17/EDC(BLP)/2024-25

Amount

Loading, Unloading and safe cartage of the following materials from Electricity Store Centre, Balrampur to the work site/dump site (Distance up to 70 km)

11 KV TPMO with Polymer Insulator.

11 KV 3-Phase fuse set.

Other line materials.

Bore type Pipe Earthing of 10 MVA & 05 MVA Power Transformer & Pannel as per RESSPO norms.all material provided by the contractor for completion of works(40'feet depth with all materials.).

Chemical Earthing with all material provided by the contractor.(250/400 KVA T/F)

Pipe Earthing :- 40' depth bore Type earthing with all material provided by the contractor(Pipe 40' lenth with 2" dia & MS Strip etc.) (100,250,400 T/F)

Earthing of poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastening with Gl wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr.above from the plinth of the support. All type nut & bolts would be given by the contractor.

Providing & Fixing of Exhaust Fan.

Fixing of 11 KV TPMO with Polymer Insulator.

Fixing of 11 KV 3-Phase fuse set.

Repairing of T/F plinth with all material provided by the contractor. As per RESSPO norms.

Shifting of existing T/F from old plinth to other place & remounting of T/F after completion of t/F plinth.

Repairing of 10 MVA Power T/F plinth with all material provided by the contractor. As per RESSPO norms.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Painting of CT, Breaker & Isolator's Structure and Control Room Painting. All materials will be provided by the contrector.as per RESSPO Norms.

Providing & Fixing of LED Light with stand fitting (50 watt.)

Repairing of 33 KV control Pannel 10 MVA power Transformer. All materials will be provided by the controctor as per RESSPO Norms.

Repairing of Various type works different sub-station.

Welding of ST Pole.All materials will be provided by the controctor as per RESSPO Norms.

Repairing of Plinth with fencing for 250 KVA & 400 KVA.of different location. All materials will be provided by the contrector.as per RESSPO Norms.

Decentralized Items:-Providing and fixing of following materials sanctioned Estimate/Package as per RESSPO U.P.P.C.L. drawing/ norms.(where is required).

Tublight with fitting

Table

Chair

Inverter 24V.

Almira.

Rubber Mat 3x6feet.

R.S. INDUSTRIAL WORKS

MS JANMEJAI SINGH CONTRACTOR

SHRIMATI RUPWATI CONTRACTOR