Construction of Road and CD Work, Levelling of land, Construction of Plot Demarcation Pillars for remaining part of Industrial Zone and Construction of boundary wall at Industrial area Salarpur

Amount

Demarcation of the Industrial area by Total station survey with differential global positioning system ( DGPS) including the marking of outer boundary of the area for which demarcation boundary pillars are to be constructed with topographical survey of land showing physical position of any pipe line ( e.g. gas,oil etc.) passing through the area, road, drain, CD works, electric line, telephone line, wells and other existing structures in the area.Contractor will provide computerized drawing and five prints sets of required size colour print with two sets copies in CD along with original download datas. Showing the following details in soft copy as well as in Hard Copy (05 sets)1 Site plan of all the plots along with longitude and lattitude of corners of the plots2. Block plans with longitude and lattitude of the block at each corners (All blocks if services, open space etc.)3. longitude and lattitude of all the boundary pillars of the area.

Providing and Fixing of Glow sign boards showing the coloured map at Industrial area Salarpur along with following nomenclaturei. Size of the board is 2.70 x1.80 x 0.20 mtrii.The layout map of Industrial Area should be digitally printed on back lit flex banner for glow guide map.iii. Box should be made of G.I. sheet 22 Gauge thick and supported by frame of MS square pipe,size 25 x 25 mm.iv. The board should be guarded with safety nets of M.S. square wire mesh (25 x 25 mm) duly supported with MS angle and flats as per atached drawing.v. Adequate LED lighting inside the guide map should be provided with complete electrical wiring and fixture. Providing and fixing cable of size 2 x 6 sqmm from guide map to nearest power supply point.vi. The stand or angle iron frame or supporting structure made out of 4 nos. of M.S. angle of size 65 x65 x6 mm size and M.S. flat of size 65 x 6 mm should be grouted firmly in ground with cement concrete grade 1: 1.5 :3 of size 0.60x 0.75x 0.90 m as per foundation detail attatched.vii.The work also includes painting of two or more coats with synthetic enamel paint over steel primer on entire structure.The entire work should be done as per direction and with satisfaction of Engineer incharge.

Bidder Name

Amount

Parul construction company(GSTN-08AACFP3708N1ZZ)

M/S ALANKAR CONSTRUCTION COMPANY(GSTN-08AXYPS2291Q1Z4)

Bidder Name

Amount

Parul construction company(GSTN-08AACFP3708N1ZZ)

M/S ALANKAR CONSTRUCTION COMPANY(GSTN-08AXYPS2291Q1Z4)

Bidder Name

Amount

Parul construction company(GSTN-08AACFP3708N1ZZ)

M/S ALANKAR CONSTRUCTION COMPANY(GSTN-08AXYPS2291Q1Z4)

M/S ALANKAR CONSTRUCTION COMPANY

M/S ALANKAR CONSTRUCTION COMPANY

M/S ALANKAR CONSTRUCTION COMPANY

M/S ALANKAR CONSTRUCTION COMPANY

M/S ALANKAR CONSTRUCTION COMPANY