Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹30.0 L+₹2.8 L (10.3%)Rejected-Finance 111 GB MARG YADAV ELECTRIC MARKET LUCKNOW UP 226018 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226018 | L2 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
16 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT LUCKNOW
IMPROVEMENT OF ELECTRIC SUPPLY THROUGH BUS BAR TRUNKING FOR MAFI SUB STATION NO 01 AND RATIONALIZATION /IMPROVEMENT OF STANDBY SUPPLY TO AC PLANT DBS AT WSA AND ADDN/ALTN TO POL STORE FOR USE OF VISITING SQN AND PROVN OF PARKING SHED AT AF STN BKT
2023_MES_622742_1
8732/BKT/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BKT
7 documents required · 7 mandatory
₹500
GE (AF) BKT
₹66,000
28 Mar 2024
11 Oct 2023
18 Nov 2023
11 Oct 2023
16 Nov 2023
28 Oct 2023
Amount
S& F, commissioning and testing factory made compact air insulated copper bus bar truncking (BBT) system in any length 3 phase & 1 neutral with isolated earth copper bus bar, rectangular in section, low impedance, high conductivity of 1000 amp, 450 V, 35 KA breaking conductivity of 1000 amp, 450 V, 35 KA breaking capacity for phase neutral and half core earth, mounted on insulators including separators, rate insulation level 1100 volt grade, insulation class F complete with CRACA sheet metal enclosure totally enclosed type, duly powder coated paint, IP 54 production including fixing in proper alignment and security by means of brackets, clamp nut bolts and screw of adequate size/ capacity and number for load cap as recommended by manufacturer complete with flexible joints end of fixing adopter box including dismantling approx 25 m existing BBT of 1000 Amps, 3 Phase and Neutral with earth strip from LT panel, Isolation Transformer, servo voltage stabilizer, DG Control panel, and Transformer and refixing including cutting drilling as required and connection with new/ existing BBT between LT panel, Isolation Transformer, servo voltage stabilizer, DG Control panel, and Transformer as per required sequence (schematic) complete all as specified and directed. Make : C&S/ L&T/ siemens/ Havells of CPRI approved Note : (i) Existing BBT is of make C&S (ii) Preference to size of existing bus bar
Material & Labour for disconnecting ,opening electric connection from existing system and transporting loading /unloading safely for shifting of DG set with AMF panel of 160 KVA from MAFI substation No 2 to WSA (DB-1) including reinstallation ,commissioning ,connecting &testing all as specified and directed by Engr-in charge
M&L for construction of foundation of DG set with cement concrete type B2 1:2:4 using 40 mm gradeed aggregate including necessary earth work complete all as specified and directed by engr in- charge
Excavation in trenches in soft/loose soil not exceeding 1.5 m deep and not exceeding 1.5 m wide and getting out for foundation etc. complete all as specified and directed.
Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thickness complete all as specified.
Removal of surplus soil to a distance not exceeding 50m and depositing wgere directed at a level not exceeding 1.5m above the starting point complete all as specified.
Supply and laying dry sand cushioning for cable protection in trenches 8 cm before laying cable and 15sm deep cover the cable complete all as specified and directed.
Supply and laying bricks for protection of cables using sub class "B" bricks laid dry flat across length of the cable with width equal to the length of brics complete all as specified and directed.
Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of 120sqmm 3.5 core.
-do- of size 70 sqmm 3.5 core.
Supply and fixing tubes light grade galvanised 80 mm dia with all fittings and fixed complete to walls, road and poles for protection of cable.
Boring of holes under road pavement hard standing by any means including hdpe pipe of 150mm dia suitable for 0.4 mpa working pressure including necessary fitting complete all as specified and directed The work should be carried out without damaging of the existing NET cable ,telephone cable ,BSNL cable ,electric cable and pipe etc
M&L for Earthing complete with galvanised steel earth plate electrode 600×600× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel beside welding at all joints as shown on drawing and inccluding excavation and earth work , GI pipe light grade 40mm bore for protection of gi strip from earth electrode to qand connected upto test point including the earth test point of galvanised iron/steel . supplying and laying of charcoal dust ,common salt ,PCC 1:2:4 type B-1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4 ) type B-1 using 20 mm graded stone aggregate reinforced with 6mm dia round bars @75mm c/c both ways with MS handle 12 mm dia PGI funnel and wire mesh ,20mm dia GI pipe medium grade for watering all as shown in electrical plate No. 3 SSR Part -I and connected to earthing test point all as specified or indicated including testing on completion.
S&F MCCB 4 pole 320 Amp 35 KA with adjustable thermal magnetic release type complete with sheet metal encloser fixed on wall complete all as specified and directed
S&F Off load change over switch 4 pole ,415 V ,capacity 200amps with sheet metal encloser fixed on wall complete all as specified and directed Make ; L&T / Schneider or Equivalent
S&F in existing panel MCCB 100 Amp 4 Pole and 16KA rupturing capacity with adjustable thermal magnetic release type complete all as specified and directed.
Demolition of cement concrete of any description and in any position and Removing excavated material in 100 m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified etc complete.
M& L for 75 mm thickness PCC 1:2:4 type -B-2 (40 mm graded crushed stone aggregate) as in floor finished complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished rough to receive the floor tiles etc complete all as specified and as directed.
Taking down cement plaster on brick or stone walls or stone walls etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4 all as specified.
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified.
Dismantling plain or galvalume aluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in ridge ,valley gutter etc and fixed with self tapping screws and flat iron complete all as specified and directed.
S&F plain steel sheet 1,25 mm thickness in wall cladding,steel gates and similar work,cut to size,holes punched:including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams,including bending or turning up,mitred angles,etc. as required complete all as specified and as directed.
M&L for preparation of old steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying one coats of synthetic enamel paint over one coat of zink chrome primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface.
Use and waist for formwork to sides and soffits of floor or room beams, beams haunchings, girders, bressummers, lintels, girders, bressummers, lintels, cantilevers, shelves includings supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete all as specified etc complete.
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.(Column footing , Column and PB) all as specified etc complete.
M&L for Reinforcement concrete M-25 (20 mm graded aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified etc complete.
Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and as directed.
M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 all as specified etc complete.
M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks all as specified etc complete.
M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified etc complete.
Material and labour rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty and one coat of primer complete all as specified and as directed.
Material and labour for Applying two coats of Oil bound distemper on old surfaces of walls over wall care putty and one coat of primer including preparation of surfces complete all as specified.
Material and labour for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and smooth without using extra cement (up to 4th storey with necessary scaffolding complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new plastered/ concrete surfaces of walls to achieve smooth and even surface and applying two coats of Weather proof paint in camouflaging pattern (combination of three colour) over one coat of alkali resistant primer complete all as specified and as directed.
Material and labour 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.
Material & labour for pressed steel frame of size 105mm x 60mm made out of 1.25mm sheet for doors single rebated including mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I including applying two coats of existing surface finishes of the building complete all as specified and as directed.
S&F Flush shutters, 40 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
M&L for preparation of new or previously untreated wood or wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling with knife of same colour where required to achieve smooth and even surfaces complete all as specified and as directed.
Supply and fixing Aluminium anodised barrel tower bolt of extruded section of size 125mm.(ISI marked) complete all as specified and as directed.
Supply and fixing Aluminium anodised handles 125mm size all as specified and directed (ISI marked) complete all as specified and as directed.
S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.
S&F 100mm long butt hinges extruded alumn alloy with galvanised mild steel hinge pin, anodized and fixed complete all specified.
Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including locking arrangements complete all as directed by the Engineer-in-Charge.
Material & labour for framed work such as grills grating etc with ends of bars shouldered and /or riveted , or forged into spike; framed guard bars, barred iron doors, leaders, framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.
Supply and fixing Sheet glass ordinary quality 3mm thick and glazed with oil putty or any types of beads in square n.exc 0.5 Sqm each pane in any type of frame of Iron/ Steel/ Wood/ Aluminium as requiredat site complete all as specified.
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of zink chrome primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface
M&L for providing, cement concrete type B1 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.(the rates include for use of formwork))
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.
Material and labour for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L for Plain cement concrete (1:4:8), type D-2 (using 40 mm graded crushed stone aggregate) nominal mix, 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.
M&L for 75 mm thick cement concrete 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) as in levelling course of hardstanding, finished even and smooth complete all as specified and directed.
Excavating to post holes each n. exc. 0.50 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing a surplus soil to a distance n. exc. 50 m and making good surface complete.
M&L for Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass-concrete all as specified and as directed
M & L PCC (1:2:4) Type B-2 using 40mm graded stone aggregate in foundation, filling and mass concrete.
S&F steel work in tubuler trusses with post,rafter, MS gusset plate etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified & directed.
S&F Plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment.
M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.
S&F mild steel flat as in wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.
M&L for brick work with sub class "B" brick (using old size bricks)straight or curved on plain exc 6m mean radious built in cm 1:6 complete all as specified and directed.
M&L for 15mm thcik rendering on other than fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified
M&L for two coats of cement base paint over a coat ofalkali-resistant priming paint including preparation of surfaces complete all as specified and as directed
M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.
Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.
M&L GI Tubing light grade with all fittings and fixed complete to wall , poles and ceiling or laid in floors/roads of size 40 mm dia complete all as directed. (1.2 Rm in wall+4.8 RM for LA)
Supply, laying, passing through pipe, connecting & testing UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade (Note- Excavation, Earth work, pipe etc will be measured & paid separately) XLPE cable of size 16 sq mm 2 core complete all as specified and directed.
M&L for flame proof point wiring with two single core FRLS-H PVC insulated & PVC unsheathed multi stranded copper conductor cable of size 1.5 Sqmm 1100 volts grade in and including stove enamelled steel conduit of size 20 to 25 mm with all accessories and one single core PVC insulated & PVC sheathed multistranded FRLS-H copper cable of size 1.5 Sqmm 1100 Volts grade as earth continuity conductor connected to common earth dolly, switch board complete incuding cutting chesses on wall/ floour/ ceiling etc. & making good the disturbed surface with 1:4 cement morter all as specified for one light / fan point controlled by one 5 Amps flameprrof switch one way complete.
Supply and fixing LED Light Fitting 1x18 Watt flame proof ,CMRI certified recommended for gas/vapour group of IIA &III B ,zone 1 and 2 and IP 65 Protection with die cast alluminium housing with heat resistant toughned glass with LED tube light, fixtures, driver holders ,connectors etc complete with all accesories prewired and including connecting with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge..
M&L switch flame proof rotory type with termination box in LM 6, 16 A,single phase 250 volts,complete all as specified and directed by Engr-in-Charge..
S & F flame proof DB SPN 4 way DB including all fixing accessories complete all as specified and directed by Engr-in-Charge..
S&F MCB SP, 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA "c" Series complete all as specified .
S&F MCB DB 20 Amps, 240 Volts, breking capacity 10 KA complete all as specified .
Supply installation and testing of flame prrof metallic body exhaust fan single phase 230 Volt 50 Hz 300 mm 1440 RPM with louvers and shutter including civil work Ii.e. making of holes and complete with all fixing accessories all as specified and directed by engr-in-chrge
Supply installation and testing of flame proof wall mounted Air circulator 400 mm sweep group of IIA &III B ,zone 1 and 2 with high speed and aerodynamically designed metalic blades/body, heavy duty, jerk free and smooth oscillation and complete all as specified and directed by EIC.
Supply and fixing new generation energy saving & enivornmental freindly long life LED street light made up to pressure dia cast housing with toughned glass and individual high power LEDs with secondary optics ,IP 66 protection and impact resistance of IK 07 and electronic driver of 45 watt 5700 K complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 2.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed.
Supply & fix Single pointed Air termination Aluminium Rod 12 mm dia 300 mm long .
Supply & fix Test point terminal block made out of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 Nos, 8mm dia 25mm long hexagonal head screws all as specified
Supply & fix aluminium strip 25mm x 3mm complete with saddles and fixing screws for fitting the strip.
M&L for earthing complete with copper plate electrode of size 60cm x 60cm x 3.15 mm thick burried directly in ground vertically at a depth not less than 3.25 metre deep below normal ground level with top edge of the plate not less than 2.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using copper strip 20 x 3 mm by means of bolts, nuts, check nuts and washers made of copper and protected by light grade 40 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 3 of SSR Part I ,all as specified and directed by Engr-in-Charge.
Industrial Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .