Karnataka

AOC

Works

Buildings

Annual repair works of the quarters located within the premises of the Public Works Department No.-1 Sub-Division, Shivamogga office, and the CH-01 quarters building located within the Circuit House premises

Public Works Department

PWD Special Division Office Shivamogga | Shivamogga, Karnataka

Amount: ₹16.5 LCloses: 8 Jan 2026Closed

Timeline

Published1 Jan 2026
Closed8 Jan 2026
Awarded—

Bids

1 Bid8 Jan 2026

#	Company	Amount	Status
1	PAVAN B K ₹14.1 Laccepted-aoc	₹14.1 L	accepted-aoc

Tender Value

₹16.5 L

EMD Value

₹41,300

Closing Date

8 Jan 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

VIJAYAKUMAR Y N

Office Number

Work Description

Annual repair works of the quarters located within the premises of the Public Works Department No.-1 Sub-Division, Shivamogga office, and the CH-01 quarters building located within the Circuit House premises.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT30926

Reference Number

PWD/2025-26/BD/WORK_INDENT30926

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Special Division Office Shivamogga

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredThe tenderer should be a KPWD Class-4 and above registered Contractor

RequiredEMD for Rs. 0.413 Lakhs shall be paid through e-procurement only.

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23 , 2023-24 and 2024-25 a. achieved in at least two financial years an Average of annual Financial Turn over -in all Clauses of Civil Engineering Construction Works only of Rs.16.51 Lakhs, in all classes of Civil Engineering Construction works only

RequiredTo qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of Standard Tender Document attached to this tender.and also upload Scan copy of pan card, Valid GST registration certificate & also upload address proof certificate-Aadhar Card/DL/Pass port etc.. contractor should mention valid Email ID, communication Address, Phone Number properly

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP-Portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should Follow strictly prevailing rules of labour act.

The tenderer should be a KPWD Class-4 and above registered Contractor

Work sanctioned under head of Account 2216- BUILDING MAINTENANCE

Conditional tenders will not be accepted.

The Tenderer should submit the scanned copy of the last 5 years balance sheet indicating the civil work contract receipts certified by the chartered accountant. Submit the balance sheet indicating the contract receipts certified by the chartered accountant with UDIN No/Auditor & Tax consultant with their registration no, who ever is applicable. & Contractors should have Registration of GST.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

To qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of Standard Tender Document attached to this tender.and also upload Scan copy of pan card, Valid GST registration certificate & also upload address proof certificate(Aadhar Card/DL/Pass port etc..) contractor should mention valid Email ID, communication Address, Phone Number properly

The bidder shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPPP portal.

Only Original documents to be scanned and uploaded, Executive Engineer reserves the right verify the Original Documents before approval, original documents/Certificate for qualification shall be produced when called for during evaluation of tender.

All the Formats prescribed in the bid Documents shall be filled in Complete manner.

The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got tested by the Quality Control Authority before use on the work and contractor should carryout additional test required if insisted by Engineer in charge of work at his own cost.

The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labour, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount seperately. And Increase in GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per Common SR 2023-24 CONTINUED FOR 2025-26 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24 (As per Government order FD 417 EXP-12 2024 dated 09/08/2024). Therefore, amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Separately at stage of Draft Tender Schedule Process for Over All amount put to Tender, tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Hence the bidder has to quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

The Employer reserves the rights to accept any Tender and to reject any or all Tenders as per Standard Tender Document Clause 22.

The Tenderer should maintain the Building during defective liability period of upto 1 years

Tender shall obtain the work done Certificate in the prescribed format from the Competent Authority no below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Tender. The Original Certificate shall be produced at the time of Opening of Technical Bids for Physical Verification, If sought.

Bidder should upload the bid capacity calculated as per KW-1, tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

The Successful bidder has to follow the prevailing Government orders regarding Royalty charges. The Contractor has to submit an MDP Certificate along with the running contractor bills. Otherwise the Department will take necessary action as per the government Orders/Circulars.

Any deviation/erroe/mistakes found in units of items, they should be read as unified SR 2023-24 (Continued to 2024-25) and the rates shall be quoted accordingly

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The contractor should be responsible for all deduction of the labours wages as per the Labour Act.The Public Works Department will not be held responsible for the same.

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

EMD for Rs. 0.413 Lakhs shall be paid through e-procurement only.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23 , 2023-24 and 2024-25 (a) achieved in at least two financial years an Average of annual Financial Turn over (in all Clauses of Civil Engineering Construction Works only) of Rs.16.51 Lakhs, (in all classes of Civil Engineering Construction works only)

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹41,300

Important Dates

Last Activity

8 Jan 2026

Published

1 Jan 2026

Download Ends

5 Jan 2026

BOQ Preview

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Floor painting with floor enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remov...

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and constructing laterite size stone masonry in CM 1:6 using available Laterite Stone including cost and conveyance of materials (except Laterite), curing etc complete as per specification I...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing Mangalore Ridge tiles set in C.M. 1:2 and pointed with C.M. 1:2. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

•

Removing and fixing Old Mangalore tiles on existing reepers. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

•

supplying and fixing new Mangalore tiles on existing reepers. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Repairing and fixing shutters (panelled or glazed) to doors, windows,

•

ventilators and cupboards. ---- including cost and conveyance of all materials with hire charges of machinery and equipme...

•

Repairing door and window frames with available wood to the required

•

size. ---- including cost and conveyance of all materials with hire charges of machinery and equipments, with all lead

•

polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...

•

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plasti...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional ...

•

Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surfa...

•

Providing and fixing precoated galvanised steel sheet roofing accessories

•

0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly clean...

•

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

•

Providing and fixing door latch with necessary screws etc complete. - Oxidised mild steel door latch ---- including cost and conveyance of all materials with hire charges of machinery and equipments,...

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Tower Bolts 200x10mm ---- including cost and conveyance of all materi...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Lowering, laying true to line and level of PVC Ringtite / PVC Pipes and cuts of pipes wherever necessary including jointing of pipes and specials with jointing of approved type, with all labour with e...

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75MM TEE ---- including cost and conveyance ...

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110MM TEE ---- including cost and conveyance...

•

Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 160MM TEE ---- including cost and conveyance...

•

Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC BEND(BWSSB SR 2023-24/Vol 5 ...

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC Elbows (BWSSB SR 2023-24/Vo...

•

Supply and delivery at site special moulded variety OPVC compatible fittings as per IS 16647- 2014 and fabricated as per standards with ISI mark with its latest amendments.(BWSSB SR 2023-24 Vol 5 P.no...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and constructing of Machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the c...

•

Repairs to Machine hole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaste...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

section 3 Qualification information.xls

Others - section 3 Qualification information • 0.03 MB

Bid document - 30926.doc

Others - Bid document • 2.67 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

PAVAN B K

₹14.1 Laccepted-aoc