Setting up of Biomolecular Condensate Laboratory at TIFR, Colaba, Mumbai 400 005

WALL TYPE TABLE WITH TWO TIER REAGENT RACKS HAVING OVER ALL SIZE :- 1500MML X 750MMD X 900MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- i)Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. ii) C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 2 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts iii)Modular type vertical slide able Two tier shelf Reagent Racks with electrical switches and sockets The above wall type table shall be provided with 'Modular type vertical slideable Two tier shelf Reagent Racks having raised edges in Aluminium Extrusion T6063 grade construction only with 6mm thick wired glass/ compact laminate. Overall Size: Respective Length 1500mmL of the Table x 300mmW (overall) with T6063 grade heavy duty aluminium single piece pressure die casted (PDC) shelf brackets min. 180mm x 50mm section total QTY:- 4 sets per table for reagent racks shelfs. The above shelfs equivalent to the wall tables length of 1500mmL which shall be mounted on Qty:- 2 Nos of verticals Single/Double 2 mm THK GI size:- 150mm x 25mm thk. X 2200mmH, Verticals per table length as required. The height placements of are as indicated in the enclosed reference images. However,1 no.of the bottom shelf on the working side shall be provided with a 4 ft long 18watts LED tube light with a switch and its respective on, off switch with its internal wiring. tube light of minimum about 18 Watts each. GI construction Mini Vertical Service channel connector QTY: - 1No. GI powder coated Removable panel shall also be provided. For the racks both working side electrical panels shall be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) Qty:-2 sets per table These switches shall be fixed on the front panel of the reagent racks working side. The electrical switch sockets which shall be fixed on the working sides of the table on the height adjustable service panel mounted between the verticals and below the reagent racks having the entire interior length of Single/ Double Verticals.

WALL TABLE WITH TWO TIER REAGENT RACKS HAVING OVER ALL SIZE :- 1312MML X 750MMD X 900MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- i)Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set. ii)'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 2 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts iii)'CC1' Type Storage Module / Cabinet The ‘CC1’ type under bench storage cabinets shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The horizontally sliding type in the table length Under Bench Storage Cabinet shall be each having Size:- 600mmL x 500mmD x Approx.: 660mmH, Having One drawer, Two doors, & One Adjustable/ Removable Shelf with positive locking and having post formed rounded vertical side edges QTY-2 Nos per table. The under bench cabinets shall be provide with aluminium PDC handles min. 320mm. Length duly epoxy coated. The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. However the drawers shall be provided with heavy duty telescopic slides having at least load carrying capacity of 45 kg’s. Per drawer iv) Modular type vertical slide able Two tier shelf Reagent Racks with electrical switches and sockets The above wall type table shall be provided with 'Modular type vertical slideable Two tier shelf Reagent Racks having raised edges in Aluminium Extrusion T6063 grade construction only with 6mm thick wired glass/ compact laminate. Overall Size: Respective Length 1312mmL of the Table x 300mmW (overall) with T6063 grade heavy duty aluminium single piece pressure die casted (PDC) shelf brackets min. 180mm x 50mm section total QTY:- 4 sets per table for reagent racks shelfs. The above shelfs equivalent to the wall tables length of 1312mmL which shall be mounted on Qty:- 2 Nos of verticals Single/Double 2 mm THK GI size:- 150mm x 25mm thk. X 2200mmH, Verticals per table length as required. The height placements of are as indicated in the enclosed reference images. GI construction Mini Vertical Service channel connector QTY: - 1No. GI powder coated Removable panel shall also be provided. For the racks both working side electrical panels shall be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) Qty:-2 sets per table These switches shall be fixed on the front panel of the reagent racks working side. The electrical switch sockets which shall be fixed on the working sides of the table on the height adjustable service panel mounted between the verticals and below the reagent racks having the entire interior length of Single/ Double Verticals.

WALL TYPE TABLE WITHOUT REAGENT RACK HAVING OVER ALL SIZE :- 2000MML X 680MMD X 900MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- i)Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set. ii)'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 4 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts. iii)'CC1' Type Storage Module / Cabinet The ‘CC1’ type under bench storage cabinets shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The horizontally sliding type in the table length Under Bench Storage Cabinet shall be each having Size:- 600mmL x 500mmD x Approx.: 660mmH, Having One drawer, Two doors, & One Adjustable/ Removable Shelf with positive locking and having post formed rounded vertical side edges QTY-2 Nos per table. The under bench cabinets shall be provide with aluminium PDC handles min. 320mm. Length duly epoxy coated. The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. However the drawers shall be provided with heavy duty telescopic slides having at least load carrying capacity of 45 kg’s. Per drawer iv) Raceway with Switch and respective Socket: ‐ The above table shall also be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) These switches shall be fixed on the Table mounted electrical MS powder coated separate raceways on the working sides of the tables of Approx. 150 mm H having its length equivalent to the table tops length ie. 2000mmL QTY:- 3 sets per table

ISLAND TYPE TABLE WITH TWO TIER REAGENT RACKS HAVING OVER ALL SIZE :- 1500MML X 1500MMD X 900MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- i)Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set. ii)'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 2 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts iii)'CC' Type Storage Module / Cabinet The ‘CC’ type under bench storage cabinets shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The horizontally sliding type in the table length Under Bench Storage Cabinet shall be each having Size:- 750mmL x 500mmD x Approx.: 660mmH, Having One drawer, Two doors, & One Adjustable/ Removable Shelf with positive locking and having post formed rounded vertical side edges QTY-4 Nos per table. The under bench cabinets shall be provide with aluminium PDC handles min. 320mm. Length duly epoxy coated. The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. However the drawers shall be provided with heavy duty telescopic slides having at least load carrying capacity of 45 kg’s. Per drawer iv) Modular type vertical slide able Two tier shelf Reagent Racks with electrical switches and sockets Two tier reagent racks for the above Island type table shall be provided with 'Modular type vertical slideable Two tier shelf Reagent Racks having raised edges in Aluminium Extrusion T6063 grade construction only with 6mm thick wired glass/ compact laminate. Overall Size: Respective Length 1500mmL of the Table x 525mmW (overall) with T6063 grade heavy duty aluminium single piece pressure die casted (PDC) shelf brackets min. 180mm x 50mm section total QTY:- 8 sets per table for reagent racks shelfs. The above shelfs equivalent to the wall tables length of 1500mmL which shall be mounted on Qty:- 2 Nos of verticals Single/Double 2 mm THK GI size:- 150mm x 25mm thk. X 2200mmH, Verticals per table length as required. The height placements of are as indicated in the enclosed reference images. However,1 no.each on the bottom shelf on the either working sides of the Island Table shall be provided with a 4 ft long 18watts LED tube light with a switch and its respective on, off switch with its internal wiring. GI construction Mini Vertical Service channel connector QTY: - 1No. GI powder coated Removable panel shall also be provided. For the racks both working side electrical panels shall be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) Qty:-4 sets per each working side of the Island type table These switches shall be fixed on the front working sides panel of the reagent racks working side. The electrical switch sockets which shall be fixed on the working sides of the table on the height adjustable service panel mounted between the verticals and below the reagent racks having the entire interior length of Single/ Double Verticals.

WALL TYPE SINK TABLE HAVING OVER ALL SIZE :- 750MML X 750MMD X 900MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set. 'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 2 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts. 'AA' Type Storage Module / Cabinet The ‘AA’ type under bench storage cabinets shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The horizontally sliding type in the table length Under Bench Storage Cabinet shall be each having Size:- 750mmL x 500mmD x Approx.: 660mmH, Having Two doors, & One Adjustable/ Removable Shelf post formed rounded vertical side edges QTY-1 Nos per table. The under bench cabinets shall be provide with aluminium PDC handles min. 320mm. Length duly epoxy coated. The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. The above each sink table shall also be provided with :- P.P. Moulded Sink Approx. Size: 600mm L x 450mmW x 300mmD. QTY:- 1No. 3 way heavy duty swan neck Water faucet / tap QTY:- 1No Splash Guard Size: 750mmD x 300mmH x 5mm thk QTY:- 2 No Pegboard with having at least 16 to 18 nos of PP Pegs with SS drain tray QTY:- 1 Set

SITTING TABLE HAVING OVER ALL SIZE :- 750MML X 750MMD X 750MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set. 'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 2 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts. Raceway with Switch and respective Socket: ‐ The above table shall also be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) These switches shall be fixed on the Table mounted electrical MS powder coated separate raceways on the working sides of the tables of Approx. 150 mm H having its length equivalent to the table tops length ie. 750mmL QTY:-2 sets per table

THE DOUBLE DOOR WALL MOUNTED CABINETS FOR THE ABOVE WALL TYPE TABLE HAVING OVER ALL SIZE:- 750 MM L X 370 MM W X 650 MM H The double door wall mounted cabinets for the wall type table shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The wall storage cabinets shall be provided with 2 nos.of shutters and at least 1 No. of vertically adjustable shelve desired to be fixed at a convenient height at a pitch distance beginning one inch onwards. However the shelves shall be mounted on heavy duty brackets, which can be fixed on built in duly fixed punch strips. The above said wall mounted storage cabinets shutters shall be provided with a positive locking arrangement and having post formed full height rounded vertical side edges. The shutters shall be provided with aluminum PDC handles min. 320mm. Length The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. Epoxy coated for all the shutters and the wall storage cabinet. The wall mounted storage Cabinet shall be having provided with Glazed transparent float glass having at least 5mm thickness / opaque Swinging Shutters. The complete laboratory table mounted storage cabinets shall be free from weld splashes, sharp corners & shall be absolutely flush and thereafter coated with approved multi-colour shade epoxy powder coating duly after carrying out the combination of Hot/Cold degreasing 7 tank phosphatizing tank process.

THE DOUBLE DOOR WALL MOUNTED CABINETS FOR THE ABOVE WALL TYPE TABLE HAVING OVER ALL SIZE:- 600 MM L X 370 MM W X 650 MM H The double door wall mounted cabinets for the wall type table shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The wall storage cabinets shall be provided with 2 nos.of shutters and at least 1 No. of vertically adjustable shelve desired to be fixed at a convenient height at a pitch distance beginning one inch onwards. However the shelves shall be mounted on heavy duty brackets, which can be fixed on built in duly fixed punch strips. The above said wall mounted storage cabinets shutters shall be provided with a positive locking arrangement and having post formed full height rounded vertical side edges. The shutters shall be provided with aluminum PDC handles min. 320mm. Length The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. Epoxy coated for all the shutters and the wall storage cabinet. The wall mounted storage Cabinet shall be having provided with Glazed transparent float glass having at least 5mm thickness / opaque Swinging Shutters. The complete laboratory table mounted storage cabinets shall be free from weld splashes, sharp corners & shall be absolutely flush and thereafter coated with approved multi-colour shade epoxy powder coating duly after carrying out the combination of Hot/Cold degreasing 7 tank phosphatizing tank process

SUPPLYING AND FIXING OF 90DEG TABLE MOUNTED ONE WAY VACUUM TAP.

SUPPLYING AND FIXING OF SS304 PIPELINE SYSTEM FOR THE ABOVE 8NOS.OF VACUUM TAPS.

SITTING TABLE HAVING OVER ALL SIZE :- 750MML X 650MMD X 750MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set. 'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 2 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts Raceway with Switch and respective Socket: ‐ The above table shall also be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) These switches shall be fixed on the Table mounted electrical MS powder coated separate raceways on the working sides of the tables of Approx. 150 mm H having its length equivalent to the table tops length ie. 750mmL QTY:-2 sets per table

SITTING TABLE HAVING OVER ALL SIZE :- 1200MML X 650MMD X 750MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set. 'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 2 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts 'C' Type Storage Module / Cabinet The ‘C’ type under bench storage cabinets shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The horizontally sliding type in the table length Under Bench Storage Cabinet shall be each having Size:- 500mmL x 500mmD x Approx.: 660mmH, Having One drawer, one door, & One Adjustable/ Removable Shelf with positive locking and having post formed rounded vertical side edges QTY- 1No per table. The under bench cabinets shall be provide with aluminium PDC handles min. 320mm. Length duly epoxy coated. The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. However the drawers shall be provided with heavy duty telescopic slides having at least load carrying capacity of 45 kg’s. Per drawer Raceway with Switch and respective Socket: ‐ The above table shall also be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) These switches shall be fixed on the Table mounted electrical MS powder coated separate raceways on the working sides of the tables of Approx. 150 mm H having its length equivalent to the table tops length ie. 1200mmL QTY:-2 sets per table

SITTING TABLE HAVING OVER ALL SIZE :- 1926MML X 650MMD X 750MMH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- Table top 18-20mm thick white colour shade solid Ceramic work top to be placed on atleast 4mm to 6mm thick neoprene rubber sheet strip on the top of table frame work including the cross members of the table frame work.. QTY: - 1 Set 'C' Type Moulded Frame work The 'C' Moulded legs of the respective tables frame work shall be in One piece Deep Drawn moulded in 2.5mm thick. CRCA GI coated. The ‘C’ Frame work will be 50mm width x 50mm height and duly epoxy powder coated with self-adjusting nylon levellers. (No tubular construction) QTY: - 3 Sets Per Table. The above frame work will also comprise of the rare bottom, top and front horizontal press metal GI steel members duly epoxy coated. The Table back bottom GI duly powder coated Set of skirting. Each C type frame work shall be provided with 2 no’s each of self-levelling heavy duty nylon levelling bolts 'C' Type Storage Module / Cabinet The ‘C’ type under bench storage cabinets shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The horizontally sliding type in the table length Under Bench Storage Cabinet shall be each having Size:- 500mmL x 500mmD x Approx.: 660mmH, Having One drawer, one door, & One Adjustable/ Removable Shelf with positive locking and having post formed rounded vertical side edges QTY- 1No per table. The under bench cabinets shall be provide with aluminium PDC handles min. 320mm. Length duly epoxy coated. The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. However the drawers shall be provided with heavy duty telescopic slides having at least load carrying capacity of 45 kg’s. Per drawer Raceway with Switch and respective Socket: The above table shall also be provided with 6 Module Plate having 6/16 Amps combined 2 switch & 2 socket Anchor/Legrand (with tables internal wiring) These switches shall be fixed on the Table mounted electrical MS powder coated separate raceways on the working sides of the tables of Approx. 150 mm H having its length equivalent to the table tops length ie. 750mmL QTY:-2 sets per table

OFFICE TABLE WITH SIDE TABLE HAVING OVER ALL SIZE :- 1500mm + 900mm x 750mmD x 750mmH EACH TABLE COMPRISING OF THE FOLLOWING ITEMS:- Table top Table top made up of 25 mm thick plain particle board laminated with 1 mm thick decorative laminate on top and 0.8 mm thick balancing laminate at the bottom, all the edges to be covered with 2 mm thick pvc edge banding in matching colour shade. QTY: - 1 Set. Providing and supply of free standing tables made of 18mm thick MDF board (Conforming to exterior grade as per IS 12406) covered by 0.8mm lamination of approved shade on front with 0.8mm thick backer lamination on other side post – formed edge on front and 0.8mm PVC edge bands glued on sides. Table top height is 750mm from floor level. QTY: - 1 Set. Providing and supply of Floor Standing Storage Cabinet shall be each having Size:- 450mmL x 400mmD x 750mmH, Having One doors, & One Drawer & One Adjustable/ Removable Shelf with positive locking made of 18mm thick MDF board (Conforming to exterior grade as per IS 12406) covered by 0.8mm lamination of approved shade on front with 0.8mm thick backer lamination on other side post – formed bull nosed edge on front and 0.8mm PVC edge bands glued on sides. QTY: - 1 Nos. Providing and supply of Floor Standing Storage Cabinet with castors shall be each having Size:- 450mmL x 400mmD x 750mmH, Having Three drawer with positive locking made of 18mm thick MDF board (Conforming to exterior grade as per IS 12406) covered by 0.8mm lamination of approved shade on front with 0.8mm thick backer lamination on other side post – formed bull nosed edge on front and 0.8mm PVC edge bands glued on sides. QTY: - 1 Nos. Raceway with Switch and respective Socket: ‐ The above table shall also be provided with Module Plate having 6/16 Amps combined 1 switch & 1 socket Anchor/Legrand (with tables internal wiring) These switches shall be fixed on the Table mounted electrical MS powder coated separate raceways on the working sides of the tables of Approx. 150 mm H having its length equivalent to the table tops length.QTY:- 4 No. per table .( Along with 'Electrical Data Point QTY:- 1 No per table and Voice Point QTY:- 1 No per table which shall be without any internal wiring). PVC Cable Manager QTY:- 1 No

High Back Mesh Office Chair With Chrome Star Base

Rolling Chair Lift Swivel Stools / office chairs with five chrome star base,hand rests and alongwith Backrest.

WALL MOUNTED CABINETS HAVING OVER ALL SIZE:-900 MML X 300MMW X 600MMH The double door wall mounted cabinets for the wall type table shall be manufacture only from GI (120GSM on each side of the surface) Prime quality steel sheets of material thickness at least 1.2mm thk & above. The wall storage cabinets shall be provided with 2 nos.of shutters and at least 1 No. of vertically adjustable shelves desired to be fixed at a convenient height at a pitch distance beginning one inch onwards. However the shelve shall be mounted on heavy duty brackets, which can be fixed on built in duly fixed punch strips. The above said wall mounted storage cabinets shutters shall be provided with a positive locking arrangement and having post formed full height rounded vertical side edges. The shutters shall be provided with aluminum PDC handles min. 320mm. Length The shutters of the storage modules shall be proved with S.S 304 having 5 butt having thrust bearing hinges of at least 2.4mm thickness. However the hinges shall be installed in a manner where the same shall not be visible from the elevation than the storage module is in closed condition. Epoxy coated for all the shutters and the wall storage cabinet. The wall mounted storage Cabinet shall be having provided with Glazed transparent float glass having at least 5mm thickness / opaque Swinging Shutters. The complete laboratory wall mounted storage cabinets shall be free from weld splashes, sharp corners & shall be absolutely flush and thereafter coated with approved multi-colour shade epoxy powder coating duly after carrying out the combination of Hot/Cold degreasing 7 tank phosphatizing tank process.

STEEL CASE (BID ID -3324331)

Genetix biotech Asia Pvt. Ltd. (BID ID -3327820)