
| 2.00 | Rewinding & spray Painting (painting with two cot synthetic asian paints) of AC ceiling fan motor 240 volt, 50 Hz, 1200 mm sweep of any make with super enameled copper winding wire of existing size including sleeve work, varnishing with ‘B’ class insulation varnish, connection with flexible copper wire 0.472mm dia upto connector block, complete all as specified and directed. (Motor shall be wound with machine with same No of turns as per existing.) | 2,000 | Each | 400 ₹8,00,000 | 250 ₹5,00,000 Lowest | 300 ₹6,00,000 | 370 ₹7,40,000 |
| 3.00 | All as per srl item no 2 here-in before but Ceiling Fans of 1400 mm sweep complete all as specified and as directed. | 500 | Each | 410 ₹2,05,000 | 250 ₹1,25,000 Lowest | 340 ₹1,70,000 | 370 ₹1,85,000 |
| 4.00 | Rewinding & spray Painting (painting with two coat synthetic asian paints) of exhaust fan motor 240 volt, 50 Hz, 300/380 mm sweep of any make with super enameled copper winding wire of existing size including sleeve work, varnishing with ‘B’ class insulation varnish, connection with flexible copper wire 40/.0076mm dia upto connector block complete all as specified and directed. (Motor shall be wound with machine with same No of turns as per existing.) | 500 | Each | 370 ₹1,85,000 | 300 ₹1,50,000 Lowest | 300 ₹1,50,000 Lowest | 400 ₹2,00,000 |
| 5.00 | All as per srl item no 4 here-in before but exhaust fans/ wall mounting fan of 450 mm sweep complete all as specified and as directed. | 120 | Each | 500 ₹60,000 | 400 ₹48,000 Lowest | 500 ₹60,000 | 450 ₹54,000 |
| 6.00 | S & F in repair Capacitor AC 415 volts 2.5 mfd 50 HZ complete all as specified and as directed. Make: Havells/Kinjal/Matrix | 1,500 | Each | 34 ₹51,000 | 25 ₹37,500 Lowest | 30 ₹45,000 | 30 ₹45,000 |
| 7.00 | All as per srl item No 6 here-in-before but 3.15 to mfd complete all as specified and as directed. Make: Havells/Kinjal/Matrix | 1,050 | Each | 38 ₹39,900 | 20 ₹21,000 Lowest | 35 ₹36,750 | 30 ₹31,500 |
| 8.00 | S & F in repair for exhaust fan MS shaft for 300 mm to 450 mm size complete all as specified and as directed. | 450 | Each | 20 ₹9,000 Lowest | 30 ₹13,500 | 20 ₹9,000 Lowest | 50 ₹22,500 |
| 9.00 | S & F in repair of ball bearing suitable for ceiling fan for 1200 mm sweep complete all as specified and as directed. Make SKF/NBC | 1,600 | Each | 30 ₹48,000 Lowest | 30 ₹48,000 Lowest | 40 ₹64,000 | 60 ₹96,000 |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
8 Jun 2026, 6:00 pmClosed
GE SOUTH UDHAMPUR
GE SOUTH UDHAMPUR
REPAIR MAINTENANCE OF CERTAIN PART OF CEILING FAN EXHAUST FAN CABIN WALL FAN AND ALLIED WORKS UNDER GE SOUTH UDHAMPUR
2026_MES_766085_1
GE/S(U)- 45/2026-27
Open Tender
Civil Works
Works
270 days
GE SOUTH UDHAMPUR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE SOUTH UDHAMPUR
₹54,000
14 Jul 2026
18 May 2026
9 Jun 2026
18 May 2026
8 Jun 2026
1 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking up/down carefully ceiling fans 1200/1400 mm sweep and exhaust fan/pedestal/air circulator Fan/ wall mounted fan any size, any sweep, from various bldgs (Or collecting from MES E/M Store Yard) as directed, opening up for servicing/repairaing , removing dust and dirt ,cleaning fan motor with cotton/waste malmal, washing blades with detergent powder, servicing/Oiling , Lathe work if any required and greasing of fan of any size/type by using approprite grade of oil/grease and Replacing defective parts such as armature, conopy, Fan blade, Ball bearing, Fan down rod, shutter/louvers , MS shaft, bush, bearing split pin, rubber bush , holding clamp, capacitor ,MS clamps, rubber packing, split pins rubber reel etc, for the smooth and satisfactory functioning, and reassembling complete, re-fixing ceiling fan /exhaust fan with proper PVC flexible pipe 20 mm dia, in same position ( or deposited to MES Store Yard ) , connecting to copper flexible cable 40/.0076 size to electrical system and including proper testing & Refixing after said work complete all as specified and directed by Engr-in-Charge. | 3,120 | Job | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.86 MB
BOQ_857975.xls
BOQ • 0.44 MB
TENDER45.pdf
Tender Documents • 0.85 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .