CERTAIN REPAIRS TO MISC ITEMS LIKE DRAIN, FENCING COMPOUND WALL ETC AT AFS AMRITSAR

Amount

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.

M&L PCC 1:2:4 Type B0 1:2:4 using 12.5mm graded crushed stone aggr as in louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

Dismantling posts or struts (wood,steel or RCC) any section,in natural ground including taking out embedded portion and making good distrubed ground complete all as specified and directed.

Dismantling fencing wire mesh or any type as specified and directed.

Excavation in post holes in soft loose soil (or similar holes ) each n.exc 0.50 cum,getting out,returning,filling in and ramming earth or broken rubble and removing surplus soil all as specified and directed.

M& L PCC type D-2 1 :4 : 8 (40mm graded agg) in foundation, filling and mass concrete complete all as specified and directed.

S&F mild steel work as in angle iron post and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed.

M&L11 to 15 mm dia for mild steel screw bolts (machine made) with hexagonal or square heads at one end and nut and bolts n. exc 5 cm long all as specified and directed.

Supply and fixing in repairs Concertina coil having 610mm dia stretch length of 6m long of each coil including fastener clip steelhog rings, laying over Y sec between inner & outer fencing ,including fixing with GI WIRE ,CLIPS TO CHAIN link fencing etc complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, at crossings with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed.

Restraining & resecuring including making good staples etc in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, at crossings with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed.

M&LCement concrete Type BI (1:2:4) 20 mm graded aggregate for coping all as specified and directed.

M&L for broken glass coping in cement mortar 1:3 on top of walls all as specified and directed.

S&F chain link MS galvanised fencing made of 3.98 to 4.00mm thick (08 Guage) galvanised wire and the length of side of mesh of 50 to 56.50mm (Gap) weight of chain link fence (not exc 4 Kg/Sqm) complete fixed to the fencing posts as indicated or as directed by Engr-in Charge.

Demolition of brick work built in cement mortar including all quoins,arches pillars etc all as specified and directed by Engr-in-Ch.

M&L for Brick work built in cement mortar 1:6 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed .

M&L for Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 without using extra cement complete all as specified and directed.

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

M&L for 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrte surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.

M&L for 15mm thick rendering in cement mortar(1:6) on other than fair face of brick work or concrete surfaces finished surface even and fair complete all as specified and as directed by EIC.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for chajja, roof slab etc complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in precast manhole cover slab,chullah hoods, chajjas and other similar articles with plain faces including necessary form work complete all as specified and as directed.

M&L Cement concrete 1:2:4 type B 2 in surface channels and Drain.

M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips.

Prepration of new plastered surfaces of walls, pillars, cornices and applying two coat cement base paint over a coat of cement primer including prepration of surface complete all as specified and direceted.

Prepration of new plastered surfaces of walls, pillars, cornices and applying applying two coat of exterior water emulsion paint (Appex) all as specified and direceted by Engr-In-Charge.

Preparation of old platered or unplastered old decorated surfaces of wall by brooming down with steel brushing,scraping down smoke soot's moulds moss and efflorescent salts trading oil greasy sport etc and applying two coat of white wash on wall complete all as specified.

Preparation of new plastered surfaces of wall by brooming down with steel brushing,scraping down smoke soot's moulds moss and efflorescent salts trading oil greasy sport etc and applying two coat of white wash on wall complete all as specified.

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 75 mm thick PCC type B-1 1:2:4 (Using 20mm graded stone aggregate as in floor finishing complete all as specified and directed.

M&L 25MM sand filling under floor incl watering and consolidation complete all as specified.

M& L PCC type C2 1:3:6 (40mm graded agg) as in sub base of interlocking tiles all as specified and directed.

M&L Machine pressed precase concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickess M-35 grade with grey cement and pigment complete all as specified and directed.

Factory Made machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade including minimum 25 mm thick sand cushning complete all as specified and directed

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

Precast chequered cement concrete tiles 30cm x 30cm x 22 to 25 mm thick with grey ecment and pigment set, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 20 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as in roof kerb or mud storps, rounded or champfered on edges of road side interlocking ,stops including necessary formwork complete all as specified and directed.

M&L Pre-cast concrete soild block masonry exc.10 cm in width built in PCC (1:2:4) type B-1 (using 20mm graded stone agg) and set in CM 1:4 as in kerv stone exc 10cm in width complete all as specified and directed.

Applying two coat of exterior water emulsion paint over a coat of primer on newly laid kerb stone surface complete all as specified and directed by Engineer-in-charge.

Dismantling of plain/corrugated steel sheeting any gauge or thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Joist, channel, angle or tee section, fixed independently, without connecting plates, etc, (out to ordinary lengths i.e within 20 mm of length indicated ) Fe-410 W (Gde E-250 Qlty B) complete all as specified and directed.

Rolled mild steel Gde Fe-410-S in Roof trusses (framed), trussed, purlins crane gantries, rails & fastenings & heavy brackets framimg (Beam, tee, angle, channel or flat section) including distance pieces, cleats etc complete all as specified and directed.

S&F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws as specified.

M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

M/S SIMRAN WALIA ENTERPRISES