SPL REP TO ROAD ALONGSIDE ARA BARRACK NO 3 AND NEW CHILDREN SCHOOL BLDG OF APS AND SPL REP TO INTERNAL ROAD AT JCOS AND OR MD ACCN IN SIG ENCLAVE UNDER GE DANAPUR CANTT

Amount

M&L Preparing for existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for 150mm thick (compacted thickness) water bound macadam in two equal layers of 75mm each (compacted thickness) with coarse aggregate of grading 2 (63 to 40 mm size) for 1st layer and of grading 3 (50 to 20 mm size) for second layer, (surface of each layer will be blinded with screening and moorum, watered consolidated and compacted separately), spread rolled and consolidated to require gradient and camber using granite trap or basalt stone with 8 to 12 tone vibratory power roller complete all as specified & directed.

M&L applying evenly a priming/tack coat with bitumeneous primer at 5 kg/10 Sqm using (VG -30) paving bitumen complete all as specified and directed.

M &L for laying of Bituminous premix semi dense asphaltic concrete on existing black top surface/WBM using mechanical paver 40mm consolidated thickness with 5.5% binder content by total mix, roller and compacted to required camber and gradient paving bitumen with VG - 30 garde to uniform smooth surfaces and rolled with 8 to 12 tonne power roller, complete all as specified and directed.

M&L for marking/Painting lines/dashes etc not less than 2.5mm thickness, dashes, arrows, letter etc on roads, pavements and the like not exceeding 10 cm wide using thermo plastic road marking paint, white or golden yellow using road marking painting machines conforming to specifications laid dwon by MOST-803.4 complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using bitumen Vg 30 Grade @ 4% by weight of aggregate including scrafying existing bituminous macadam and rolled with 8 to 12 tonne power roller complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (40mm graded agg) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work (Except brick) with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surfaceeven and smooth (Without using extra cement ) complete all as specified and directed.

M & L PCC 1:2:4, type B1 (20mm graded aggregate) as in surface channel, drain and coping etc complete all as specified and directed.

M & L for repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water,scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Surface dressing n exc 15.00 cm deep in soft loose soil and removing the same complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bitumeneous primer at 10 Kg/10 Sqm using (VG-30) paving bitumen complete all as specified and directed.

M/s Naresh Chand Agrawal

RC GUPTA AND SONS