WBPHED/04_10/AE-III/CMD/24-25

Amount

Supply Delivery And installation Of Suitable CRCA enclosure powder Coated Minimum 2mm IP55 protection And suitable for outdoor installation, the Enclosure should have Sufficient space for installation of WBSEDCL energy meter As well As Provision for smooth meter Reading Periodically. (outdoor type Kiosk Box for Receiving Power)

Making CC foundation for Support Of the Kiosk box After excavating the earth upto a Depth of 0.6 Mtr below the GL including Supply of All materials Complete with 12 mm thick cement Plastering With Net Cement Finishing Complete As per Direction Of EIC (Size:3'x1'x5')

Supply delivery and Installation of 32 Amp main Switch at the suitable position of the kiosk Box For Receiving The Power (outdoor type Kiosk Box)

Making wire net fencing of the pump platform by supplying and fitting fixing of Galvanished MS Angle of approved quality which will be grounted in the earth by cement concrete as per direction of EIC including an arrangement for a gate with lock and key facility as per Direction Of EIC

Supply and delivery at site of vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: For T.W No-4 : - Discharge (Q) : 20 mᶟ/Hr. Head (H) : 62 mtrs. Shaft-stainless steel, Impeller- Crome Steel/S.S /NORYL, Outlet - 65/80 mm dia. Motor : Operating Voltage : 415 (± 10 %), Phase : 3ph, 50 Hz ± 6% Speed : 2900 RPM, Method of starting : S/D (Make : KSB / Grundfos / Texmo / CRI / KBL / MBH / or any approved vendor.) ( N.B : Manufacturer's test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.)

Supply, delivery at site And storage of 3 Core 4 Sq.mm water proof Flat submersible cable Make:Finoex/Havels/Polycab/approved make)

Supply & delivery at site of 4 core 16 Sq. mm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Gloster / Polycab / Mescab)

Supply,delivery and Storage of following valves,pipes and gadgets etc. at Site:(a) 80 mm Dia UPVC standards type coloumn pipe(cream Colour with both side threaded and one end side socket with register KPMG), Make : Ashirbad/Approve make of PHED

3 Mtr Long

1.5 mtr Long

80 Mm dia Ci top and bottom adapter

Heavy type 250 mm Dia split type tubwell cover with 12 mm thick clamping arrangement including holes of Coloumn pipe,air pipe And cable entry with 2 sets heavy type suspension clamp,nutsmbolts and washer as per departmental design.

80mm dia Non-Rising Spindle Suice valve (PN-1.0 rating) as perIS14846 for washout line,make:IVI/jupiter/Cair/approved make of PHED.Moc & TC Needed for valve

80 mm N.R.V (PN-1.0 rating) as per IS5312,Make:IVI/jupiter/Cair/approved make of PHED.Moc & TC Needed for valve.

CIDF 90°bend- 1no., CI flanged tee- 1no., blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-2nos, CI/ MS flanged pipe 1mtr.- 1 no. etc (as per IS specification and certification registered) for construction of delivery pipe line and wash out line.

Supply & making necessary GI Medium pipe(dia of pipe not less than 32 mm) protection for submersible cable from Kiosk box to Submersible pump inclusding supply of all specials and complete the job

Making brick pillar 0.25x0.25x0.75 Mtr/suitable Height for supporting of valves and pipes with 12mm thick plaster and net cement finish complete

Installation of Submersiblwe Pumping machinery to newly sunk tubewells along with Coloumn pipe(as required), top cover, valves, Apecial of above protection pipe And supply of MS clamp,nut bolt,cable gland,sockets etc, making inter connection of the pump delivery line to pump collecting main line near tubewell with supply of all neccesary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod Etc. and laying & drawing of all cable & cable protection pie as equired and all to complete the job including all connection & testing commisioninfg as per Direction of EIC

Instalation of departmentally supplied MCC panel by skilled Technical Person under Supervision & Guidance of manufacturer at their respective places by all the Neccesary material &equipments and mending damages good of floor drawing power cable with suitable size by proper wiring and fitting suitable place within the pump house with all neccesary connection as per direction of EIC with testing and commisioning complete,The rate inclusive of Delivery the defective MCC panel at Patelnagar Store

Painting of installation(Viz, pumps,valves,pipe lines etc. by two coat epoxy paint(colour to be declare by EIC) over a coat of primer as per NIT specification and direction of EIC (T/W No. 3)

Excavation of soil for installation of Earth Electrode and filling & ramming.

(a) For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: a) By ISI-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Commisiong of the whole installation and testing by Licenced Electrician after drawing of power cable, fixing of Main switch as per instruction of EIC

Supply and delivery at site of GI octagonal street light pole conical type 7 Mtr length (Top dia 70 mm, bottom dia 130 mm,thick 3 mm base plate 220 x 220 x 12 mm, foundation bolt M20 x 700 with template and anchor plate,bracket Single Arm1500 mm long on single side with 48.3 OD GI pipe& internal junction box (6a,SP MCB & 4-way connector) resin Coated MAke Approved make approved make.

Erection of Grp pole of length 7 Mtr in RCC Foundation of 400x400 mm Of depth of 1300 mm below the GL and 200 mm just above the GL. 4 Nos "J' type foundation bolt of 20 mm dia and 600mm long grounted into RCC foundation ,,There should be provision of 2 no of flexible pvc pipe of 63mm diafor cable entry as per supplied drawing and departmental drawing and design

Supply & Delivery of 90W, IP66 illuminating streets and other outdoor area withbody material is made from PDC and Toughened Extra Clear Flat Glass for durability, Robust Construction, high power LED, with LED Driver to ensure uniform distribution, System Lumen output-11500Lm, Lighting Color Cool White, IK08, lamp colour temperature – 6500K (Philips, GreenLine V2, BRP409 LED115 CW SLC FG PSU GR V2)

Fitting fixing of above supplied Led light fitting complete with all accessories to be fixed with S&F length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and amking connections as required complete

Earthing with 1 no of G.I earth spike (20mm dia X 1.5 mtr. Long) driven into the ground upto 2 mtr. Drawing earth ine with separate 6 SWG G.I Wires providing 15 mm dia. G.I pipe protection from earth spike feeder box/junction box/poles and fixing to the same suitable nuts 7 bolts all complete asper direction of EIC

Ordinary Cement Concrete (mix 1:1.5:3) with graded stone chips (20 mm Nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. a) Pakur variety.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off of chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. i) with 1:6 cement mortar - 15mm thick.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups etc. initial straightening and removing loose rust ( if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter section, complete as per drawing and direction. includiding M.S. angle Size : ( 50 X 50 X 6 ).

Add: GST @ 18% on sum of Item No: 1 to 29

Add Cess @1% on sum of Item No. 30

CHATTERJEE ENTERPRISE

GOENKA ENTERPRISE