CA NO GE S U 04 2023 24 REPAIR REPLACEMENT OF DOOR WINDOW JOINERY INTERNAL WATER SUPPLY AT HQNC COMPLEX UNDER AGE BR II GE SOUTH UDHAMPUR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 3 Sqm each and removing from site, complete all as specified and as directed.

Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Taking down cement plaster of any descreption on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling, complete all as specified and as directed.

35mm thick flush shutters factory made solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and as directed.

30mm thick IInd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 fitted to chowkats complete all as specified and as directed.

M&L for aluminum alloy powder coated (50 micron) anodized door frame of section 100 mm x 44 mm x 2mm thick,door shutter of aluminum section of size 85 mm x 44 mm x 2 m thick, top rail and both styles of size 100mm x 44 mm x 2mm thick,lock rail and bottom rail of size 115 mm x 44 mm x 2 mm thick including aluminum anodized snap beading and rubber packing,& 5 mm thick colour designer glass including, 200 mm long tower bolt-2 Nos, 200 mm long Aluminium handle-02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock & double action floor door spring heavy duty suitable for shutter for each leaf complete all as specified and as directed.

M& L for aluminium alloy powder coated any tint standard hollow section with special powder coated coloured or any tint window frame with one glazed shutter (fixed) and two Nos glazed and wire gauged shutter sliding type with aluminium section as per series -A(15mm) 3 track of Jindal section number of sliding windows, with framed shutter including aluminium alloy powder coated snap type beads handles aluminium powder coated barrel tower bolts & glazing clips. joints cleats rubber gaskets etc compl all as specified including provision of 5mm thick tinted glass of superior quality and stainless steel wire cloth of 0.36mm nominal dia wire and average width of aperature 1.4 mm and aluminium grill including all standard fittings complete all as specified and as directed.

Powder coated (50 micron of approved colour) Aluminum anodised double shutter window (glazed and wire gauge) side hung with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including aluminium grill and all fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including aluminium tower bolt 75mm 02 Nos in each shutter, aluminium hinges 100mm B-12) 02 Nos in each shutter, aluminium handle 100 mm 01 No in each shutter including all accessories complete all as specified and as directed.

18/19mm thick Prelaminated particle board, termite proof, chemically well pressed, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, as in kitchen cabinet, cub boards,wardrobe, book case, shelve etc including 6mm thick teak wood beading all around , fixed in repairs, complete all as specified and as directed.

Solid PVC moulded door frame of size 50mmx47mm made out of 5mm plain wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube and fixing in opening, complete all as specified and as directed.

Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification complete all as specified and as directed.

Aluminium alloy powder coated (50 micron) anodized frame of section 85mm x 44mm x 2mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, partly glazed with 5mm thick tinted glass and partly with 12mm thick prelaminated particle board, fixed in repairs complete all as specified and as directed.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

All as per Item No 15 above but wire gauge shutters complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

S&F 8mm Toughned glass (Etching design on glass as approved by GE as in windows, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

S&F 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and connecting all premium acessories as required complete all as specified and as directed.

Venetian blinds of approved make, vertical or horizontal type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.

100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

Aluminium handles cast type anodized 150mm size, complete all as specified and as directed.

250mm size aluminium alloy, anodized sliding door bolt with hasp, stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

Floor door stopper of 140mm size of alluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in repair complete all as specified and as directed

Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and as directed.

S&F in repairs spindle for bib tap/mixer etc all as specified and as directed.

Galvanised steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, and fixed with tinned tacks or galvanised mild steel staples, fixed in repairs, complete all as specified and as directed.

S&F in repairs for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders, water tank staging,Railing framed balusters and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F continous (Piano) hinges, mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

S&F in repair stain less steel door catcher of superior quality all complete all as specified and as directed.

S&F brass mortice lock of 4 levers 100 mm thick fixed in aluminium door complete all as specified and as directed.

Drawer side channel of standard size and including of rooler for moving drawer, mild steel bright finish, or electro galavanised width of flap 30 mm & Length 60 mm in repair complete all as specified and as directed.

Stainless steel multi-purpose basket in wooden drawer/partitions for storing rations of various types made of 4 mm dia stainless steel rods, fixed in side partitions etc fixed in repair complete all as specified and as directed.

Stainless steel luddle-craddle hanging stand for cutlery in repair complete all as specified and as directed.

4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, including Dismantling existing wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed.

10-12mm thick perforated gypsum boards seemless as in ceiling as approved, moisture resistant, including intermediate, perimeter channel wall channel, along with nuts and bolts connecting plates for gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface, including Dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets,of complete all as specified and as directed. Note: (a) Design of paneling board as approved by GE. (b) GI grid, hanhing system shall be of same manufacture.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

M & L in repair hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc complete all as specified and as directed.

0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed.

0.50mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550 Mpa as in roof covering, wall cladding with self tapping screws or 'L' type or 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed.

S&F in repairs solid PVC wall lining (wall panelling design and colour shall be approved by GE consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and as directed.

Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed by Engr-in- Charge. Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialized agency/applicator which will further have to rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise.

50 mm thick cement concrete 1:4:8 type D-2 (40mm grade aggregate) as in sub base complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Vitrified Dura stone tiles of size 300 x 300 x 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed.

M & L machine cut kota stone slab flooring 18-20mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4 complete all as specified and as directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , area of each tiles exceeding 0.42 Sqm but n exc 1.00 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4 complete all as specified and as directed.

Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specifed and as directed.

Non skid ceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4 complete all as specified and as directed.

Glazed ceramic coloured tiles 300mm x 600mm x 7mm thick as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.

Glazed ceramic wall cladding tiles 300x450mm on exterior wall surface design and size as approved GE as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.

Brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brick work complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and as directed.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces in multistoried bldgs, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and as directed.

Preparation of old decorative surface of wall and applying one coat of plastic emulsion paint white/coloured complete all as specified and directed.

Applying one coat of cement base paint on old external wall surface up to G+2 floor height, including preparation of surfaces complete all as specified and as directed.

Applying two coats of weather proof exterior emulsion paint (Asian Ultima APEX or Berger Weather All guard or equivalent) over a coat of exterior weatherproof wall care putty up to G+2 floor height including preparation of surfaces etc complete all as specified and as directed.

Preparation of old decoarated wall/ceiling surfaces and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and as directed.

Preparation of surface and applying textured painting (granular or impression type), any colour and any position complete all as specified and as directed.

Preparation of old painted wooden/Steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed. (Make : Smart Care Damp Block 2K/Dr. Fixit

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

S & F in repair Vitreous china squatting pan 'Orissa' pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete all as specified and as directed.

Seat cover best quality for cascade type/Single piece WC, white of composite model with closed pattern type including steel hinging device, fixed in repairs, complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern white inlet float valve, handle complete including brackets complete all as specified and as directed.

S&F in repair 15mm bore dia of pipe in Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Angle valve of brass fancy type, chromimum plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

S&F in repair Sinks with draining board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

PVC connection 15 mm size with PTMT nuts 600mm long, fixed in repairs, complete all as specified and as directed.

S&F in repair countertype vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and as directed.

S&F in repairs 0.5HP Water pressure pump of automatic ON and OFF operation, noise less operation and low power consumption, Y type brass strainer (to avoid clogging) and float switch (for dry run protection) complete all as specified and as directed. Make Cat Part No CFMSMB3D0.50-V24.

Ball valves PTMT of size 20mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixing in repair complete all as specified and as directed. (Minimum weight not less than 210 gms ).

Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm fixing in repair, complete all as specified and as directed.

Waste pipe of unplasticized PVC pipes of pressure rating 10 kgf/sq. cm, suitable for sink & WHB, in repair complete all as specified and as directed.

CP 20mm dia, Stainless steel, tubular curtain rail, fixed with fancy brackets, complete all as specified and as directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

Water closet wall mounted pattern coloured of size 535 x 380 x 400 mm in repair as approved by GE complete all as specified and as directed. Make : Cat Part No (S1041109 P trap), Seat cover B1510108 Clair seat cover.

WHB coloured 550 mm x 480 mm with Pedestal in repair as approved and complete all as specified and as directed.

15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and as directed. Make: Cat Part No CON 167KNB.

S & F 15 mm bore wall mixer fixed/Sink mixer in repair complete all as specified and as directed.

S & F 125 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and as directed.

15 mm bore long body Bib tap in repair complete all as specified and directed. Make : Cat Part No CON-037KN.

15 mm bore Bib tap in repair complete all as specified and directed. complete all as specified and as directed.

Towel rack in repair complete all as specified and as directed. Make : Cat Part No ACN 1181FN.

Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and as directed. Make : Cat Part No F8030103.

Chromium plated toilet paper holder in repair complete all as specified and as directed. Make : Cat Part No ACN 1153N.

600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and as directed. Make : Cat Part No ACN-1111NM.

Soap dish in repair complete all as specified and as directed. Make : Cat Part No ACN 1131N.

khajuria builders

s l sharma and sons

VISHWANATH AND SONS

vijay constrction co

SINGH CONST CO

BHAGWATI TRADERS