Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.1 LAccepted-AOC | L1 | Accepted-AOC Being overall rate reasonable | |
| 2 | L2₹33.6 L+₹3.5 L (11.7%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹34.0 L+₹3.9 L (13.0%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹34.1 L+₹4.1 L (13.5%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹34.7 L+₹4.6 L (15.4%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹49.9 L
EMD Value
₹99,860
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
SMART PERIODICAL OF OTM AND MD ACCN ALONGWITH CONNECTED REPAIR WORKS UNDER AGE B/R-II OF GE (CENTRAL) KIRKEE.
2022_MES_571567_1
8734/E8 OF 2022-2023
Open Tender
Civil Works
Item Rate
150 days
KIRKEE
Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹99,860
Yes
3 Feb 2023
27 Dec 2022
23 Jan 2023
27 Dec 2022
21 Jan 2023
9 Jan 2023
27 Dec 2022 - 7 Jan 2023
Amount
NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works and water proofing works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company or their authorised applicator before execution of work and entire work shall be executed with the approved firm. (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.
Material and labour complete removal of existing treatment of wall/ceilling (internal) surface by scrapping with mechanical wall sander (having mechanical vacuum suction mechanism) of RPM not less than 1500, sanding pad of grit 80 and dia 7"/9" to make surface free from dust , loose paint, etc by skilled labour complete all as specified and as directed.
Material and labour complete removal of existing treatment of wall/ceilling surface (external) by scrapping with high pressure washer having jet and washer of 2.2KW power motor, to generate pressure of 110 bars water flow rate 2Ltr/min to remove dirt, dust, mud, grim, stain, fungus etc complete all as specified and as directed.
Material and labour applying one coat of oil bound emulsion distemper of approved tint by "auto roller" (having dimension - 190mmX80mm X40mm, voltage supply : 220 to 240 Volt, power- 45 watt, maximum pumping height - 4mtr, flow- 400ml/min) over and including 3mm thick coat of wall care putty to get smooth finished surfaces complete all as specified and as directed.
Material and labour applying two coats of oil bound emulsion distemper of approved tint over and including 3mm thick neatly finished wall care putty to get smooth finished surfaces on walls by "auto roller" (having dimension - 190mm x 80mm x 40mm, voltage supply :- 220 to 240 Volt, power- 45 watt, maximum pumping height - 4mtr, flow- 400ml/min) complete all as specified and as directed.
Material and labour applying one coat of cement based paint of approved tint including one coat of weather coat exterior primer by airless paint sprayer (pressure not less than 20.7Mpa/3000psi, 1.1L/min flow rate and 7.6 high pressure hose multicolour) by skilled labour complete all as specified and as directed. NOTE :- After applying cement base paint curing shall be done as per manufacturers instructions.
Material and labour applying two coats of cement based paint of approved tint including weather coat exterior primer by air less paint sprayer ( pressure not less than 20.7Mpa/3000psi, 1.1L/min flow rate and 7.6 high pressure hose multicolour) complete all as specified and as directed.
Material and labour applying one coat of white wash on interior wall/ceilling by roller complete all as specified and as directed.
Material and labour applying two coats of white (Lime) wash on interior/exterior wall/ceiling by roller complete all as specified and as directed.
Material and labour for applying two coats of waterproof exterior emulsion paint of approved tint over two base coat/ two coats of primer by "airless paint sprayer" ( pressure not less than 20.7Mpa/3000psi, 1.1L/min flow rate and 7.6 High pressure hose multicolour) by skilled labour complete all as specified and as directed.
Material and labour damp stop (Berger/Birla/Asian paints or equivalent) of 3mm thick on wall surface by using "roller" after smoothening the surfaces using sand paper etc. complete all as specified and as directed. NOTE :- (i) Cracks of wall to be filled with its crack fill paste of make as specified above. (ii) Damp proof should be done by skilled labour and as per manufacturer's instructions.
Material and labour preparation of old painted wooden surfaces of any description including cleaning not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint including cracks on wooden surfaces to be filled with wood filler material complete all as specified and as directed.
Material and labour preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed.
Supply and fix ready made pulley operated clothes drying system of 8ft including 4 Nos of anodized aluminium pipes of 2.70 RM long each, each of outer dia 22mm and inner dia 19.8mm channel assembly, pulleys made up of Delrin with rope guide mounted on channel pair of length 24"(distance between two pipes is adjustable), locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit, rope will be polyster braided undyed of 4mm dia. MAKE :- Easy dry system/Equivalent make as approved by CE Southern Command Pune
Material and labour for repairing the leaking deteriorated and torn out chajjas and parapet walls by removing all the lose materials from the top of the chajja by means of light hammering and chiselling, removing loose concrete cover only and clean all loose particles by high pressure jet water so that all surfaces should be sound, clean and free of contamination followed by application two coats of polymerised cementitious coat like Pidilites Pidifin 2k or equivalent, while second coat is wet apply a 10mm dash coat of cement plaster with the waterproofing compound, completing the repair work by final finishing and providing proper slope of 15 mm thick rendering to prepared surface in cement mortar (1:4) finishing the surfaces even and smooth using extra cement including supply and mixing of water proofing compound as per manufacturers instruction complte all as specified and as directed. MAKE :- Dr.Fixit or equivalent as approved by GE
Taking down cement plaster on wall or concrete surface etc including racking out joints hacking for key scrubing down with water etc complete all as specified and as directed.
Material and labour 15mm thick single component polymer modified cement mortar @34kg/sqm with comp strength min 38mpa at 28 days and tensile strength 2.5mpa as per maufacturer's instruction all as specified and as directed by Engr-in-charge.(Make : Alccoplast ready mix plaster Birla or equivalent)
DARSHAN ENTERPRISES
Shri Sant Cosntruction
L.K.R.TIWARI CONSTRUCTION
M/S AKASH ENTERPRISES
ANIL CONSTRUCTION CO.
greenstone construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .