Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹11.0 L+₹2.4 L (27.6%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹13.6 L+₹5.0 L (57.5%)Rejected-Finance 154 HANUMAN MANDIR DIKSHI TAL NIPHAD DIST NASHIK 422 302 | NASHIK | MAHARASHTRA | 422302 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹15.0 L+₹6.4 L (74.1%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST |
Tender Value
₹11.7 L
EMD Value
₹23,350
Closing Date
19 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2023_MES_588000_1
86900/E8
Open Tender
Civil Works
Item Rate
180 days
DEOLALI
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE DEOLALI
₹23,350
Yes
10 May 2023
1 Apr 2023
21 Apr 2023
1 Apr 2023
19 Apr 2023
6 Apr 2023
2 Apr 2023 - 4 Apr 2023
Amount
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.
Surface excavation n.exc 30cm and averaging 15cm and getting out in soft/loose soil all as directed.
Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed.
Ditto all as per Item No 2 above but depth exc 1.50m and n.exc 3.0m in hard dense soil all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.
Removing excavated material exc 1.5 Km but n'exc 5 Km and depositing where directede.
Removing excavated material n, exc 50m and depositing where directed at a level n exc 1.5m from the base.
Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area.
Treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surface (Area of the sub structure in contact with backfill to be measured)
Anti-termite treatment the top surface of filled earth at the rate of 5 lit of emultion per sqm of surface area.
Anti-termite treatment the soil under plinth protection at the at the rate of 5 lit of emultion per sqm of surface area.
M&L for hardcore of broken or boulders of guage n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed.
M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete etc complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix) Slabs supported on walls,beams and columns in loors,roofs, landings, balconies,canopies, deck slabs and in shelves and the lik complete all as specified and directed.
M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.
M & L for use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping) in rough finished surface of concrete complete all as specified and directed.
M & L for use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces complete all as specified and directed.
M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.
M&L Flyash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
S&F 200 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and directed.
S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed.
S&F 150 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete and directed.
S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as directed.
S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.
Ditto but 6mm to 8mm dia complete all as specified and directed.
Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.
M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Applying two coats of bituminous aluminium paint
M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in subbase complete all as directed.
M & L for glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick with and including 10mm thick CM 1:6 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed.
M & L for Non - skid/Glossy finish/Matt finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.06 sqm but n.exc 0.11 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.
M & L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as floor all as per direted
M&L PCC 1:2:4 type B1( 20mm agg), 40mm thick laid in slope of 1:20 and alternate bays incl finished even and smooth without using extra cement and joints in the plinth protection etc complete all as specified and directed.
M&L 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as directed.
M & L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as directed.
M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying one coat of primer over a coat of birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed.
M&L for preperation of new surfaces of ceilings, and three coats of white wash over 5mm thik cement plaster of cm 1:4 on ceillings and all as specified and directed.
M & L for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer red oxide zinc chrome etc complete all as directed.
M & L for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, or laid in floor etc complete all as specified and as directed.
All as per item No 43 above but 20mm bore pipe all as specified and as directed.
S&F new rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete.
S&F 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed
S&F 15mm bore pillar taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed
S&F 15mm bore stop valves, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe with long shank and cup (concealed type) etc complete all as directed
S&F 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as directed.
S&F 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified.
S&F shower arm 15mm size, 195mm long with bend of 45degreee with flange of PTMT any colour. (Minimum weight 40 gms) etc complete all as specified and directed.
S&F fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as directed.
All as per item above but 110mm dia complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius with access door etc complete all as directed.
S&F 110 mm bore PVC (SWR) vent cowl etc complete all as directed.
S&FPVC (SWR) floor trap, plain with grating including jointing with solvent cement with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed.
S & F Vitreous China wash down water closet pan (semi-pedestal pattern (Anglo-Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe)white coloured etc complete all as directed.
S&F glazed earthen ware viterious china wash basin white coloured flat back size 550x400mm, outlet of 32mm bore HDPE outlet pipe with necessary fittings, 32mm bore brass CP waste couplings etc complete all as directed.
S & F PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed.
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate )in benching to man holes and finishing of exposed surfaces of concrete etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed.
S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1 etc complete all as specified and directed.
M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed.
M & L 150mm dia pipe Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
M & L Vitrified ceramic tiles of light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.
Demolition and breaking up Internal dia of pipe in150mmdrain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.
S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed.
S&F coloured powder coated (50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F coloured powder coated (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.
M&Lin repair for 18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinets shutters and shelves cut to the sizes as directed etc complete all as directed.
S & F 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed
S&F 100mm Extruded aluminium alloy handles, fabricated type, anodised
Concrete bed to drain pipe 150mm dia incl pacing under and bunching against the sides to pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone agg,complete all as specified and directed by Engineer-in-Charge.
150mm bore salt glazed stone ware Gde ‘A’ pipes laid and jointed on concrete bed complete incl testing,complete all as specified and directed by Engineer-in-Charge.
M&L 15mm thick Cement plastering in cm 1:4 mixed with IWPC @3% by weight of cement (IWPC shall be measured and paid for seperately) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as spd and directed.
Supply only Integral water proofing compound (IWPC)
S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.
Cement concrete 1:2:4 type B-1 using 20mm-graded stone agg. as in benching/ coping and the like,complete all as specified and directed by Engineer-in-Charge.
Extra for forming fair finished drain channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/ stopped ends etc complete all as specified.
Supply and lay 4 core 16 Sqmm cable XLPE insulated heavy duty screened PVC bedded galvanised steel strip or wire armoured 1100 volts grade with stranded aluminium conductor.
Supply and lay common burnt sub class B bricks for cable protection
M&L sand cushioning to UG cable with layer of 8cm before layinf and 13cm after laying complete all as directed.
S&F 40mm bore light grade GI pipe laid in trenches or under ground for cable protection including clamps ete complete all as directed.
S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Cutting, screwing, threading and fixing 20mm GI tubing for alteration or addition complete.
S&F 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-
One light point controlled by one switch
One fan point controlled by one switch
One 5 pin socket outlet. 5 Amps on the same board.
One 5 pin socket outlet. 5 Amps on the independent. board
All as per item No-93 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.
Supply and fix switch piano modular single pole one way 6 Amps one module complete all as specied .
Supply and fix switch piano modular single pole one way 16 Amps one module complete all as specied .
Supply and fix modular socket outlet 6A - 2/3 pin combined 2 module (multi purpose ) complete all as specified and as directed.
Supply and fix modular socket outlet 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed.
Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.
S & F lamp angle/batten holder Bakelite complete all as specified and as directed.
S & F electronic step regulator modular type (5 Step regulation) for ceiling fans complete all as specified and as directed.
S & F ceiling fans 1200mm sweep, 230V, with down rod, min air delivery 210CFM with service value 6.00 complete all as specified and as directed.
Supply and fixing LED light fitting, 4 feet long 1 x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with jigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
Supply and fix sheet metal enclosure double door 8 way DBs SPN, 240 V with 200 Amps rated bus bars double door complete all as specified and as directed Make : L&T/ Legrand/ Semens
S & F MCB SPN 6 to 40 Amps 240 Volt.
S & F MCB SPN 6 to 32 Amps 240 Volt.
Supply and fixing building LED security light fitting 35 watt 230 V AC conductor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in muliple optics complete with IP 65/66 protection complete.
S & F ceiling mounted 2x2 LED luminaire Pluto neo panel with glare free soft 34 watt complete pre-wired all as specified and directed. Make:-Havells (cat part No PLUTONEOX2PLR28WLED840S)
S&F exhaust fan plastic body 230mm sweep with all accessories including framework for fixing in exinsting window with electrical connections. Make:- Havells VentiAir-DB NEO or equivalent in CG/Bajaj
Supply and fix verticle mounting type electric water heater, storage type ABS (SR) body with stainless steel (SS 304) inner tank , Rated pressure (Mpa) 0.6(Class 1) and copper heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. Make : Havells (Puro turbo)/Bajaj (Shakti Neo) /Racold (Omnis lux)
S & F in Plug & socket enclosure with 20A SP MCB complete all as specified and as directed.
M & L for sub main wiring with 2 single core 4 Sq mm, PVC insulated unsheathed, multi stranded copper conductor FR cable 1100 Volts grade including 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous warth wire drawn through Casing caping and connecting t common earth terminals complete all as specified and directed. Note : Two runs of copper cable and one run of earth wire including conduit/ PVC casing/ caping shall be measured as one length
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion
J Sams Contructions
MAHIMA CONSTRUCTION
shubham Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .