Repair/replacement of UG cables, circuit breakers, street lights, LT Pannel board, Capacitor Banks, Switch and misc electrical works at Vayusenabad under GE (AF) Tughlakabad

Amount

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5mtr in depth for foundation etc or for laying of under ground cable/shaft well, cesspits, manholes, fire hole etc not exceeding 10 Sqmm on plan and not exceeding 1.5mtr in depth and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning in trenches for protection of LT underground cable including watering and consolidation complete all as specified and directed by Engr-in-Charge. Note: Punned thickness shall be measured and paid for payment purpose.

Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete all as specified and directed by Engr-in-Charge.

M&L for jointing, testing and commissioning in replacement heat shrinkable straight through Jointing Kit suitable for LT Cable of size 70 Sq mm to 120 Sqmm, 3.5 or 4 core complete all as specified and directed by Engr-in-Charge. Make:- Cat No XSSO-4 of Denson/Cat No EPKJ0137 of Raychem/Cat No- MHSX1.1 KV(HSLA-3/4) of 3M

-ditto- all as per item No 6 above but of size 25 Sq mm to 50 Sqmm, 3.5/4 core. Make:- Cat No XSSO-3 of Denson/Cat No EPKJ0130 of Raychem/Cat No- MHSX1.1 KV(HSLA-2/4) of 3M

Taking down old unserviceable security light fittings from pole upto 11 mtr height and S&F new LED street light fitting of capacity 60 watt 5700K, made up of pressure die cast housing with toughened glass and individual high power LEDs, IP66 protection and impact resistance of IK07 with 10KV built in surge protection device having top opening separate driver compartment with all electrical accessories complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No- ENDURAPEARLNEOSL60WLED757 PASYTOPC/Cat No LTESS60WLED of C&S/Cat No BRTFG60WLEDV3 of Bajaj

Taking down old unserviceable security light fittings from pole upto 11 mtr height and S&F new LED street light fitting of capacity 45 watt 5700K, made up of pressure die cast housing with toughened glass and individual high power LEDs, IP66 protection and impact resistance of IK07 with 10KV built in surge protection device having top opening separate driver compartment with all electrical accessories complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No- ENDURAPEARLNEOSL45WLED757 PASYTOPC/Cat No LTE55I45WLRD of C&S/Cat No FLN0545WEW of Bajaj

M&L in replacement of cable XLPE insulated screened PVC bedded, galvanised steel wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of the following sizes complete all as specified and directed by Engr-in-Charge: Note: Excavation and earth work if any required shall be measured and paid separately under relevent items.

240 Sq mm 3.5 Core

95 Sq mm 3.5 Core

50 Sq mm 3.5 Core

35 Sq mm 3.5 Core

25 Sq mm 4 Core

16 Sq mm 4 Core

10 Sq mm 2 Core

Taking out old Unserviceable street light timer switch and M&L for testing and commissioning of NATURE Switch for outdoor lighting automation using space grade sensors and an advances micro controller suitable for outdoor use having features Automatic Switching ON at Sunset, Automatic Switching OFF at dawn, No clock setting and time settings wide operating voltage range, High voltage trip and auto reset having specification 230 Volts, 50 Hz with all connected accessories of rating 12 KW 3 phase, current range 40 Amps complete all as specified and directed by Engr-in-Charge. Make- Model No- SWADEEP-02EC12KW3P of Kaktiya Energy System/ Cat No UNS-12 of Universal Switch Gear & Control System

Supply and laying electrical rubber insulating Mat of size 01 metre wide X 10 metre long having thickness 2.5 to 3.2 mm of black/grey colour (as per site requirement) with anti skid top surface suitable for 11 KV power supply as per IS-15652:2006 complete all as specified and directed by Engr-in-Charge.

Supply and laying electrical chequered rubber mat as per IS-5424/69, size 1000 x 2000 mm with 19 mm thick, black in colour complete all as specified and directed by Engr-in-Charge.

M&L for PVC flat twin core cable with aluminium conductor of size 10 Sqmm 2 core suitable for 1100 volts power supply including taking out old one complete all as specified and directed by Engr-in-Charge.

Taking out by disconnecting/unscrewing all electrical connection of unserviceable post top light and S&F, testing and commissioning of post top of 35 Watts capacity suitable for 240 volts, 50 Hz single phase power supply, light, spun aluminium landscape luminaire with high power LEDs as light source with all standard accessories complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No-RUBYPT35WLED75PSYMTOPC/Cat No LTGLC30WHPLED of C&S/Cat No FLGO135WCW of FIEM

Taking out old unserviceable landscape light from the existing position and S&F, testing and commissioning of landscape luminaire aluminium cast for diffused lighting with high power LEDs as light source having height 1.0 metre of 08 watts capacity suitable for single phase, 240 volt, 50 Hz power supply complete all as specified and directed by Engr-in-Charge. Note- Necessary PCC and excavation work will be measured and paid separately. Make- Havells Cat No-BAMBOOBL8WLED857SSYMTOPC91.0 M/Bajaj Cat No BGBOS6009WLED/ C&S Cat No LTGLCR9WLED

Taking out by disconnecting/unscrewing all electrical connection of unserviceable flood light from a height upto 12 mtr and S&F, testing and commissioning of flood light of 50 watts capacity suitable for 240 volts, 50 Hz single phase power supply, fabricated with die cast aluminium with high power LEDs as light source with all accessories complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No JETACOMPECTOFL50WLED757LTG /Cat No LTEF50WHPLED of C&S/Cat No FLM0650WCW of FIEM

Taking out by disconnecting/unscrewing all electrical connection of unserviceable flood light from a height upto 12 mtr and S&F, testing and commissioning of flood light of 100 watts capacity suitable for 240 volts, 50 Hz single phase power supply, fabricated with die cast aluminium with high power LEDs as light source with all accessories complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No JETAIRISFLS100WLED757ASYMLTG/ Cat No FLM061000WCW of FIEM/Cat No LTEF100WHPLED of C&S

Taking out by disconnecting/unscrewing all electrical connection of unserviceable vertical medium bay light from at a height upto 12 mtr and M&L for testing of vertical medium bay light of 90 Watts capacity suitable for 240 volts, 50 Hz single phase power supply, fabricated with die cast aluminium with high power LEDs as light source, IP-65 with all standard accessories complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No ENDURAHIBRITEPLUSHBP150WLED 765P60DTOLEDS/Cat No FLL0290WCW of FIEM/Cat No LTEHB90WHPLED/LS of C&S

Taking out old unserviceable bus chamber of any rating and M&L for bus bar chamber current rating 200 Amps 8 way type suitable for 415 Volts, 50 Hz AC supply making all incoming and outgoing connections complete all as specified and directed by Engr-in-Charge. Make: Cat No IHBCO13980 of Havells

Taking out old unserviceable MCB of any type and S&F MCB ‘C’ series TPN 63 Amps, 4 pole rating, as per IS-60898-1, 415 Volts, 50 Hz, 10 KA, complete all as directed by Engr-in-charge. Make: Cat No 8100898 of Indoasian/ Cat No BB40630B of L&T /Cat No DHMGCTNF063 of Havells

M&L for providing cement concrete type B2 1:2:4 by using 40 mm graded stone aggregate in foundation, filling and mass concrete including dismantling the existing work complete all as specified and directed by Engr-in-Charge.

M&L for Excavation by Trench less Boaring Technology method for making holes under road, pavement, hard standing using Ultra sound technique and engaging necessary Machine including HDPE pipe duly ISI marked of dia upto 100 mm suitable for 0.4 MPA working pressure complete all as specified and directed by Engr-in-Charge. Note - HDPE pipe and making good the disturbed surface is deemed to be included in rate quoted by the Contractor.

Taking down /dismantling the old unserviceable solar street light from the existing location and S&F, testing and commissioning of all in one solar street light having luminaire wattage 12 Watt, LED type, Maximum power point tracking (MPPT) SCC solar charge controller, Mono Crystalline SPV panel of 30 watts, Lithium Ferro Phosphate Battery (LiFe04) 12.8 Volts and 14 AH with 2 days backup complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No LHSTAKV7CBAF 012/Cat No 112567 of Bajaj

S&F, Commissioning and Testing of panel board Power safe enclosures (Load Bank MCCB incomer and 4P MCCB outgoing) confirming to IS:8623, IEC:60439, powder coated CRCA sheet enclosure having 250 Amps AA frame MCCB, single door type with 4 outgoing ways with all connected accessories complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No-IHVGF25004 / Cat No JN2B00004516 of Hager/ Cat No DBVTH00454 of L&T

S&F, Commissioning and Testing of Cable alley for G frame panel boards, outgoing 4 pole MCCB confirming to IS:8623, IEC : 60439, powder coated CRCA sheet enclosure suitable for 250 Amps incomer MCCB and 4pole outgoing MCCB GF 8 ways complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No - ISSBOU0678 /Cat No VYDOOE2 of Hager/ Cat No DBVTXXXXCB of L&T

Taking down unserviceable LT panel of any size complete all as specified and directed by Engr-in-charge.

Supply, Installing, Testing and Commissioning of LT panel board of size upto 2.90 x 1.45 mtr outdoor type, double door, fabricated from quality 3.15 mm thick CRCA sheet and angle iron including powder coated, making earth connections etc. The panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing type extendable from both sides, suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size cable tray gear mounted including MS angle frame of size 40x40x5 mm structure at bottom, PCC 1:2:4 type B1 by using 20mm gradded aggregate for foundation etc complete suitable to AC 23 duty confirming to IS-4064 with and including the following accessories :- BUS BAR CHAMBER:- TPN, Aluminium conductor, Supported on insulated plate form, interconnection of all incomings & outgoings. Notes: (i) Necessary excavation and PCC required to carried out for installation of LT panel board is deemed to be included in quoted rate. (ii) Old unserviceable/MCCBs of any rating and type retrieved from the Old panel will be the Govt. property) and to be deposited in AGE E/M store yard and necessary inventaries to be attached with bill / RAR.

Contd sl item No 29.00: Make of Panel: Universal Switch Gear Control/Seimens/L&T /Schneider (a) Bus bar chamber of 3 phase 4 strip 415 volts with 630 A main and 320 A Neutral, Aluminium strip 1 set Supported on insulated platform, interconnection of all incomings & outgoings. (b) MCCB 4 pole in coming 630 Amp 35/36 KA with earth fault relay -01 No. Make: Cat No IHLLSEBF0630 of Havells/Cat No 422065 of Legrand. (c) MCCB 4 pole out going 200 Amp 25 KA = 01 No. Make: Cat No IHLANDCF0200 of Havells/Cat No 420228 of Legrand. (d) MCCB 4 pole out going 160 Amp 25 KA = 02 Nos. Make: Cat No IHLANDCFO160 of Havells/Cat No 420227 of Legrand. (e) MCCB 4 pole out going 100 Amp 25 KA = 04 Nos. Make: Cat No IHLASDCFO100 of Havells/Cat No 420075 of Legrand. (f) On load changeover switch 4P 630 A = 01 No. Make: Cat No IHCNFEO630 of Havells/Cat No CO46300OSOO of L&T. (g) Spare Pocket for mounting MCCB = 01 No. (h) Digital Voltmeter 0-500W volt = 01. Make: Cat No WDS301FEV00 of L&T. (j) Digital Amp meter 0-630 Amp = 01. Make: Cat No WDS301FCA00 of L&T. (k) Indicator lamp yellow, Red, blue (l) Complete wiring of the panel board. (m) CT ratio 630/5 Amps.

Supply, Installing, Testing and Commissioning of LT panel board of size upto 2.40 x 1.30 mtr outdoor type, double door, fabricated from quality 3.15 mm thick CRCA sheet and angle iron including powder coated, making earth connections etc. The panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing type extendable from both sides, suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size cable tray gear mounted including MS angle frame of size 40x40x5 mm structure at bottom, PCC 1:2:4 type B1 by using 20mm gradded aggregate for foundation etc complete suitable to AC 23 duty confirming to IS-4064 with and including the following accessories:- Make of Panel: Universal Switch Gear Control/ Seimens/L&T/ Schneider BUS BAR CHAMBER:- TPN, Aluminium conductor, Supported on insulated platform, interconnection of all incomings & outgoings. Note- (i) Necessary excavation and PCC required to carried out for installation of LT panel board is deemed to be included in quoted rate. (ii) Old unserviceable/MCCBs of any rating and type retrieved from the Old panel will be the Govt. property) and to be deposited in AGE E/M store yard and necessary inventaries to be attached with Bill / RAR

Contd sl item No 30.00: (a) Bus bar chamber of 3 phase 4 strip 415 volts with 400 A main and 250 A Neutral, Aluminium strip 1 set Supported on insulated plate form, interconnection of all incomings & outgoings. (b) MCCB 4 pole in coming 400 Amp 35/36 KA with earth fault relay -01 No. Make: Cat No IHLLSEBF0400 of Havells/Cat No 422063 of Legrand. (c) MCCB 4 pole out going 160 Amp 25 KA = 02 Nos. Make: Cat No IHLANDCF0160 of Havells/Cat No 420228 of Legrand. (d) MCCB 4 pole out going 100 Amp 25 KA = 03 Nos. Make: Cat No IHLASDCFO100 of Havells/Cat No 420075 of Legrand. (e) On load changeover switch 4P 400 A = 01 No. Make: Cat No IHCNFEO400 of Havells/Cat No CO44000OSOO of L&T. (f) Spare Pocket for mounting MCCB = 01 No. Make: Cat No IHCFFEO630 of Havells/Cat No CO46300OSOO of L&T. (g) Digital Voltmeter 0-500W volt = 01. Make: Cat No WDS301FEV00 of L&T. (h) Digital Amp meter 0-400 Amp = 01. Make: Cat No WDS301FCA00 of L&T. (j) Indicator lamp yellow, Red, blue (k) Complete wiring of the panel board. (l) CT ratio 400/5 Amps.

Dismantling of old existing looping box including disconnecting of incoming/outgoing cables & removing from site and Supply, installation and testing of non transparent SMC Kiosks box 3 phase with 4 Nos bus bar, 63 Amps aluminium 4 Wire and 01 Nos Kit cat fuse of 10 Amps factory made, outdoor type made out of 14 gauge steel sheet, locking arrangement, front side of suitable size 300x200x100mm complete all as specified and directed by Engr-in-Charge. Make : Cat No GSJB-3020 of Sintex or equivalent

Dismantling of old existing Bus bar chamber/ panel including disconnecting of incoming/outgoing cables & removing from site and Supply, installation and testing of Outdoor type Bus bar box having CRCA sheet thickness 3.15 mm, with bus bar rating 600 Amps with 4 strips aluminium having enclosure size 900x700x600 mm with angle iron of 50x50x6 mm , locking arrangement, having minimum height 1.5 feet duly grouted or welded on floor including, powder coated paint complete all as specified and directed by Engr-in-Charge. Make: Havells/L&T/Universal

M&L in replacement of galvanised pipe of dia 40 mm light grade will all fitting laid in trenches for passing of cables etc complete all as specified and directed by Engr-in-charge. Note: Necessary Earth work and excavation shall be measured and paid separately under relevant items.

M&L for Earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to but using GI strip 25x4 mm size and galvanised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 3 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work, PCC 1:3:6 type, C-1 by using 20mm gradded aggregate, pit with precast RCC Cover slab 40 mm thick in PCC1:2:4 type B-0 by using 12.5mm graded aggregate reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe complete all as specified in SSR and connected to earthing list point complete all as specified and as directedby Engr-in-charge.

S&F in replacement of framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings also fastening, double coats of enamel paint and fixing complete all as specified and directed by Engr in charge.

S&F in replacement the following accessories in LT panel boards/feeder pillar boxes including disconnecting and removing the existing items from the electric circuits including necessary connected fasteners, burnt cables, accessories etc. complete all as specfied and directed by Engr-in-charge for the followings:-

MCCB 63 Amps 4 Pole breaking capacity 16 KA. Make: Cat No 420013 of Legrand / Cat No IHLGNF0063 of Havells/Cat No CM90518OOHO of L&T

MCCB 100 Amps 4 Pole breaking capacity 25 KA. Make: Cat No 420055 of Legrand / Cat No IHLGNF0100# of Havells

MCCB 160 Amps 4 Pole breaking capacity 25 KA. Make: Cat No 420057 of Legrand / Cat No IHLGNF0160# of Havells/Cat No CM90634OOMO of L&T

MCCB 200 Amps 4 Pole breaking capacity 25 KA. Make: Cat No 420218 of Legrand / Cat No CM90634OONO of L&T

MCCB 250 Amps 3 Pole breaking capacity 35 KA. Make: Cat No IHLFNF0250# of Havells / Cat No IHLGNF0250# of Havells/Cat No CM90634OOPO of L&T

MCCB 320 Amps 3 Pole breaking capacity 35 KA. Make: Cat No 422006 of Legrand/Cat No CM98404OOQO of L&T

MCCB 400 Amps 3 Pole breaking capacity 35 KA. Make: Cat No 422007 of Legrand / Cat No IHLLSEBF0400 of Havells/Cat No CM98404OORO of L&T

Dehydration and filtration of the existing transformer/servo voltage stabilizer oil by dehydration plant to achieve di-electric strength of 40 KV at the gap of 4 mm complete all as specified and directed by Engr in charge. Note: Dehydration plant shall be brought at site by the contractor and the quoted rate shall include the following provisions:- (a) Testing of transformer/servo voltage stabilzer oil before & after dehydration shall be carried out as directed. (b) The unit of payment under this item shall be per litre of oil meant for all processes to the entire completion of work. (c) Contractor will maintain a register of dehydration and filtration of each and every equipment as per format given by Engr-in-charge and submit the same to Engr-in-charge for acceptance of filtration process.

Supply and filliing transformer oil for topping up or replacement in different existing transformers outdoor/indoors type of any capacity located and installed at different places and different height complete all as specified and directed by Engr in charge. Note: The entire quantity of transformer oil shall be procured in one go. The complete material shall be brought at site and then as per requirement of oil shall be shifted to site. The purchage vouchers of transformer oil shall be verified by AGE personally and certificate for the supply of transformer oil shall be kept on record.

Supply and replacement of dehydrating agents (Silica gel) in transformers of capacity upto 1000 KVA transformer outdoor/indoor type complete all as specified and directed by Engr in charge.

Supply and replacement of LT bushing of brass stud and bolts with porcelian insulator suitable size to fixed the transformer capacity range 1000 KVA including replacement of gasket, cable glands etc to make the transformer leak proof complete all as specified and directed by Engr in charge.

Supply only ceramic bushing and gasket on LT side of transformer of 1000 KVA capacity complete all as specified and directed by Engr in charge.

-Ditto- All as per sl item No 41 above but on HT side of transformer.

Supply and replacement of aluminium lugs of size varying from 6 Sq mm to 70 Sq mm for jointing the cable complete all as specified and directed by Engr in charge. Make: Cat No ALS-226 of Dowells or equivalent in Denson

Supply and replacement of aluminium lugs of size varying from 90 Sq mm to 240 Sq mm for jointing the cable complete all as specified and directed by Engr in charge. Make: Cat No ALS-236 of Dowells or equivalent in Denson

M&L for Painting to LT steel tubular poles of 9 mtr long along with cross arms, clamps, channels, bracings etc complete with machine spray after cleaning and preparation of the surfaces, externally with two coats of aluminium paint duly making 30 cm width circular bands of 3 Nos alternatively 1 metre height from ground level with blue paint making back ground and writing numbering of the poles complete all as specified and as directed by Engr-in-charge

Taking down old Unserviceable security light driver from pole fitting upto 11 metre height and S&F new electronic driver suitable for fixing in any make 45/60 Watt LED light fitting complete all as specified and as directed by Engr-in-charge. Make: Bajaj & as per existing sample approved by GE.

Note: The amount of Rs 67,080.00 against schedule of credit given on Tender Serial Page No 42 shall be deducted from the total amount quoted by the contractor against BOQ while deriving the contract sum for acceptance.

M/S Delhi Engineering Co.

V r traders

Neeraj Enterprises

Surjit and Sons