Providing Canal based W/S Scheme for village Kinana Tehsil Distt. Jind

Amount

Supply and erection of Horizontal spindle spilit casing type pumping sets of minimum Four(4 ) star rating duties directly coupled to Ac squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Raw Water Pump 1000 LPM, 12 Mtrs. Head

B) Clear Water Pump 1000 LPM, 40 Mtrs. Head

C) Raw Water Pump 1500 LPM, 40 Mtrs. Head

Supply and Fixing following CI D/F pipe and specials/Bell Mouth including cost of joining materials, laying, jointing, refilling inckuding making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the Department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water puping sets at water works in position, as per specification given in schedule No. II. For Pumping Machinery Detail of pipe and specials A) CI D/F bends, Reducers, tees, tapers, tail piece, blank flange etc.pipes excluding jointing material

B) CI D/F pipes I. 100 mm i/d

C) Bell Mouth a)100 mm i/d

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500X1200mm and 400mm deep having following accessories:- 1. Incomer switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp. Capacity. 3. Volt meter 100X100mm range 0 to 500 V (AE/KAPPA/L & T ) 4. Indicating lamp-one set.

A) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm having following accessories:- A) For Raw water pump sets for 1000 LPM x 12 M head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 Nos. for 1000 LPM x 12 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.

B) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm having following accessories:- A) For Clear water pump sets for 1000 LPM x 40 M head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 Nos. for 1000 LPM x 40 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.

C) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm having following accessories:- A) For Raw water pump set for 1500 LPM x 40 M head = 2 Nos. (a) Main switch 63 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 2 Nos. for 1500 LPM x 40 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 63 Amp. = 1 No.

Supply, erection, testing of ISI marked copper wire for 6 nos. motors with underground system in PVC and flexible pipes copper wire size 6 Sq mm complete in all respects with accessories like thimble etc. complete in respects.

Supply, erection, testing of ISI marked copper wire for 3 nos. panel boards from main switch to panel and wiring of panel with size 10 Sq. mm (copper wire) ISI marked complete in all respect with accessories like thimble etc. complete in respects.

Supply, erection, testing of light fittings including wire in the Pump Chamber with material up to 10 points including switch, button, plug, PVC conduct pipe and Copper wire etc. as per approved specifications complete in respects.

Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.

Providing and fixing ceiling fan 1400 mm (56") with speed adjuster of reputed make (make Crompton, Usha, Bajaj, Orient) complete in respect..

Providing, laying, jointing and fixing of cast iron "V" notch with dully makred with beam including embedding in 1:2 cement and grouting, levelling up to finishing complete in respects.

Providing and fixing floating arms along with swivel bend as per required specifications approved by Engineer - In - Charge. (200mm) complete in respects.

Supply, erection, testing of reputed make CFL vapour light 100 watts with fitting and accessories complete in respects.

Supply erection of "Wall Mounting type, solenoid driven, motor-less, electro-magnetic disphragm Dozing Metering pump working on single -phase 220/240 V. / 50 Hz, electric supply with standerd electronic controls, suitable for minimum dozing capacity 0 to 5 LPH, at 8 bar back pressur"e complete with necessary accessories. Make Fontus or any other standard make along with supply & erection of supply & erection of 1 No. voltage stablizer with each dozing pump alongwith 1 No. 300 ltrs. capacity ISI marked HDPE storage tank, with each dozing pump of "Sintex" other reputed & approved make.

Stringing out DI pipes and specials castings along trenches and laying the same in trenches to correct alignment and gradients including cartage from divisional stores or nearest railway station to site of works and return of pieces of pipes to stores. i) 100 mm i/d pipeline laid complete

ii) 200 mm i/d pipeline laid complete

iii) 250 mm i/d pipeline laid complete

Jointing cast iron/DI socketted pipes valves and specials with rubber tyton joints fitted complete including cost of labour and etc. and tested complete. i) 100 mm

iii) 250 mm

Cutting of K-7/ K-9 DI pipes and specials and chipping or filling the surface to a uniform finish. i) 100 mm

iii) 250 mm

Prov & fixing of various sizes CI specials as per ISI specification suitable for CI pipes.

Operation and maintenance of water works as per schedule -IV for a period of 5 years after 3 months trial run period (i) Operation and maintenance during defect liability period (Operation only).

(ii) 1st year after defect liability period (Operation and maintenance)

(iii) 2nd year after defect liability period (Operation and maintenance)

(iv) 3rd year after defect liability period (Operation and maintenance)

(v) 4th year after defect liability period (Operation and maintenance)

Bidder Name

Amount

Parveen Kumar Contractor

Rajinder Parshad Jain Contractor Jind

RAM RAJ CONTRACTOR

Rajinder Parshad Jain Contractor Jind

RAM RAJ CONTRACTOR

Parveen Kumar Contractor

RAM RAJ CONTRACTOR