Renovation and up gradation of Golden Jubilee Auditorium at CSIR CIMAP Lucknow

Amount

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red

Area of slab upto 0.50 sqnn

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):

Rectangular or square

Providing and fixing Brass finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of reputed quality make Godrej or equivalant with necessary screws etc. complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws make reputed brand like godrej or equivalant etc. complete.

Providing and fixing brass hanging floor door stopper, ISI marked,Brass finish door stopper, with necessary screws etc make reputed brand complete.

Brass Door stopper

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Finishing walls with textured exterior paint of reputed brand like Asian Apex ultima or equivant of required Shed.

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, of reputed brand like Asian Royal Shine or equivant having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

One or more coats on old work

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :

With F.P.S. brick tiles

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :

Thickness above 10 mm up to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Stainless steel glass door handle SS grade 304, 32mm, SSS finish OZONE OGH- 55 32mm X 600 mm or equivalent with S.S screws etc .complete as per direction of Engineer in Charge.

OGH 32X600 MM make reputed brand or equivalent

Providing and fixing Channeled wood work perforated panels of width 192mm, thickness of 15mm and length 2400mm, made of Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Protland Maple, sea beech, Siam wood & Mystique walnut, interior White) and a melamine balancing layer on the reverse side of reputed brand like Knauf (Armstrong) or equivalnt. The boards shall have a special performation pattern where the reverse has a " Helmholtz". fluted performation with consecutive 3mm wide groove followed by 13/21mm of visible pane. The edges of the panel shall be " tongye - and - grooved" to fix special clips for installation and seamless visual. The back of the Perforted panel shall have sound absorbing non - woven acoustical fleece hot pressed to achieve NRC up to 0.6. (Averege value of Absorption Co - efficient reading taken at 250 Hz, 500Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm /1000mm and bow less than 1mm/300mm. The panels shall be mounted on special aluminium Splines (keel) using inside clips provided Architect / Engineer - in - Charge. . with iron screws all complete as per direction of Engineer-in-Charge. The panel shall be mounted by tongue and groove mechanism using inside clip on aluminium extruded krrl made of grade 6063 - T5 having dimensions 3000 (L) X 24 (H) 15.5 (W). The Keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. To ensure specification of tiles, Manufacturers Test Certificate is required having complete site address & duly signed by Manufacturer.

15mm thickness

With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) of reputed brand like dunemax tegular of armstrong or equivalent brand.

Supplying and Installation of Window Zebra Roller blind of reputed brand B - 70 / AD - 7012 or equivalent with all complete as per direction of Engineer-in-Charge.

Window Zebra Roller blind

Providing and laying PVC Flooring 2mm thick PVC flooring of reputed brand including cost of tharmocord & Fevicol adhesive, duly insalled on smooth and hard surface of self laveling compund / adhesive and seem less joint.

Providing and fixing double cylender floor spring of reputed brand like OZONE FS-9400 make or equivalent for door as required complete as per the direction of Engineer-in-charge.

Double cylendar floor spring OZONE FS-9400 make reputed brand or equivalent.

Supplying and installation Table

Supplying and installation Alice Procoffeetable Walnut Table make Reputed brand Godrej or equivalant.

Supplying and installation Bobbin 3 str sofa fablthr Tan G make reputed brand Godrej or equivalant.

Providing and Fixing of Optra Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. Installation should be carried out as per recommended procedure and designs approved by the Architect/ Engineer-in-Charge.

Supplying, Installation, Testing and commissioning (SITC) of conventional main fire alarm panel 06 zone capacity with PA system & mic completed including (11 nos) photo electric smoke detector status (Dual LED indicator) with base complete , 02 mannual call point MS body with chain hammer complete , 02 wall mounted hooter MS body LMT type 90 DB complete , 03 Response indicator , Supply and laying FRLS Copper conductor armoured cable 2*1.50 sqmm 100 meter cable , (01) LED Type fire exit signage with 30 mint power back- up, inbuilt battery etc. complete. Note : Warranty will be one year from date of handover or completion of work along with installation report.

Part - B Electrical Electrification work:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group 'A'

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

3 Module (100 mmX75 mm)

6 Module (200 mmX75 mm)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A, 16 kA,TPMCCB

125 A, 16 kA,TPMCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required outlets are required.)

4 way (4 + 12), Double door

8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

single pole

Triple pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc.,directly on ceiling/wall including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm).

Supplying of LED light fitting, surface/recess/wall mounting etc. as given below-

Concealed slim / sleek recessed type, CCT – 6500K, Lifetime – up to 25,000Hrs, Luminous flux – upto 600 lumen, Power Consumption – 20-25W, Single Phase,

Concealed slim / sleek recessed type, CCT – 3500- 4000K, Lifetime – up to 25,000Hrs, Luminous flux – upto 600 lumen, Power Consumption – 20-25W, Single Phase,

LED fitting 600mmx600mm (2ft x2ft), Recessed Type , Superior efficacy- 125 -150 lu /W, Lifetime – up to 50,000Hrs, THD - <10%, Operational Voltage – 140-270V, Luminous flux – 9000 – 10000 lumen, CCT- 6500K (Cool White), Wattage – 60 – 70W, Flicker free light effects, multiple lumen packs)

Wall/Façade LED light, wall mounted decorative type Triangular Power Consumption – 8-10W, Single Phase

Supply, of following sweep, BEE- 5 star rated, ceiling fan with Brush Less Direct Current (BLDC), suitable for operation on, 230 V, single phase, 50Hz, AC supply, Power consumption – upto 40W, No of Blades – Three, Rated speed – 250rpm to 300rpm, Features – Premium Silent fan with energy efficient BLDC motor and remote control (RF technology), aerodynamics blade, made of compound ABS for less air friction and silent operation, Dust resistant coating with metallic paint finish including standard accessories as required.

1200 mm sweep

600 mm sweep

Supply, Installation, Testing and Commissioning of wall mounting fan sweep size - 300mm, suitable for operation on, 230 V, single phase, 50Hz, AC supply, Power consumption – upto 50W, No of Blades – five, Rated speed – more than 1200 rpm, including standard accessories as required.

M/S M.A. CONSTRUCTION (BID ID -756357)

M/S. DYNAMIC INFRA ENGINEERING (BID ID -756697)

RAJ CONSTRUCTION (BID ID -755132)