Provn of tiling, upgradation of existing 02 x MI Room and waiting area (size 16 x 14 Ft) near helipad at Mil Stn Abohar

Amount

SCHEDULE 'A' SECTION I (B&R Portion)

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations etc or manholes, cesspits, pipes and cables etc. not exc 10 Sqm on plan and getting out in soft / loose soil all as specified and directed by Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers of soft / loose soil not exceeding 25cm thick all as specified and directed by Engineer - in - Charge.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engineer - in - Charge.

M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed by Engineer - in - Charge

M & L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete all as specified and directed by Engineer - in - Charge.

M & L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete all as specified and directed by Engineer - in - Charge.

Form work to sides and soffits of floor or roof beams, lintels cantilevers, shelves including supports, over hangs and the like for rough finished surfaces complete all as specified and directed by Engineer – in – Charge.

M & L form work to soffits of suspended slabs such as roof slab and similar work not exceeding 200mm thick for rough finished surfaces of concrete all as specified and directed by Engineer - in - Charge .

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces of concrete all as specified and directed by Engineer - in - Charge.

Form work to chullah hoods, chajjas, troughs and similar items including edges with rough finished surface of concrete all as specified and directed by Engineer - in - Charge.

M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed by Engineer - in - Charge .

All as per Srl item No. 11 here in before but 5mm and over for as in stirrups, spacers and binders all as specified and directed by Engineer - in - Charge.

M & L Reinforced cement concrete M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed.

M & L Reinforced cement concrete M-25 design mix as in columns, pillars, piers, posts and struts all as specified and directed by Engineer - in - Charge.

M & L Reinforced cement concrete M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5mtr clear span etc complete all as specified and directed.

M & L Reinforced cement concrete M-25 design mix as in slabs supported on walls, beams, columns and in shelves, the like all as specified and directed by Engineer - in - Charge .

M & L Reinforced cement concrete M-25 design mix as in chajjas, fins, fascias, louvers, parapets and railing etc and the like all as specified and directed by Engineer - in - Charge.

M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .

Spreading and levelling of earth in layers not exceeding 25cm thick and well ramming including watering as required all as specified and directed by Engineer - in - Charge.

M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge.

M & L for glazed ceramic coloured tiles 7mm thick 350x 250mm/ 450X 350mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:4) complete all as specified and directed by Engineer - in - Charge.

M & L for non skid ceramic coloured tiles with matt finish, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:6) complete all as specified and directed by Engineer - in - Charge.

M & L for Vitrified ceramic Dark shade/double charged/ultra charged with matt finish, 10 mm thick ( square/ rectangular ) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:6) complete all as specified and directed by Engineer - in - Charge.

Ditto all as above but as in skirting over 10 mm cement mortar backing ( 1:3).

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

M&L rendering 10mm thick in CM 1:6 on fair face of brick or concrete surface,finished even and smooth without using extra cement complete .

M & L 5mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .

M & L two coats of distemper oil emulsion over a coat of 3mm thick wall putty preparatory to distempering, on newly plastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge.

M & L three coats of white wash including preparing new plastered or unplastered surfaces of ceiling complete all as specified and directed by Engineer - in - Charge.

Providing & applying Rising damp proof coating system with single component ready to use damp-proof coating Roff Hydamp: 1.SURFACE PREPARATION:Thoroughly brush and clean all laitance,loose particles such as dirt,grease,mortar droppings,release agents,efflorescence,bird droppings etc. all large voids or hollow portions must be removed and replastered.Non-moving cracks having width upto 5 mm must be filled with polymer based crack filler. 2.APPLICATION: Apply the first coat of Hydamp with paintbrush directly on the prepared surfaces.Allow to dry for a minimum 2-3 hrs.Apply one part of Roff Hydamp and 2 parts of OPC white cement and make the putty,apply putty on the entire surface area.Allow it to dry for atleast 3-4 hours.Apply the final coat of Roff Hydamp on the entire surface.

M & L applying two coat of cement base paint on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in – Charge

Providing and applying microfibre reinforced UV resistant Acrylic polymer coating three coats having solid contents 69% polymer content 35% & tensile strength 2.6 N/mm2 of Dr. Fixit Newcoat/ stat /Parex or equivalent with a paint brush over existing roof surface after removal of all loose material, lime dust etc. with wire brushes, coir brushes from roof surface to get absolutely cleaned surface free of foreign contaimnant filling of cracks wherever found with polymer based mortar, and after repairing the surface apply primer coat with Dr. Fixit Primeseal. Polyester reinforced fiber net laid on the surface after the first coat and all the joints of bricks is repaired by polymer based mortar. Undulation on the surface repair before executing the water proofing treatment complete all as specified and directed by Engineer in Charge. (work shall only be executed through specialized agency / applicator approved by GE).

M & L for broken bricks hard core of gauge not exceeding 63mm, deposited, spread levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed by Engineer - in - Charge.

M & L for 75mm thick cement concrete type C-1 (1:3:6) using 20mm graded stone aggregate as in plinth protection etc finished even and smooth without using extra cement all as specified and directed by Engineer - in - Charge.

Supply only Integral waterproofing compound all as specified and directed by Engineer - in - Charge.

S & F MS butt hinges, medium weight cold rolled 100mm size all as specified and directed by Engineer - in - Charge .

S&F "fiberways" brand fiber glass reinforced plastic (FRB) Door frame of three legged of cross section 90x45 mm size single nrebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulded with two resistant grade unsatratedpolyster plain and chapped mat d or frame laminate shall be 2mm thick and shall be filled with subbish wooden block in all two three legs . the frame shall be covered with fibre glass from all side. MS stay shall be provided at the bottem to steady the frame Make- "Fiber ways, Rajshree, sintex, polycon, AS per sample MAP PHASE -II.

S&F "fiberways" brand 30mm thick glass fiber reinforced plastic (FRB) panelled door shutter of required colour are approver brand and manufacture made with fire resistance grade unsatratedpolyster plain moulded to 3mm thick fiber laminate for foming hollow ralliuded styles with wooden frame and suitable blocks of sessoned wood inside at required place for fixing of fiber-cast monolithitically with 5mm thick FRB laminated for panels and conforming to IS-4858-2000 Make- "Fiber ways, Rajshree, sintex, polycon, AS per sample MAP PHASE -II.

S & F aluminium handle cast type anodised, 150mm long all as specified and directed by Engineer - in - Charge.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed by Engineer - in - Charge .

S&F door closer hydraulically regulated, aluminium (Die cast) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width complete all as specified and as directed by Engineer-in-Charge.

S&F PVC high or low level cistern of 10 litres capacity including 32mm dia. Flush pipe and internal fittings complete all as specified.

S & F ball brass valve 20mm bore dia high pressure with polythene float and fly nuts complete screwed with iron pipe or brass ferrule and fixed all as specified and directed by Engineer - in - Charge .

S & F gunmetal globe or gate valve with iron wheel head, screwed both ends for iron pipes 20mm bore complete all as specified and directed by Engineer – in – Charge.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.

M & L for 100mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge.

M & L machine pressed precast concrete interlocking paver blocks any size and shape factory casted with grey cement and pigment and conforming to IS 15658-2006 of 80mm thickness, M-30 Grade and laid over and including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed by Engineer - in - Charge.

M & L Sand filling under floors or in foundations including watering and consolidation all as specified and directed by Engineer - in - Charge.

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified .

M&L Continuous brick edging using old size burnt clay bricks of sub class B; with width equal to width of brick laid dry on end vertically (including necessary earthwork & embedding bricks in the ground) all as specified and directed by Engineer - in - Charge.

S&F anodized aluminium frame with Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc., with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.

S & F drapery curtain rod fancy type 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge .Make :-Vista or equivalent make as approved by GE.

S & F stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste fittings, waste pipe, cast iron cantilever brackets, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm with waste pipe PVC 40mm dia all as specified and directed by Engineer-in-Charge.

S&F Stainless steel plate rack of size 750mm x 600mm, made out of 1mm thick stainless steel of sheet of 1st quality complete all as specified and directed by Engineer -in -charge.Make:Anupam international model No KPR-311 or Equivalent make and model approved by GE.

S&F Anodised aluminium door shutters with Powder Coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge.

S&F anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.

S & F powder coated aluminium sliding window three track with frame & two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium powder coated section aluminium cleat ,PVC track ,bearing, handle lock,rubber beading etc complete fittings as approved. Note:- Size of aluminium section shall be under- (i) Three track top and vertical - Jindal main-2010 section No 20621 or equivalent as approved by GE. (ii) Three track bottom - Jindal main - 2010 section No 20620 or equivalent as approved by GE. (iii)Shutter vertical section -Jindal main -2010 section 20604 or equivalent as approved by GE . (iv)Shutter top and bottom - Jindal main -2010 Section 20604 or equivalent as approved by GE. (v)Shutter vertical middle (interlock) - Jindal Main -2010 Section 20605 or equivalent as approved by GE.

S&F anodised aluminium grill of daimond size 100x100mm of dia 6mm including necessary joining cleats , anodised aluminium snap beading screws , complete all as specified .

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .

S & F figured glass 4mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all as specified and directed by Engineer - in - Charge .

S&F for wire netting of stainless steel wire 0.91mm dia., size of wire mesh 12mm ,fixed with tinned tacks of stainless steel wire staples.

S & F Aluminium anodised barrel tower bolt of extruded section 100mm long all as specified and directed by Engineer - in - Charge .

S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work for water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge.

S&F in repairVitreous China wash down water closet pan (pedestal pattern), white (excludin fixing bolts, flushing cistern and flush pipe) with PVC sheet cover & 'P' OR 'S' trap.

S & F jet spray assembly with all fittings in EWC complete all as speciifed and as directed by Engineer-in-Charge

S & F health faucet with tube & wall hook. Make : Jaquar.

S & F Vitreous china Oval type Counter wash hand basin screwed shank fly nut flange end including cutting for and pinning in granite slab of hole including 32 mm dia chromium plated waste coupling and bottle trap all as specified .(MAKE-Hindware,Parryware,Cera or equivalent )

S&F Granite work 20 mm thick (table rubbed and polished) in steps, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite.

S&F vitreous china Half stall urinals flat back white minimum with grating and union for discharge pipe , providing & fixing plugs, bedding urinal against wall in CM 1:2 , securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with nbrackets, flush pipe, grating and union for discharge pipe complete all as specified.

S & F rotational moulded polythene water storage tanks, white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .

Rainfall shower round shape multiflow cleaning system make -ESSESS Cat Part No. RF-209

Wall mounted shower arm casted light body Square shape with flange make -ESSESS Cat Part No. SA-106N

Towel Bracket chromium plated brass 61cm size make -ESSESS Cat Part No.-AC-308.

Towel ring round with round flange make -ESSESS Cat Part No. AC-702.

Acrylic shelf size 46 cmx13 cm make -ESSESS Cat Part No.-AC-307.

Corner glass shelf (with bracket) make -Jaquar Cat Part No.-ACN-1173 .

S & F soap dish fixed as chromium plated.Make -ESSESS AC-103 .

S&F PVC bathroom cabinet mirror 450 x 350 mm complete all as specified and directed by Engr-in-charge.Make:-Prayag cat part no551/polytuf/shakti/pearl as approved by GE.

S & F 15mm bore stop valve, fancy type, chromium plated cast copper alloy screwed down, high pressure, with long shank and cup (concealed type) with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge.

S & F 15mm bore stop valve, cast copper alloy screwed down, fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge.

S&F bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed by Engineer – in – Charge .

S&F Pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engineer – in – Charge .

S & F 15mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .

S & F 20mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .

Cast copper alloy sink cock swan neck type, chromium plated, with swinging spout screwed for iron pipe or for union and fixed for 15mm bore of pipe complete all as specified

S & F PVC pipes (SWR) single socketed with rubber ring joints 110mm dia fixed to wall complete all as specified and directed by Engineer - in - Charge .

S & F PVC pipes (SWR) single socketed with rubber ring joints 75mm dia fixed to wall complete all as specified and directed by Engineer - in - Charge .

S&F PVC ( SWR) bends any radius bore of 110 mm all as specified and directed by Engineer - in - Charge

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm diameter of outlet all as specified and directed by Engineer - in - Charge

S&F PVC (SWR) vent cowl bore of 110 mm all as specified and directed by Engineer - in - Charge

S&F PVC (SWR) 110mm bore junction single (single T) equal or unequal with access door all as specified and directed by Engineer - in - Charge

S & F PVC pipes (SWR) single socketed with rubber ring joints 110mm dia laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge .

S & F PVC pipes (SWR) single socketed with rubber ring joints 75mm dia laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge .

S & F PVC connection for hot water, threaded type, 15mm bore with brass nuts, of length 450mm all as specified and directed by Engineer - in – Charge.

M & L 150mm dia (internal) SGSW pipes grade ‘A’ laid in trenches and jointed all as specified and directed by Engineer - in - Charge.

PCC (1:4:8) type D-2 using 40mm graded stone aggregate , concrete bed to drains laid to falls in trenches in any depath inl. Packing under and haunching against the sides of SGSW pipes 150mm bore after the pipes have been laid jointed and tested all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benches for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm internal dia for pipe all as specified and directed by Engineer - in - Charge.

Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .

Demolition of cement concrete (reinforced) in roof , floors (other than ground floor ), beams, staircase, landing,chajjas and similar suspepnded work

Demolition of brick work built in cement mortar all as specified and directed by Engineer - in - Charge.

M&L Brick work with sub class 'B' old size burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .

All as above but except bricks all as specified .

M & L brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engineer - in - Charge.

Reinforced cement concrete M-25 Nominal mix B1 (1:2:4), type using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5 metre span all as specified and directed. (form work & reinforcement measured separately).

Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in – Charge.

M&L for joint free Non skid ceramic coloured tile 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc.over and including 15mm thick screed and bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or colour cement to match with the existing surface etc all as specified.

Ditto all as above but as in skirting over 10 mm cement mortar backing ( 1:3).

M & L two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L providing two coats of synthetic enamel paint over new wooden surface including preparation of surface with primer all as specified .

M&L for preperation of old wooden surface and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified .

M&L for preperation of old steel surface and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified .

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed by Engineer - in – Charge.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed by Engineer - in - Charge.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm each & refixing in same opening all as specified and directed by Engineer - in - Charge .

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm each all as specified and directed by Engineer - in - Charge .

S & F factory made 35mm thick plain framed panelled shutters, (two panels) with panels of 9mm thick B.W.P. commercial plywood fixed to timber frame of 2nd class hard wood rails and styles as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engineer – in – Charge .

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24 (a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge .

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .

Dismantling boarding any description, fixed in any position with nails all as specified and directed by Engineer - in - Charge.

M & L pre-laminated particle board, 18/19mm thick interior grade, pre-laminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed by Engineer - in - Charge.

S & F 40mm dia cup board knobs fixed with nuts, screws and washer of brass bright finished complete all as specified and as directed by Engineer-in-Charge.

S & F 100mm extuded,brass handles,fabricated type polished for cabinet shutters complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified.

Ball catches 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed by Engineer-in-Charge.

S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, size of frame 105X60mm , complete all as specified and directed by Engineer - in – Charge .

S & F pressed steel door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, size of frame 125 x 60mm, complete all as specified and directed by Engineer - in - Charge.

M&L Cement concrete 1:3:6 type C-1 for filling of pressed steel fram and hold fast blocks etc all as specified .

S & F Aluminium anodised barrel tower bolt of extruded section 200mm long all as specified and directed by Engineer - in - Charge .

S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm all as specified and directed by Engineer - in - Charge .

S & F mild steel, 300mm, ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer - in - Charge.

S & F small fittings such as door stops and like, including all necessary labours articles not exceeding 200 Cucm each of 2nd class hard wood all as specified and directed by Engineer - in - Charge.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engineer - in - Charge.

Dismantling water tanks of capacity exceeding 500 litres and not exceeding 1000 litres all as specified and directed by Engineer - in - Charge.

S & F rotational moulded polythene water storage tanks, white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge .

Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Fixing only tubes any grade 15mm bore to walls and ceiling or in floors etc including provision of new fittings as required (Serviceable galvanised tubes retrieved from respective items shall be laid under these items) all as specified and directed by Engineer - in - Charge .

Taking down steel tubing 20mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Fixing only tubes any grade 20mm bore to walls and ceiling or in floors etc including provision of new fittings as required (Serviceable galvanised tubes retrieved from respective items shall be laid under these items) all as specified and directed by Engineer - in - Charge .

M&L for preparation of newly plastered and unplastered surfaces of wall by applying two coats of interior grade wall putty( 1mm thick of each coat) manually and making it smooth with sand paper by mechanical method i.e. with hand electric grinder and then applying two coat of weather coat emulsion over one coat of primer manually complete all as specified and directed by Engr-in-charge.

M&L for preparation of Old plastered external surfaces of wall by complete removing old treatment and applying two coats of interior grade wall putty( 1mm thick of each coat) manually and making it smooth with sand paper by mechanical method i.e. with hand electric grinder and then applying two coat of weather coat emulsion over one coat of primer including all as specified by mechanical method and directed by Engr-in-charge.

M&L for preparation of newly plastered and unplastered surfaces of wall by applying two coats of interior grade wall putty( 1mm thick of each coat) and making it smooth with sand paper by mechanical method i.e. with hand electric grinder and then applying two coat of oil bound distemper over one coat of cement primer including all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered surfaces of wall by complete removing old treatment and applying two coats of interior grade wall putty( 1mm thick of each coat) and making it smooth with sand paper by mechanical method i.e. with hand electric grinder and then applying two coat of oil bound distemper over one coat of cement primer including all as specified and directed by Engr-in-charge.

S & F PVC butt hinges, medium weight 100 mm size fixed with steel screw all as specified.

S & F tower bolt 150 mm of PTMT all as specified.

S & F door handle D type 150 mm of PTMT all as specified.

Overhead shower round shape multiflow cleaning system make -ESSESS Cat Part No. OH-201

Wall mounted shower arm casted light body Square shape with flange make -ESSESS Cat Part No. SA-101

S&F in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.Make ESS ESS cat part No.- C-211A

S&F Sink mixer with swinging spout(wall mounted model)Chromium plated brass with connection and nut complete all as specified and directed by Engr-in-charge. Make- ESSESS Cat part No DE-12 or equivalent to Parryware/nirali/prayag

S&F brass chromium plated wall mixer with Provision for overhead shower with 140 mm long bend pipe and flange for mixing hot& cold water screwed down for iron pipe and fixed as directed by Engr-in- charge.Make:- ESS ESS cat part No.- C-216D

Taking down CI/AC/PVC soil waste and vent pipe any radius including all fittings complete.

SCHEDULE 'A' SECTION-II (E&M PORTION)

M&L point wiring (CONCEALED) for using 1.5 sqmm nominal cross sectional area copper conductor mutimultistranded ,PVC insulated unsheathed , FRLS cables in and including using PVC conduits not les than 20 mm dia and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multi-multistranded copper conductor , FRLS, green PVC insulated unsheathed earth wire and connecting to earth dolly using color code as per IS and making good all disturbed work to match the existing for One light/fan/bell point controlled by one 5 Amps one way switch and all as specified and brass screws, washers etc. complete all as specified.

All as per Item No. 157 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 157 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

Description all as per item No 157 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

Description all as per item No 157 here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.

M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 1.5 Sqmm, 1100V grade in Existing concealed conduit, and one run PVC FRLS insulated unsheathed copper conductor of size 1.5 Sqmm as earth continuity wire and connected to common earth dolly using color code as per IS and all as specified with copper lugs/timbles inserted in existing MS boards/boxes complete heavy duty for housing switches, , regulators, bell push etc, and making good all disturbed work to match the existing for One light / fan point controlled by one way piano switch 5 Amp. and complete all as specified and directed.

All as per Item No. 162 here in before but for One three pins 5 Amps switch socket outlet point on independent board

All as per Item No. 162 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches

All as per Item No. 162 here in before but for One light point controlled by two 2-way switches of 5 amps

All as per Item No. 162 here in before but for One bell point controlled byh one bell push

M & L point wiring with PVC FRLS insulated unsheathed multistranded copper conductor of size 2.5 sqmm, 1100V grade in existing concealed conduit, for 6 pin 6/16 Amps switch socket combination on independent board with PVC FRLS insulated unsheathed copper conductor of size 2.5 Sqmm using as earth wire continuity and connected to common earth dolly using color code as per IS and making good all disturbed work to match the existing and all as specified complete existing MS boards for switches all as specified & directed.

M & L for point wiring with Television co-axial cable in and including concealed PVC conduit (25 mm dia) and conduit accessories and metal flush box of one module with cover fixed with screw and cap washers for Television ponint and making good all disturbed work to match the existing and all as specified and directed (Make: Finolex/NICO/KDK for Television cable and make- Presto plast/Plaza for conduit)

M&L for modular type TV socket (Make: Carbtree, Cat No: ACAKTOW000)

M & L for point wiring with Telephone cables in and including concealed PVC conduit (20 mm dia) and conduit accessories and metal flush box of one module with coner fixed with screw and cap washers for Telephone point and making good all disturbed work to match the existing and all as specified and directed (Make: Finolex/NICO/KDK for Television cable and make- Presto plast/Plaza for conduit)

M&L for modular type Telephone socket (Make: Carbtree, Cat No: ACAKTOW000)

S & F switch piano ,flush type single pole, one way 5 amp, all as specifed and directed by Engr-in-charge.

S & F switch piano flush type single pole one way 15/16 Amp complete all as specified and directed by Engr-in-charge

Supply and fix in replacement of socket outlet 2 in 1, 3 pin 5 Amps complete.

Supply and fix in replacement of socket outlet 2 in 1, 3 pin 5 Amps and 15 Amps complete.

M & L for celling rose 3 pin/pvc/ polycarbonate insulated body complete all as specified and as directed.

M&L for LED tube light fitting of LED T5 tube lights (6500K) environomental freiendly energy efficient of 18/20 Watt LED including electric connection with PVC copper flexible twin core cable, 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Make:Syska SSK-SQ2001 20W or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Polycab as recommended by Engr-Incharge and approved by GE.

M&L for LED building street light luminaire of capacity 20 Watt with pressure die-cast housing with individual LEDs as light source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK 07 Make: Bajaj BRLEPLED 20W LED V2 or equivalent in Havlls/Crompton Greaves/ Philips/Wipro/Syska as approved by GE.

M&L for LED Batten with LED tube light integrated LED channel of capacity 10 Watt white colour complete all as specified and directed by Engr-In-charge. Make: Bajaj BCLSB 10WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska/Polycab as recommended by Engr-Incharge and approved by GE.

M&L for Skylux LED efficient LED surface 2'x2' luminaire & glare free soft illumination of capacity 36Watt LED white colour complete all as specified and directed by Engr-In-charge. Make:Bajaj BZSSQL 36W LED WH or equvalent of Havells/Crompton Greaves/ Philips/Wipro/Syska as recommended by Engr-Incharge and approved by GE.

S&F Exhaust fans (Heavy duty) 300 mm sweep turbo force 150 Watt (Grey) 230/240 volts single phase with self closing louvers off mode protection against birds etc and provision of cutting ofr walls and necessary plastering and making good the disturbed surface to match with existing complete all as specified. Make: Havells Turbo force or equvalent of CG/Luminous

S & F BLDC (brussless direct current) Motor Ceiling fan 1200 mm sweep 5 star rating , single phase 240 volts, power consumption 26 Watt to 32 Watt on turbo mode with remote control, 220 CUM/Min, 350 RPM , single phase 240 volts warranty 2 years on product complete and accessories. Make: Atomberg Gorilla/Havells Efficiencia Neo/Crompton/ White or equvalent of CG/Luminous/Orient

S & F Geyser storage type, electric driven of capacity 25 Ltrs 5 star rating, with 8 bar pressure withh standing ,rust proof, rust proof fire retardant cable adj thermostat anti corrosion protective device inner tank mild steell wiith glass lined coating including PVC connections and grouting of bolts with nut of suitable size including cement work for make good the disturbed surface etc complete all as specified and as directed .Make:: Bajaj cat No Caldia or equavalent in CG, Havells,

Supply and fixing Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make-Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells Schneider/C&S)

Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser TPN DB having facility to fix MCCB in incomer upto 125Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-54 protection Isolated Neutral bar,door earthing,cement spill ptorector and blanking plates including making good disturbed surfaces complete all as specified and directed. make- Legrand/L&T Hager/C&S/INDO KOPP/Indo Asian/Standard/Havells

S & F in sheet metal enclosures for DBs double door type when MCBs to be used single pole & nuteral 8 ways s all as specified and directed by Engg-in-Charge.

S&F MCB SPN 40-63 Amps, 240 Volts complete all as specified.

S&F MCB SP 6 to 40 Amps, 240 Volts complete all as specified.

Supply and fixing MCCB TPN 125 Amps 415 Volts of braking capacity 36 KA (Adjustable Thermal and Adjustable Magnetic Release Setting) complete taking down old unserviceable one and making necessary connections as existing and cleaning the terminals with CTC solutions complete all as specified and directed. Make : Havells/Legrand/IndoAsian/Schneider/HPL/Standard

M&L for submain wiring comprising single core ,4 Runs of 10 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings not less than 25 mm dia complete, including provision of 2x6 sqmm nominal cross sectional area multimultistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

M&L for submain wiring comprising single core ,4 Runs of 6 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings not less than 25 mmdia complete, including provision of 2x4 sqmm nominal cross sectional area multimultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS and specified and making good all disturbed work to match the existing complete incl taking down old UNSV sub main all as specified. ( Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

S & F submain wiring with two single core cables PVC FRLS insulated unsheathed 6 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC insulated 6.0 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer-in-Charge. Note : PVC cables two single core and one single core of sizes as mentioned will considered as one unit.

M & L cutting chases, pinning in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge .

M & L lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED Lamp of 12 Watt complete, Make- Anchor/SSK/CONA

Supply and lay GI Pipe medium class including fittings of size 25 mm dia

Supply and fix stop valve screwed of size 40 mm dia. Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Supply and fix stop valve screwed of size 25 mm dia. Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

Supplying, laying, jointing and testing XLPE PVC insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 50 sqmm 3.5 core conforming to IS- 1554 laid in trenches/ ducts/ along poles/ through pipes

Excavation in trenches not exceeding 1.5 mtr depth width and not exceeding 1.5m depth for laying under ground cable in loose/soft soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm.

Removal of surplus soil obtained from excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

M&L for sand cushioning for protection of PVC cable with screen wash river sand and punning to proper required cover.

M&L for PCC preparation including cutting up to 45 cm width and depth of the road/hard standing and making good disturbed surfaces by using PCC type C2(1:3:6) by using 40mm graded stone aggregate for the fixing the pipe/laying cables complete all as directed by the Engr. in Charge.

M&L for 40mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)

M&L for 50mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall for protection of underground earth strip when crossing the road/fixing on wall as in repair complete all as specified and directed. (MAKE: JINDAL/PRAKASH/SURYA)

M&L for bricks of sub class ‘B’ bricks, for cable protection in trenches laid dry and flat.

M&L for Boring hole across the Road/plinth/hardstanding/path/drain/pavement etc., suitable for inserting HDPE/GI pipe of upto 100mm dia bore pipe for 0.4 mpa working pressure for cable passing without damaging existing Raod/path/hardstanding/floor by trenchless technology or manual using necessary equipment complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to galvanised iron earht wire lead of 4 mm dia fixed by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 40mm dia upto 3m height above ground level and water pipe 20mm dia GI medium grade with socket and plug 30 cm above ground level including earthwork, PCC chamber in PCC (1:3:6) type C-2 using 40mm stone aggregate, cast iron cover, wire meah etc all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete and all as specified and direcrted by Engr-in-charge Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 30 cms above ground level. (ii) GI strip upto DBs earth connection is included in this item. (iii) GI pipe 40 mm dia protection pipe shall be provided upto Ground level.

Supply and fixing MCCB TPN/TP 40 Amps 415 Volts of braking capacity 36 KA of 3 pole confirming to (Adjustable Thermal and Magnetic Release Setting with short circuit settings) complete taking down old unserviceable one and making necessary connections including all provisions for fixing in panel compartments as existing using necessary links of suitable metals and cleaning the terminals with CTC solutions complete all as specified and directed. Make : Havells/Legrand/IndoAsian (optium 2.0)/Schneider/HPL/Standard

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core

Supply and install hi wall split AC unit Hot and cold inverter technology copper condensor 1.5 Ton 3 Star rating with indoor/outdoor units complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and 2019 BEE rating upgraded versiion inverter compressor variable speed, copper condensor coil of using R-32 ref gas and 5 years warranty for compressor and 1 year on product digital display stabilizer free operation (145 V to 290 V), anti corroision incl provn of remote control and batttery complete all as specified and directed. Make: DAIKIN FTHT50TV16 (R-32) 3 STAR RATING OR equavalent of Voltas,Dolphy,Carrier

Supply and fix Voltage Stablizer for automatic Operation , single phase naturally air cooled Indoor type & designed for input variation between 170 V to 250 V with out put voltage Stablized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA

Supply & Fix Refrigerator double door inverter frost free,auto defrost to stop,ice build up, digital inverter compressor( single phase ) ,230 Vol of capacity not less than 345 Ltrs BEE 3/5 Star rated fresh food capacity not less than 257 ltr freezer cap not less than 88 ltr, noise level 38 dB.( Non CFC), inverter technology, shelfs spill prooof toughned glass, digital display ref gas R600a including suitable heavy duty refregerator stand complete all as specified and directed by Engr-in-charge.Make Samsung Model OR equavalent of Haier/LG/Whirlpool/DAIKIN/DOLPHY Note: manufacturer warranty of 01 year on product and 10 years on compressor

Supply and fix Voltage Stablizer for automatic Operation , single phase naturally air cooled Indoor type & designed for input variation between 170 V to 250 V with out put voltage Stablized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA

HARSH CONSTRUCTION CO.