Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹34.2 L+₹3.2 L (10.2%)Rejected-AOC 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L2 | Rejected-AOC HIGHER RATE QUOTED | |
| 3 | L3₹34.3 L+₹3.3 L (10.6%)Rejected-AOC OPPOSITE J K BANK BAROO NH1 HAIDERY COMPLEX BAROO KARGIL BAROO KARGIL LADAKH 194103 | KARGIL | LADAKH | 194103 | L3 | Rejected-AOC HIGHER RATE QUOTED | |
| 4 | L4₹35.3 L+₹4.3 L (13.9%)Rejected-AOC VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L4 | Rejected-AOC HIGHER RATE QUOTED | |
| 5 | L5₹36.4 L+₹5.4 L (17.5%)Rejected-AOC | L5 | Rejected-AOC HIGHER RATE QUOTED |
Tender Value
₹43.1 L
EMD Value
₹86,200
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_599977_2
8400-979/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a(i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹86,200
Yes
4 Aug 2023
31 May 2023
29 Jun 2023
31 May 2023
28 Jun 2023
14 Jun 2023
Amount
M&L for excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.
Removing excavated soil to a distance n.exc.50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
M&L for providing precast cement concrete in Type B1 1:2:4 (20 mm graded aggregate) in windows or door cills, lintels , bressumers, steps quoin blocks (for use with masonry) string courses, copings, kneelers,apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders etc with plain fair faces, including chamfers, weatherings, throating, etc and setting in mortar CM (1:4) complete with joints to match all as specified and as directed by the Engr-in-charge.
M&L for 500 mm thick Kankar or laterite,with mix of fly ash ,clinker & stone dust in the proportion of 1:3:6 (i.e. 10% fly ash,30% clinker & 60% stone dust ) laying in layers n.exc 10cm thick ,watering ,ramming and compacted to required camber and gradient complete all as directed by Engg-in-charge .
Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne and n.exc 12 tonne complete all as specified and as directed.
M&L for Soling with 150 mm spread thickness (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and considered to required gradient and camber complete all as directed by Engr-in-charge.
M&L for 7.5cm thick(compacted thickness) WBM, with coarse aggregates (basalt type of aggregate) of grading 2 (63mm to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with preparing unsurfaced WBM by brushing with wire brushes for removing mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.
M&L for 100 mm thick PCC (1:4:8) Type D2 (using 40 mm graded stone aggregate) used as in sub base floor/pavings and finishing complete all as specified and as directed.
M&L 150 mm thick PCC M-25 (design Mix) (using 20mm graded crushed stone aggregate) as in hardstanding laid in panels, finishing the surface even and finish the surface by brooming complete all as specified and directed. Note:(i) Material for PCC M-25 shall be carried out from RMC as approved by Engr-in-Charge (ii) Plate viberator to be used for compacting of floor (iii) Contractor shall furnished necessary test report of M-25 and purchase voucher of plant for this aspect before claiming of RAR. (iv) Quoted rates deemed to be included for necessary T&P, Transportation and plasticizer and nothing extra paid to this aspect.
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and as directed.
Forming Contraction (Dummy) joints 65 mm deep x 10mm wide using cut with diamond cutter filled with sealing compound grade B complete all as specified and as directed.
Forming Construction joint 45 mm deep x 10mm wide using cut with diamond cutter filled with sealing compound grade B complete all as specified and as directed.
S&F Reinforced concrete pipes,class NP2, 200 mm bore laid and jointed in trenches or in floors complete with collar complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and as directed.
M&L hardcore of broken stone or boulders of gauge n.exc 63 mm , deposited ,spread and levelled in layers n exc. 150 mm thick , watered and rammed to a true surface complete all as specified and as directed.
M&L for Brickwork with flyash bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed..
M&L for Machine pressed precast prepolished concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M- 50 Grade with grey cement and pigments complete all as specified and as directed.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
All as per item No 20.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified and as directed.
M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
M&L for Cement concrete (1:3:6) Type C2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.
M&L for formwork to sides of concrete, foundation, footings,bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work including vertical or to batter for rough finished surfaces of concrete complete all as specified and as directed.
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and as directed.
M&L for RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC M-25 (Design Mix) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.
M&L for Brickwork with flyash bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engr-in-charge.
S&F wire netting of galvanised steel wire 1.40 mm dia and size of mesh is 25 mm fixed properly with suitable nails at various locations in wall, beam, chajja, facia, slab, lintel etc along PVC pipe complete all as specified and directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed.
UNITED BUILDERS
M/S Ali Trading Co
ANIMA ENTERPRISE
M/S Dey Construction
BHARAT CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .