Development of 5 nos Parks near House No 4-P, 8-P, 9-P, 14-P and 38-P in Sector-57, Horticulture Division, MCG.

Amount

Providing and fixing public information board consisting of 75 mm G.I. Pipe of size 2.45 metre x 1.15 metre with 900 mm x 900 mm G.I. Sheet 16 gauge connected/welded with 5 mm thick steel plate of 50 mm duly painted as per column mention in drawing and fixing at site in 60 x 60 x 75 cms cement concrete in 1:2:4 block complete in all respect

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2” and ¾” and vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site.

merry go round 4 seater 5dia main frame is m s sq pipe round pipe centrel pipe which further pipe supports with pipe ball bearing assembly chair made of molded frp plastic pu primer and pu paints

sea saw 4 seater 8 lx5 5 Hw X 15 high frame of ms pipe 2 x 12 guage sittibg planks is of pipes and handle seats 4 nos. molded frp material

Providing and fixing 3/4`dia Hydrant connection

-Pull Chair and Push Chair ( Two in one ) 1. Dimensions (LxWxH) 1800 x 700 x 1800mm. 2. Fabricated with main post of NB 100mm (G.I) `C` Class pipe of approved make. 3. Seat main frame of NB 50 mm (G.I.) `C` Class pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) `C` Class pipe. 4. Handle frame of pipe NB 32mm and NB 25mm (G.I.) `C` Class. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters. 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints. 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness UV resistant and colored. 10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00mm thickness, coloured, UV resistant and environment friendly. 11. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the Each NSADRate 5.00 32,400.00 162,000.00 Work Name Work Code Sub Division Estimate Amount Lumpsum Amount Total Amount Renovation and Beautification of 10 Nos Parks of Sector-9A and Chath Pooja Ghat of Ward no. 14 Zone 1 MCG GUR01220210412230 155 Gurgaon 17414401.22 0.00 17414401.22 equipment manufactured. 12. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 15. High tensile steel with galvanized nut bolts are used for assembly. 16. Equipment made to GS mark, EN16630, DIN 79000 and ISO 14001 international standard for outdoor fitness equipment. 17. Self-explanatory stainless steel label fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, transportation

Air Walker: Providing designing and fixing of Air Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and rest of pipes or 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped gaivahized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints or pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps base plate cover shall be made or virgin LLDPE plastic by rotational moulding with minimum 3mm thickness UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments maufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer in charge. The equipment shall be fitted with in built limiters. The equipments shall be fixed on ground with concrete or minimum strength M-25 and J shaped welded bolts and when concrete is set fixing the equipment on to it and cover nuts and bolts with base plate cover all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour (of metal seat and pedal) and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Providing and fixing of Gate valve for hydrant connection

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick.

-Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame and vertical legs is of G.I pipe of jindal make 2” x 12 gauge. It stays with G.I pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with G.I chain 6mm thick duly plated with ball bearing and m.s flat 6mm thick housing with suitable PU Primer and PU Paints. The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of engineer in charge.

-Multi Play Spiral-N-Tunnel Station Item code: ME-03 Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5`H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog and Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no Including Trans portion and Fixing and all type of taxes .

-Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot

-Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mmb make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick

Providing and Fixing mono block 1 HP motor Texmo make complete in all respect.

NS Item= Ornamental Canopy with base complete in all respect – with 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top and bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation and construction of canopy base should be made of earth work .15 m deep, Brick ballast .15 m depth,two steps of first class brick work 1:5 of 3.00 mX.30 mX.45 m and 3.00 m X.30 m X.60m, cement concerete on .10 height and finishing with checqurred tiles on the base and steps. (Including fixing at site and supervision and transportation and all type taxes)

Bidder Name

Amount

Anant Ram (GSTN-06ANPPA0388K1ZT) BID ID -942872

professional contracts pvt ltd (GSTN-06AAJCP1585B1ZK) BID ID -960734

M/s Lakshay and Co. (GSTN-06CDBPS7952K1Z0) BID ID -961251

McCROMIK Industries (GSTN-06AQGPP0869A1Z0) BID ID -961399

Manoj Kumar Pahuja (GSTN-06AGSPP3074F1Z4) BID ID -962537

The Ridhi Sidhi Co-op L&C Society Ltd(GSTN-NA)--958549

ADARSH GROUP(GSTN-NA)--950953

M/s Nitin Enterprise(GSTN-NA)--963568

Surender Kumar Contractor(GSTN-NA)--963509

M/s JMD Maha Meva Group(GSTN-NA)--963530

Anant Ram

M/s JMD Maha Meva Group

professional contracts pvt ltd

Manoj Kumar Pahuja

The Ridhi Sidhi Co-op L&C Society Ltd

M/s Lakshay and Co.

ADARSH GROUP

McCROMIK Industries

Surender Kumar Contractor

Surender Kumar Contractor

The Ridhi Sidhi Co-op L&C Society Ltd

M/s JMD Maha Meva Group

M/s Nitin Enterprise

M/s Lakshay and Co.

professional contracts pvt ltd

McCROMIK Industries

ADARSH GROUP

Manoj Kumar Pahuja