Loading
Loading…
Loading…
Tender Value
₹34.1 L
EMD Value
₹68,200
Closing Date
27 Apr 2026, 9:30 pmClosed
Karnataka State Road Transport Corporation
karibasappa
Construction Of Crew Rest Room & 02 Nos of Guest Rooms in Third Floor at Sri.D.Devaraju Arasu Bus Station Tumakur
KSRTC/2026-27/BD/WORK_INDENT171
KSRTC/2026-27/BD/WORK_INDENT171
Open
Buildings
Two Tender Document System(Two Cover)
KSRTC Divisional Controller Office Tumakuru
4 documents required · 4 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
To Qualify for award of this contract the tenderer must have valid Class - I Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scan Copy of Valid contractors Registration Certificate.
To Qualify for award of this contract the tenderer, as a prime contractor, should have in his name Satisfactorily completed at least One Single work of Similar Nature of Bus Station/RCC Framed Structure Building Work Costing not less than Rs 17.02 Lakhs. The work should have been commenced and completed in any year during the last five financial years (i.e from 01-04-2021 till date of submission) i.e the work must have commenced on or after 01-04-2021 and completed till the date of submission of tender. Note: The work done certificate shall clearly mention the date of commencement & date of completion. Scanned copy of the Work done Completion Certificate, Certified by an Officer not below the rank of Executive Engineer in case of works done in Govt/Public Sector under taking.
To Qualify for award of this contract the tenderer in his name should have, in the last five financial years ( i.e. during the years 2021-22 , 2022-23 , 2023-24 ,2024-25 & 2025-26) achieved in at least two financial years a minimum average financial turnover of Rs 34.05 Lakhs (in all classes of civil engineering construction works only ).Scanned copy of audited profit / loss statement of at least two financial years in which minimum financial turnover of Rs. 34.05 Lakhs. is achieved . (Certified by Chartered Accountant along with UDIN and membership number only. Statement issued by others will not qualify for eligibility).
To Qualify for award of this contract the assessed available tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity ( (Ax N x 2.5) - B) WhereA Maximum value of Civil Engineering works, (updated to the financial year of Tender invited), executed in any one year during the last five years. (Completed as well as works in progress).B Value at price level (updated to the financial year of tender invited) of existing commitments and ongoing works to be completed during the next two years.N Number of years prescribed for completion of the work for which tender is invited.2.5 Multiplying factor for assessing the available tender capacity for works costing upto Rs.100.00Lakhs.The bidder/Contractor must submit details of existing commitments and on going works to be completed in the Prescribed format only (Annexure - B) Details of the works which have been completed and final bill is yet to be settled should also be provided .In case the bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format duly signed by the bidder Details submitted in any other format or other format or submission of document in which the bidder himself has calculated the bid capacity will not be considered and will not qualify for eligibility
₹860
₹68,200
12 Apr 2026
12 Apr 2026
29 Apr 2026
22 Apr 2026
Construction Of Crew Rest Room & 02 Nos of Guest Rooms in Third Floor at Sri.D.Devaraju Arasu Bus Station Tumakur
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever re...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, p...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawin...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
P Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pa...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with stan...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with cente...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with ...
Providing and Applying PU based Elastomeric Liquid Applied PU
Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proo...
Providing and fixing chromium plated brass curtain rod with ISI mark having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever...
Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 g Vol-2, PG No-118, IN -13.17.1
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Vol-2, PG No-137, IN -14.40
Providing and fixing 100 mm sand cast Iron grating for gully trap.Vol-2, PG No-128, IN -14.29
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...
Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box (BESCOM Vol-V/P-5/2.2.2)
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box (BESCOM Vol-VI/P-5/2.2.3)
Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and run...
25mm dia 2mm thick(BESCOMVol-VI/P-2/1.2.2)
Open Conduit System :Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
do. 4-5Way(BESCOM Vol-VI/P-8/3.4.3)
do. 8Way(BESCOM Vol-VI/P-8/3.4.5)
do. 10-12Way (BESCOM Vol-VI/P-8/3.4.6)
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
do. 4 Module (BESCOM Vol-VI/P-8/3.5.3)
Do- 8 Module(BESCOM Vol-VI/P-8/3.5.5)
Do- 10-12 Module (BESCOM Vol-VI/P-8/3.5.6)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch(BESCOM Vol-VI/P-9/3.6.1 )
Do- 6Amps 3way socket (BESCOM Vol-VI/P-9/3.6.3)
Do- Stepped Fan Regulator. 02 module(BESCOM Vol-VI/P-9/3.6.4)
Do-16Amps one way switch (BESCOM Vol-VI/P-9/3.6.7)
Do- 6/16Amps universal socket (BESCOM Vol-VI/P-9/3.6.10)
Do- TV/Telephone socket (BESCOM Vol-VI/P-9/3.6.11)
Supplying PVC/GI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using...
Do- 32mm(BESCOM Vol-VI/P-3/1.9.3)
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Do-2.5 sqmm(BESCOM Vol-VI/P-5/2.3.3)
Do- 4 sqmm (BESCOM Vol-VI/P-5/2.3.4)
Do- 16 sqmm(BESCOM Vol-VI/P-6/2.3.7)
Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc , and fixing on existing wooden or metal box using N.F. screws.(BESCOM Vol-VI/P-9/3.8)
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Po...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mmains connector & has...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete 15" Sweep (450 mm) (BESCOM Vol-VI/P-30/6.2.2)
Fixing all types and all capacities fluorescent / CFL / false ceiling fixtures indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round...
Fixing a ceiling / wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 ampers ceiling rose, necessary length of 23/0.0076 inch PVC insulated...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5Amps ceiling rose with sufficient length of 23/0.0076inch PVC insulated twin core wire of approved make. (BESCOM...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
6-32Amps DP (BESCOM Vol-VI/P-17/5.18.4)
6-32Amps TPN(BESCOM Vol-VI/P-17/5.18.7)
Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 ...
Do- 8Way SP &N(BESCOM Vol-VI/P-18/5.19.8)
Do- 12Way SP &N(BESCOM Vol-VI/P-18/5.19.9)
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (BESCOM Vol-VI/P-19/5.34)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (BESCOM Vol-VI/P-19/5.38)
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . The pit shou...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip (BESCOM Vol-VI/P-54/12.58.2)
1.1 kV, XLPE or Heat resistant PVC
insulated, PVC exutruted Inner Seath
Armoured LTUG Cable as per IS-1554 (Part-
1) or IS-7098 Part-1, Armouring strip
thickness and resistivity as per IS-3975 16 Sqmm...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm(BESCOM/Vol-VI/ 21.05 )
Supplying.....litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG ...
Erection charges for fixing a …liters capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender notification rest rm.doc
Others - Tender Notification • 0.75 MB
kw2.doc
Others - Bid Document • 0.97 MB
annexure b_bid capacity.doc
Others - Bid Capacity-Annexure-B • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .