CA NO. CWE SGNR-10 OF 2020-21 SPECIAL REPAIRS TO BUILDING NO. T-290, T-291 AND P-253 AT MILITARY STATION SRI GANGANAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engineer - in - Charge.

M&L glazed ceramic coloured tiles, (600x300)x7mm thick as on vertical surfaces like dados or skirting over 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick screed in CM 1:4 complete all as specified and directed by Engineer - in - Charge.

Demolition concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer - in - Charge.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base fininshing even and fair complete all as specified and directed by Engineer - in - Charge.

M&L for 25 mm thick cement concrete flooring type B-0, 1:2:4 (12.5 mm graded stone aggregate) finish even and fair complete all as specified and directed by Engineer - in - Charge.

M&L for Vitrified coloured light shade Ceramic tiles 10 mm thick (square / rectangular) polished area of each tiles not exc 0.36 sqm , over 15 mm thick screed bed CM 1:6,in floors etc set and jointed in neat cement slurry and pointed in white cement slurry and pointed in white cement or coloured cement to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

M&L for Vitrified coloured Ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exc 0.36 sqm , on vertical surfaces over and including 10mm rendering in CM 1:3 finished even and fair complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5sqm each complete all as specified and directed by Engineer - in - Charge.

Taking down and refixing shutters in same opening after eaing Resecuring of any description exc 1 sqm n exc 2.0 sqm each complete all as specified and directed by Engineer - in - Charge.

S & F for pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., size of frame 125x60mm complete all as specified and directed by Engineer - in - Charge.

M&L for Cement concrete 1:2:4 type B–0(12.5 mm graded stone aggregate) filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by Engineer - in - Charge.

S&F for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class hard wood complete all as specified and directed by Engineer - in - Charge.

S&F in repair 25 mm prelaminated particle board ,interior grade ,preliminated both sides with decorative choice laminations fixed with screws complete all as specified and directed by Engineer - in - Charge.

S&F for continous piano hinges mild steel bright finish or galvanised of 30 mm width complete all as specified and directed by Engineer - in - Charge.

S&F for 35 mm thick Factory made IInd class hard wood plain framed panelled shutters (Two Panels ) with lock rails and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS :1003 (Part -i) Klin Seasoned and chemically pressure treated complete all as specified and directed by Engineer - in - Charge.

S&F for 35 mm thick gauged skelton shutters open rebeted and prepared to receive gauze etc edges of framing plain , chamferedv or rounded fitted with cut and mitred beady for receving gauze etc of 35 mm thick and door for IInd class hard wood rail and style complete all as specified and directed by Engineer - in - Charge.

M&L for two coats of synthetic enamel paint on wooden surfaces (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of surface complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer - in - Charge.

M&L for two coats of synthetic enamel paint (ordinary tint) on steel surface over 10 cm width or girth, not otherwise described including preparation of new steel surface complete all as specified and directed by Engineer - in - Charge.

S & F for 150 mm long Brass handles, cast type, polished bright (Handles shall be of pattern / design as approved by GE) complete all as specified and directed by Engineer - in - Charge.

S&F for 200 mm Brass barrel tower bolts, but with barrel of extruded section complete all as specified and directed by Engineer - in - Charge.

S&F for Brass,sliding door bolt 300mm long with sand or die-cast brass hasp, staple (Bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed by Engineer - in - Charge.

S&F for mild steel butt hinges “medium weight” 100mm long cold rolled mild steel complete all as specified and directed by Engineer - in - Charge.

S & F for Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame complete all as specified and directed by Engineer - in - Charge.

S & F for 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.

S&F for 150 mm Fabricated Extruded aluminium alloy handles D- type complete all as specified and directed by Engineer - in - Charge.

S&F for 150 mm Fabricated Aluminium anodised barrel tower bolts complete all as specified and directed by Engineer - in - Charge.

S&F for 100 mm Butt hinges stainless steel complete all as specified and directed by Engineer - in - Charge.

S&F for Aluminium frame for window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shell be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and directed by Engineer - in - Charge.

S&F for Anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles two Nos. in each door, hinges, anodized aluminium snap beading, screws with powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and directed by Engineer - in - Charge.complete all as specified and directed by Engineer-in-Charge. Note:- Sheet glass will paid separately under respective item of BOQ

S&F for Anodised aluminium window and ventilator shutters,side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles two Nos. in each door, hinges, anodized aluminium snap beading, screws with powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and directed by Engineer - in - Charge. Note:- Sheet glass will paid separately under respective item of BOQ

S&F for Aluminum Grill any pattern fixed with Aluminum Frame complete all as specified and directed by Engineer - in - Charge. Note- Aluminum frame shall be Measured and paid seperately under respective item of BOQ

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed by Engineer - in - Charge.

S&F for 100 mm Aluminium anodised barrel tower bolts complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

M&L for 15mm thick rendering in CM 1:6 to brick / concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

M&L for 15mm thick rendering in CM 1:4 to brick / concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer - in - Charge.

Dismantling of brick work built in cement mortar of any description complete all as specified and directed by Engineer - in - Charge.

M&L for brick work with sub class 'B' Old size Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No.43 here-in-before but for except bricks complete all as specified and directed by Engineer - in - Charge.

M&L for preparation of new plastered wall surfaces, and chalk whiting as preparatory to distempering and applying two coats of distemper oil emulsion on complete all as specified and directed by Engineer - in - Charge.

M & L for complete removal of existing treatment on old plastered wall surfaces and applying two coats of oil bound distemper oil emulsion complete all as specified and directed by Engineer - in - Charge.

M & L for two coats of cement base paint over a coat of white wash on newly plastered surface of wall including preparation ofsurface complete all as specified and directed by Engineer - in - Charge.

M&L for two coats of cement base paint over old decorated plastered surface on walls, after complete removal of existing treatment including necessary preparation complete all as specified and directed by Engineer - in - Charge.

Demolition of stone slabs and tiles of any description or thickness in floor,aprons laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer - in - Charge.

M&L for 20 mm thick Black granite table moulded and polished machine cut in jambs,pillars ,skirting / dado, shelves etc laid over 15 mm thick cement mortar 1:3 screed set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing complete all as specified and directed by Engineer - in - Charge.

Dismentling of Asbestos cement (corrugated, semicorrugated etc) sheets as in roof coverings complete all as specified and directed by Engineer - in - Charge.

Dismentling timber scantling unframed work in fillets rails, posts, rafrers, purlins, etc under 40 sqcm in section complete all as specified and directed by Engineer - in - Charge.

S&F for MS work as in Stairs framed including strangers traders landing, balusters hand rails etc including cleats, brackets of grade Fe-290 (Gde -165) etc complete all as specified and directed by Engineer - in - Charge.

M&L for MS work as in roof trusses (framed ) trussed,purlins crane ganteries,rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance piece, cleats etc complete all as specified and directed by Engineer - in - Charge.

M&L for Pre-painted galvatume aluminium Zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall fixed self tapping screw as specified complete all as specified and directed by Engineer - in - Charge.

Dismentling wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed by Engineer - in - Charge.

Providing and fixing PVC false ceiling consisting of 600mmx600mmx6mm thick plain PVC sheet used as panel insert in a framework made using anodised aluminium T-section of sizes(25mmx25mmx1mm thick) in square pattern of grid sizes of (600mmx600mm). The aluminium framework is supported from the ceiling with the help of GI hook and GI wire/ 6mm MS rods of required sizes to maintain proper level etc. The aluminium framework is supported on the wall side with use of aluminium L section of size (25mmx25mmx2mm thick) angles etc as per manufacturers specifications and drawings complete all as specified and directed by Engineer - in - Charge PVC ceiling Make : Rajshree or equivalent of Sintex, Polycon Aluminium T and angle Make:- Hindalco, Indalco, Jindal

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.

S & F in repair brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in - Charge.

S&F in repair stainless steel curtain rod 25 mm dia with brackets knob rings(20 cm centre to centre) etc complete all as specified and directed by Engineer - in - Charge. Note : Approx size of each rod shall be 1.5meters

S&F in repairs, Brass CP mixer for mixing hot and cold water screwed down for iron pipe and fitted complete all as specified and directed by Engineer - in - Charge. Make: Jaquar-ARI-CHR-39051B, Prayag-9451 or equivalent as approved by GE

S & F in repairs bib taps with wall flange 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed by Engineer - in - Charge. Make : Parryware Cat part No-T4606A1, Prayag Cat part No-8506, Jaquar-CON-CHR-037KN or equivalent as approved by GE

S&F in repair Grating doom 100mm dia PTMT (minimum weight 25gms) complete all as specified and directed by Engineer - in - Charge.

S & F in repairs stop/Angle valves 15mm dia, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) serewed down, high pressure , with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer - in - Charge. Make : Parryware Cat part No-T4612A1, Prayag Cat part No-6418, Jaquar-CON-CHR-1080KN or equivalent as approved by GE

Taking up or down for 15 mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

S&F for steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 66 here-in-before but for fixing with new fittings complete all as specified and directed by Engineer - in - Charge.

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

S&F for steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 69 here-in-before but for fixing with new fittings complete all as specified and directed by Engineer - in - Charge.

M&L for mortice lock with two lever (vertical type) with brass body 100 mm long complete all as specified and directed by Engineer - in - Charge.

S&F for 40 mm dia brass polished cupboards knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and directed by Engineer - in - Charge.

S&F for health faucet 2 in 1 with 1.5 m tube and hook of same make complete all as specified and directed by Engineer - in - Charge. Make : Jaquar ALD CHR -583, Hindware 505223, Parryware or equivalent as approved by GE

Dismantling water tank capacity exc 500 ltrs N. exceeding 1000 complete all as specified and directed by Engineer - in - Charge.

S&F for rotational moulded polyethylene water storage tank 1000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge. Note : PVC tanks shall be ISI marked and having two layers

S&F in repair stainless steel toilet paper holder complete all as specified and directed by Engineer - in - Charge. Make : Prayag Cat part No-BA-88, Parryware-T6514A1, Jaquar-AKP-35751P or equivalent as approved by GE

S&F for 125 mm size over head shower swivel type chromium plated with arm complete all as specified and directed by Engineer - in - Charge. Make : ParrywareT9809A1, Jaquar-OHS-1789 or equivalent as approved by GE

S&F in repair door stoper and silencer rubber 50-70 mm dia complete all as specified and directed by Engineer - in - Charge.

M&L for reinforced cement concrete 1:2:4 Type B-1(Nominal mix) in beams, cantilevers, bressummers, lintels, roof Band etc complete all as specified and directed by Engineer - in - Charge.

M&L for Form work to sides and soffits of floor beams,tie beams,plinth beams and roof Beam rough finished flat surface etc complete all as specified and directed by Engineer - in - Charge.

M & L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 81 here-in-before but 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binder etc complete all as specified and directed by Engineer - in - Charge.

M&L for providing 75 mm thick cement concrete type 1:3:6 (20 mm graded) C-2 as in Plinth protection complete all as specified and directed by Engineer - in - Charge.

S&F in repair thin rim table top basin ,shape triangle of size 600x410x100 mm complete all as specified and directed by Engineer - in - Charge. Make : Jaquar LYS-WHT-38901N or equivalent as approved by GE

Fixing only in repair water closet (Padestal pattern) complete all as specified and directed by Engineer - in - Charge.

Dismantling brick tiles, single layer on roof complete all as specified and directed by Engineer - in - Charge.

Demolition of old mud phuska, removing rubbish of the premises cleaning surface and preparing to receive new mud plaster complete all as specified and directed by Engineer - in - Charge.

M&L for 40mm thick brick tiles laid on 15 mm thick CM 1:6 & joint grouted flush in CM (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 88 here-in-before but for except brick tiles complete all as specified and directed by Engineer - in - Charge.

M&L for applying bitumen 85/25 hot @ 1.2 Kg per sqm including cleaning surfaces, over 80mm thick average consolidated thick mud phuska on flat roofs incl 25mm thick mud plaster and 3 mm thick leeping plaster complete all as specified and directed by Engineer - in - Charge.

M&L for 80mm thick average consolidated thickness mud puska on flat roofs including 25mm thick mud plaster complete all as specified and directed by Engineer - in - Charge.

M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base 20 mm thick in cement mortar 1:4 laid and jointed withgrey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including Mirror Polishing finishing complete all as specified and directed by Engineer - in - Charge.

S&F in repairs 5mm thick 3 tier Glass Shelf Glass fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed by Engineer - in - Charge.

SF in repair towel ring brass glossy finish complete all as specified and directed by Engineer - in - Charge. Make : Prayag Cat No-BA-31, ParrywareT6502A1, Jaquar-ACN-1121BN or equivalent as approved by GE

SF in repair soap dish brass glossy finish complete all as specified and directed by Engineer - in - Charge. Make : Prayag Cat No-BA -5S, Parryware T6403A1, Jaquar-ACN-1131N or equivalent as approved by GE

Supply only solo single piece WC with UF soft close seat cover, hinges, fixing accessories, accessories set and cistern fitting size - 300x725x735mm, 'S' trap 300mm complete all as specified and directed by Engineer-in-Charge. Make : Jaquar SLS-WHT-6851S300PP or equivalent as approved by GE

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in - Charge.

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and thickness for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer - in - Charge. Make of cable -Havells / Anchor Make of conduit pipe:-AKG/Plaza/Suprem

All as per Srl item No -99 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No -99 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 99 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

All as Srl item No. 99 here-in-before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in - Charge.

All as Srl item No. 99 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.

S & F for modular switch 5/6 Amps single pole one way, one module complete all as specified and directed by Engineer - in - Charge.

S & F for modular switch socket combination 5 pin, type 5/6 Amps 5 in 1 flush type complete all as specified and directed by Engineer - in - Charge.

S & F for modular switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F for modular switch 5/6 Amps single pole two ways complete all as specified and directed by Engineer - in - Charge.

S & F for modular socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S&F for modular bell push 5 Amp complete all as specified and directed by Engineer - in - Charge.

S & F for modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200 / 1400mm sweep complete all as specified and directed by Engineer - in - Charge.

S&F for Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.

S & F for ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

Supply and fix in repair Industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed by Engineer - in - Charge.

S & F in repair existing light fitting with LED batten with aliminium housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge. Make : Havells cat part No: LUMILINEPLUSBS20WLED865SPCSS or equivalent as approved by GE

S&F in repair security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge. Make : Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent as approved by GE

S&F in repair decorative wall light fixture made up of poly carbonate suitable for 10 watt LED lamp.complete all as specified and directed by Engineer - in - Charge. Make- havells cat part no: LHFOFWE1TZ1W012 or equivalent as approved by GE

S & F in repair Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp complete all as specified and directed by Engineer - in - Charge. Make : Havells cat part no : HEXAFT10WLED857SSYMBOPC or equivalent as approved by GE

S & F in repair compact & decorative energy efficient LED mirror light fitting with antiglare diffuser and decorative end caps suitable for 1X10 watt fitting 2 ft version including LED lamp 10 watt complete all as specified and directed by Engineer - in - Charge. Make : Havells cat part no LUMILINEPLUSBS10WLED865SPCSS or equivalent as approved by GE

S&F in repair recess mounting 2 X 2 feet 36 watt LED luminaire with powder coated CRCA housing with LEDs,seamless front frame with high transmission acrylic cover and fixed electronic driver (surge protector) complete all as specified and directed by Engineer - in - Charge. Make : Crompton cat part no :LCTLRNE-36-FO-CDL or equivalent as approved by GE

S & F for angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S&F for LED lamp 9W for angle holder complete all as specified and directed by Engineer - in - Charge.

S & F in repair of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FR/FRLS stranded copper conductor drawn in and including steel dia 25mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge. Note : Two runs of 6 Sqmm single core cable and one run of 6 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.

S & F in repair sheet metal enclosure for double door BDs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge. Make - Havells / Legrand / Indo Asian or equivalent as approved by GE

S&F in repair Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 Volt ISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N1 Frame upto 125A ,Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer - in - Charge. Make - Havells / Legrand / Indo Asian or equivalent as approved by GE

S&F in repair MCCB 40 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. Make - Havells / Legrand / Indo Asian or equivalent as approved by GE

S & F in repair MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. Make - Havells / Legrand / Indo Asian or equivalent as approved by GE

S & F in repair MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. Make - Havells / Legrand / Indo Asian or equivalent as approved by GE

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on complete all as specified and directed by Engineer-in-Charge.

Dismantling and refixing of ceiling fans of any size including providing fan hooks clamps complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not ecxceedinf 1.5 mtr depth for laying of cables complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engineer-in-Charge.

Removal of Excavated material n exceeding 50 mtr and depositing where directed complete all as specified and directed by Engineer-in-Charge.

Supply and filling in Sand for Cable protection complete all as specified and directed by Engineer-in-Charge.

Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning in replacement of 25 Sqmm x4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning in replacement of 16 Sqmm x2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engineer-in-Charge. ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 34,890.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 37 & 38(R) (Schedule of Credit) of Tender document

Gyan Chand Marothia Engineer Contractor And Suppliers

J and P CONTRACTOR

ram rattan dass aggarwal

KHANNA CONSTRUCTIONS