A) Hyderabad Division: SC-DHNE section: Proposed construction of cover over approach, grouting of construction joints and construction of catch water drains at RUB in lieu of LC No 68 B) Hyderabad Division: SC-DHNE section: Proposed construction of cover over approach, grouting of construction joints and construction of catch water drains at RUB in lieu of LC No 83

Item Breakup - C1-USSR 2021

1740.00 minimum 50mm dia. spaced equally HYDERABAD DIVISION-ENGINEERING/SOUTH CENTRAL RLY Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge. Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines.

cum Centering and shuttering including strutting, propping etc. and removal of form for :

4500.00 abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level Extra over 025040 for drilling of holes and insertion of dowel bars in case of Jacketing

169.00 anchoring

169.00 dia. (cost of rods to be paid extra) Providing and fixing various size HTS holding down bolts conforming to relevant Codes/Specification in concrete column or in other structures with proper nuts, bolts, washers/plates, grouting of holes with cement or epoxy concrete with all material, labour, T&P as a complete job.

21600.00 from any location. Payment to be done for Hour Horse power of pump multiplied by pumping hours. Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.

90.00 other misc. works. Total 4943478.51

Item Breakup - C2-USSR-2021

423.00 2576.61 graded stone aggregate 40 mm nominal size).

525.00 2646.72 batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for the following Reinforced cement concrete structural elements up to height of 9.0 m from foundation top level, including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item.

cum Total 5845184.63

Item Breakup - C3-USSR-2021

53 approved brands/makes Total 4775967.98

Item Breakup - C4-USSR-2021

10000.00 500D or more of approved brands/makes. HYDERABAD DIVISION-ENGINEERING/SOUTH CENTRAL RLY Total 982700.00

Item Breakup - C5-DSR-2023

Item Breakup - C6-DSR-2023

Item Breakup - C7-NS Items

Providing and injecting Acrylic Gel for sealing of Litre active / moving cracks, joints and voids in RCC / masonry structures, including cleaning of cracks, drilling of holes, fixing of injection packers, pressure injection of approved acrylic gel system using suitable pumps, sealing of surface after injection, removal of packers, finishing complete as directed by Engineer-in- Charge, conforming to manufacturer's specifications and Railway standards, including all labour, materials, tools, tackles, scaffolding, curing and incidentals, completeEngineer-in- Charge.

Providing and injecting 2-component, low Kg foaming, flexible Polyurethane (PU) resin (resin + hardener mixed in 1:1 by volume) into joints, moving cracks and voids in RCC / masonry structures, including surface cleaning, drilling of holes, fixing of injection packers, pressure injection using suitable 2-component electrical / pneumatic pumps, sealing of surface, removal of packers, finishing complete as directed by Engineer-in-Charge and as per manufacturer's specifications, including all labour, materials, tools, tackles, scaffolding and incidentals. HYDERABAD DIVISION-ENGINEERING/SOUTH CENTRAL RLY

Providing and injecting 2-component, low Kg foaming, flexible Polyurethane (PU) resin (resin + hardener mixed in 1:1 by volume) into joints, moving cracks and voids in RCC / masonry structures, including surface cleaning, drilling of holes, fixing of injection packers, pressure injection using suitable 2-component electrical / pneumatic pumps, sealing of surface, removal of packers, finishing complete as directed by Engineer-in-Charge and as per manufacturer's specifications, including all labour, materials, tools, tackles, scaffolding and incidentals

Providing and fixing Flexible Polyolefin (FPO of RM 150mm wide) waterproofing tape over cracks, joints and interfaces, including surface cleaning and preparation, application of approved 2-part epoxy based thixotropic adhesive, pasting and pressing of FPO tape, edge sealing, curing, finishing complete as directed by Engineer-in- Charge and as per manufacturer's specifications, including all labour, materials, tools, tackles, scaffolding and incidentals. Total 2580629.80