REPAIR MAINTENANCE OF INTERNAL ELECTRIFICATION AND SUBMAIN WIRING IN BLDGS INCLUDING ELECTRICAL FITTINGS AND FIXTURE CEILING FANS GEYSERS ETC AT DAKSHINESWAR BT ROAD BAGJOLA 2CBPO AND MC MF DET UNDER GE NORTH KOLKATA

Amount

Repair to Internal/Building Electrical system Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside serviceable materials for reuse including making good of the disturbed surfaces, complete all as specified and as directed.

Taking down only old u/s items such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully including making good of the disturbed surfaces, complete all as specified and as directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed.

All as per item No 03 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 03 above but for one 3/5 pin 6 Amps socket outlet on the independent but below the switch board of light points in the same vertical plane board.

All as per item No 03 here in above but for One call bell point control by one bell push switch complete all as specified as directed.

All as per item No 03 here in above but for one light point controlled by two 2 way switch complete all as specified and as directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5sqmm PVC insulated unsheathed multi-stranded copper conductor cable drawn through and including PVC casing caping (medium duty) double lock type, size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switch socket combination etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed. Note for item Nos. 3 to 9:- :(i)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate. Make for item Nos. 3 to 8:- Make :(i) Cable - Havells/ Finolex / KEI / HPL / Polycab /Mescab / RR kabel./PLAZA /standard (ii) Casing-N- capping - Plaza / Presto Plast / Precision

Material and labour for point wiring (concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified as directed.

All as per item No 9 here-in-before but for one 3/5 pin 6 Amps socket outlet on the same board with other switches.

All as per item No 9 here-in-before but for one 3/5 pin 6 Amps socket outlet on the independent board.

All as per item No 9 here in above but for One call bell point control by one bell push switch complete all as specified as directed.

All as per item No 9 here in above but for one light point controlled by two 2 way switch all as specified and as directed.

Material and labour for point wiring (Concealed type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of GI boxes of thickness not less than 0.8 mm thick and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed. Note for item Nos. 9 to 14: (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be measured and paid separately. Make for item Nos. 9 to 14: (i) Cable - Havells/ Finolex / KEI / HPL / Polycab /Mescab / RR kabel. /PLAZA / standard (ii) PVC Conduit :- Plaza / Presto Plast / Precision / Prayag.

Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed .

Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed.

Supply and fix switch socket combination 5 Pin 6/16 Amp flush type with complete all as specified and as directed.

Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified as directed

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.

Supply and fix bell push, flush type 6 Amps complete all as specified and as directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed..

Supply and fix call bell Ding Dong, AC, 230V single pole complete all as specified and as directed. . Make for item Nos.15 to 24:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL / C&S / Standard

Material and labour for sub-main wiring (surface type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductor of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old sub main wiring with casing caping complete all as specified and as directed. (Note:Three run of 4.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC Casing & caping shall measured as one unit).

Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, FRLS single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old sub main wiring with casing caping complete all as specified and as directed. (Note:Three run of 6.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC Casing & Caping shall measured as one unit). Make for item Nos. 25 & 26:- (i) Cable - Havells/ Finolex / KEI / HPL / Polycab /Mescab/ RR kabel. /plaza /standard (ii) Casing capping - Plaza / Presto Plast / Precision

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (i):Three run of 4.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit). (ii): Chases cutting for wiring shall be measured and paid separateli.). Make:- (i) Cable - Havells/ Finolex / KEI / HPL / Polycab /Mescab / RR kabel./ plaza/ standard (ii) PVC Conduit :- Plaza / Presto Plast / Precision / Prayag.

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (i):Three run of 6.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit). (ii): Chases cutting for wiring shall be measured and paid separateli.). Make:- (i) Cable - Havells/ Finolex / KEI / HPL / Polycab /Mescab / RR kabel./ plaza/ standard (ii) PVC Conduit :- Plaza / Presto Plast / Precision / Prayag.

Material and labour for sub-main wiring (Surface type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 10.0 Sqmm and one run of 10.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC Casing Caping (medium grade) of adequate size with fittings and accessories as required at site all and taking down old sub main wiring with conduit as specified and as directed. Note:- (i) :Three run of 10.0sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC Casing Caping shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate. Make:- (i) Cable - Havells / Finolex / KEI / HPL / Polycab /Mescab / RR kabel./plaza/ standard (ii) Casing-N- capping - Plaza / Presto Plast / Precision

Supply and fix in replacement powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door)4 way, 240 V with 200 amps rated busbar DIN channel, neutral link & earth link superline complete all as specified and as directed. .(Chase cutting & make good disturb surface is included in unit rate) Make :-L&T/Havells/ABB/Indoasian/Legrand or equivalent

All as per item No 30 here in above but for 8 way SPN DB.

All as per item No 38 here in above but for 12 way SPN DB.

Supply and fix in replacement vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100 A)as incomer including MCCB+12 modules incoming and outgoing make good of damaged surface/wall including re-connection with existing earth wire to DB complete all as specified and as directed. Note:- MCCB shall be measured and paid seperatly. Make: L&T/Havells/ABB or equivalent .

Supply and fix in replacement MCCB triple pole & neutral 40-100 amps,,16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed . Make : L&T/Havells/ABB/Indoasian or equivalent

Supply and fix in replacement MCB single pole & neutral / Double Pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed Make : L&T/Havells/ABB/Indoasian or equivalent

Supply and fix in replacement MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Make : L&T/Havells/ABB/Indoasian or equivalent

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 5 of SSR Pt I including taking down old earthing complete all as specified as directed

Supply and fix in replacement GI wire 4.0 mm as earth continuity conductor complete all as specified and as directed.

Supply and fix in replacement GI pipe 15 mm bore (dia), light-grade for protection of earth electrode complete all as specified and as directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal / Nezone / M/S BST Infratech Ltd.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 5 of SSR Pt I including taking down old earthing complete all as specified as directed

All as per item no 40 above but using copper plate 60x60cmx3.15mm thick electrode and 20x3mm copper strip as earthing lead complete all as specified and as directed.

supply and fix in replacement of Advance conductive compound based chemical compound technology in repair with upgraded high tensile low carbon steel rod as per UL 467 and as per BS 7430 with copper coating 250 microns, earthing system confirming to IS:3034. The ROD should 17.2 mm & 3 meter length with rod to tape clamp, CR 125 (type A) additonal protection of the terminal. Chemical compound should be the highly conductive cmpound as per BSEN 50164-7 with 25 Kg each bag & resitivity should be 0.05 ohm meter. The job includes digging the pit and refilling the same by fursecem Back fill compound (Ground enhancer), the BFC should be eco friendly it should not contain environmentally hazardous material/metal having mixed with 3:1 cement, a conductive concrete is formed. The earth pit should provided with a light weight inspection pit cover PT-205 for protection and safe guard of terminals. In areas where soild condition is bad good earth is to be arranged to fill the excavated pits by mixing furseCEM- a convenient sand permanent solution by adding with 3:1 ration chemical compound with the earth electrode is the main component of the earthing system which is in direct contact with the ground and thus provides a mean of releasing or collecting earh leakage currents. The material should have good electrical conductivity and anti corrosion property in wide range of soil conditions. Make : ABB furseCEM /. Each earth pit should contains :- 1. 1 No copper bonded high tensile low carbon steel, 17.2 mm dia, 3 meter length. 2. Rod to tape clamp (type A) 3. 25 Kg chemical compund as per BSEN 50164-7 4. Light weight inspection pit cover with 5000 kg wight load capacity

Supply and fix in replacement Copper Strip size 20mm X 3mm (Taking out GI Wire) as earth continuity conductor with saddles and fixing screws etc complete all as specified and as directed.

Supply and fix in replacement LED tube rod of capaicty 18/20 watt all as specified and as directed.- Make : Havells/Bajaj/Crompton/Philips or equivalent

Supply and fix in replacement only batten without LED tube suitable for 18/20 watt 4ft led tube rod all as specified and as directed.- Make : Havells/Bajaj/Crompton/Philips or equivalent

Supply and fix in replacement LED tube light fitting including LED tube rod (LED Batten) of extruded alluminum and PC diffuser of 18/20 /22 Watt and two Nos 2nd class hard wood round block and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fittings all as specified and as directed. Make:Havells/Bajaj/Crompton/Philips or equivalent

supply and fix led light fitting mirror type high output diffuser 2 ft ,10 watt, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of sutiable size all as specified and as directed. Make (Light fittings):Havells/Bajaj/Crompton or equivalent

supply and fix round shape 6 watt, 220 volt , AC recessed type with high efficiency PMMA diffuser soft glare free light complete with diffuser, holder, led lamp sutiable for roof ceiling including connecting up with three core flexible copper conductor cable of sutiable size all as specified and as directed. Make:-Havells/Bajaj/Crompton or equivalent

Supply and fixing LED luminaire 600 mm x 600 mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make ( LED luminaire ):L&T/ABB/ Havells or equivalent

Supply and fix In replacement LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make ( LED luminaire ):L&T/ABB/ Havells or equivalent

Supply and fix in replacement LED lamp (B22 Base type) of 1x7 W after taking down the old unserviceable CFL/GLS lamp complete all as specified and as directed. Make ( LED lamp): L&T/ABB/ Havells or equivalent

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete ncluding taking down old unserceable light fitting all as directed Make:- L&T/Havells/ABB or equivalent

Supply and fixing in replacement flame froof 2x16w/20w led tube light fixture WIith tube recommended for Gas / Vapor of IIA & IIB and Zone 1 and IP65 Protection all as specified and as directed. MAKE-: L&T/Havells/ABB or equivalent

Supply and fix in replacement contactor with digital type timer switch for street light for 24 hrs operation including connection with existing serviceable DB and programming complete all as specified and as directed. Make:- L&T/Havells/Legrand or equivalent

Supply and fixing in replacement LED light fitting 25/35 watt energy saving versatile pressure die-cast aluminium building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and as directed. Make : Havells/Philips/Bajaj/Crompton or equivalent

Supply and fixing in replacement LED light fitting 45 watt energy saving versatile pressure die-cast aluminium building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and as directed. Make:Havells/Philips/Bajaj/Crompton or equivalent

All as per item no 56 here above but for 60 Watt complete all as specified and as directed. Make:- Havells/Philips/Bajaj/Crompton or equivalent

Supply and fix LED post top lantern with post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection including 20 Watt LED lamp with all accessories and fixing in existing post complete all as specified and as directed. Make:- Havells/Philips/Bajaj/Crompton or equivalent

Supply and fix in replacement modular switch 1 way(including back plate), 6 A, 1 module complete all as specified and as directed.

All as per item no.59 but 16A, 1 module complete all as specified and as directed.

Supply and fix in replacement socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

All as per item no.61 but socket 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

Supply & fix in replacement Bell push switch designer modulare type 1 module,complete all as specified and as directed.

Supply & Fix in replacement modular type power unit 25 amps complete with 4 module plate, starter plug and socket . complete all as specified and as directed. Make-Crabtree (Sapphire) or Havells / C&S Bajaj / Havells

Repair to E/M appliance(Geyser) Taking down Gysers of any make/ model / type / capacity after disconnecting all electrical and water supply line for repair/ replacement of parts and components, making the geyser in fully working condition, refixing in old position after repair/replacement complete all as specified and as directed by Engr-in-charge. Note :- (i) Spares used in replacements will be measured and paid seperately as supply only). (ii) The labour element involved in replacing the spare is deemed to be included in the unit rate quoted. (ii) The unit rate shall also be deemed to include for minor spares required for the functional utility of the appliance.

Supply only Apparatus assembly plate ( 8/9 hole) for Gyser of 25 Ltrs / 50 Ltrs capacity (as per existing sample) complete all as specified and directed.

Supply only Thermostat straight stem type complete all as specified and directed. Make : Bajaj/ Elcon/GirishEGO.

Supply only Heating Element 1500 watt suitable for Gyser of 25/50 Ltrs capacity Triangular/Round type complete all as specified and directed. Make : Bajaj / Rex

Supply only Indicating (Red/Green) lamp LED type (square/Round) button type for Gyser of 25/50 Ltrs capacity complete all as specified and directed. Make:- C&S / HPL / L&T / Bajaj.

Supplyonly PVC flexible cold water inlet pipe 15 mm dia 600 mm long complete all as specified and directed. Make : Prayag / Polytuf / Supreme / Prince.

All as per item No.70 here-in-before but Hot water pipe ( Inlet wiremess type). complete all as specified and as directed.

Supply only cast copper alloy, CP, stop cock, ISI marked, 15mm bore complete all as specified and as directed. Make::- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag. .

Supply only round type 3 core incoming copper cable of size 2.5 sqmm for 25/50 Ltrs capacity Gyser complete all as specified and as directed. Make : Finolex / Havells / Polycab/ Mescab / RR kabel / C&S / KEI.

Repair to fan: Taking down carefully Ceiling Fans of any make, model and capacity from their existing places for replacement of bush, bearing, Capacitor, servicing i. e. lubricating / Greasing and for rewinding/ painting by dismantling the same and keep the blades, canopy, splitpin and other parts and components in safe custody and hanging / fitting on it's previous position after repair/rewinding/painting/replacement of spares etc complete all as directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of fans or as per existing make of spares, as approved by the GE. (iv) Rewinding and painting shall be measured and paid separately. Existing makes :- Bajaj, Khaitan, Usha, Himadri

All as per item No. 74 above but Exhaust Fans

All as per item No. 74 above but Air Circulators wall mounted Fan

All as per item No. 74 above but floor mounted pedestal fan

Supply only GM Bush for ceiling fan 1200/1400 mm sweep/ Exhaust Fan 230/300/350/450 mm sweep/or any type fan complete all as directed.

Supply only Ball bearing (cat No. 6201) for ceiling Fan/Exhaust Fan / or any type fan complete all as directed.

All as per item No. 79 here-in-before but cat No. 6202.

All as per item No. 79 here-in-before but cat No. 6203.

Supply only capacitor 2.5 mfd, 220 volts complete all as directed. Make:Tipcon / Universal / Sarda / Usha. / C&S).

All as per item No. 82 here-in-before but 3.0/4.0 mfd.

Supply and fix in replacement of louver shutter for 300 mm sweep exhaust fan, of existing make, made of MS sheet folded type complete all as specified and as directed.

All as per item No 84 here-in-before but for 450 mm sweep exhaust fan.

Material and labour for painting by spraying with synthetic enamel paint to Ceiling Fans / Exhaust Fans/ Air Circulators wall mounted Fans/Floor mounted pedestal Fans including Blades/Down rods/ Canopy/Stand, Casing/ Cage and all accessories after preparation of surfce including thoroughly rubbing /cleaning old rusted spot complete all as specified and as directed. Make of paint:- Asian / Berger / Jenson & Nicholson / Shalimar.

Material and labour for Rewinding of ceiling fans armature of 1200 mm /1400 mm sweep of any make & Model with replacing the burnt out winding by new super enameled high grade copper wire of existing gauge and number of turns and all insulating materials including heat vernishing and testing complete all as directed .

All as per item No.87 here-in-before but for exhaust fan 230mm/ 300mm sweep, single phase, 230 volts

All as per item No. 87 here-in-before but for exhaust fan 450 mm sweep, three phase, 230 volts

Supply and fix in replacement fan blades for exhaust fan of 300 mm sweep as per existing make and type complete all as directed.

All as per item No. 90 here-in-before but for exhaust fan of 450 mm sweep.

Material and labour for lathe work for worn out spindle of ceilling fan /Exhaust Fan/Air Circulators/Wall mounting Fan of any sweep , make & Model with replacing the worn out spindle by new one of existing size and materials including testing for free motion of fans complete all as directed.

Material and labour in replacement of incoming twin core copper flexible wire ( not more than 45cm) of size 14/0.0076 from ceiling rose to ceiling fan / exhaust fans complete all as specified and as directed. Make : FINOLEX / HAVELS / POLYCAB / MESCAB / RR Kabel / HPL.

Supply and fix in replacement 3 pin plug top 6 Amps for air circulator wall mounted fan/ floor mounted pedestal fans. Make :Anchor / Cona / Bajaj / Crabtree / Havells / HPL / C&S / Standard

Supply and fix in replacement 5 pin plug top 16 Amps for air circulator wall mounted fan/ floor mounted pedestal fans. Make:- Anchor / Cona / Bajaj / Crabtree / Havells / HPL / C&S / Standard

Supply and fix in repair 2.5 mfd fan capacitor, 220V all as specified and as directed Make :Tipcon / Universal / Sarda / Usha. / C&S).

Supply and fix 50mm bore galvanised pipe 'medium grade’for fixing ceiling fan including housing/fixing of GI pipe in wall and also making good the disturbed surfacescomplete including taking down old unserviceable pipe all as specified and as directed . Note :(i)Cost of cutting of wall, if any, for housing/fixing of GI pipe and also making good the disturbed surfaces are deemed to be included in unit rate. Make : Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd.

Supply and fix Wall mounting fan 400 mm sweep, 230V, AC 50 Hz, 1360 RPM with blade set, 3 speed with oscillation and tilt mechanism and mounting accessories all as specified and directed. Make:- Havells/Bajaj/ Crompton or equivalent

Supply and fix pedestral fan 400 mm sweep, 230V, AC 50 Hz, 1360 RPM with blade set, 3 speed with oscillation and tilt mechanism and mounting accessories complete all as specified and as directed. Make:- Havells/Bajaj/ Crompton or equivalent

Supply and fix exhaust fan 300 mm sweep, 230V, AC 50 Hz, with oscillation and tilt mechanism and mounting accessories complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. with brushless direct current motor (BLDC) of 35 Watt. including takingdown old unsv ceiling Fan and deposite to the MES store complete all as specified and directed Make:- Havells/Bajaj/Crompton or equivalent

Supply and fix mild steel rod including fabrication of hook ,size as required at site for hanging the ceiling fan including taking down old unserviceable old rod complete all as specified and as directed.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

M/S KARTICK DUTTA

Rounaq Enterprise

PODDAR SALES CORPORATION

NANDYENTERPRISES

RBS Builders

BHARUKA ENTERPRISES