REPAIRS / MAINTENANCE OF SECURITY WALL, BOUNDARY WALL AND FENCING UNDER AGE B/R (CENTRAL) AT COLABA, MUMBAI

Amount

Dismantling fencing wire / mess any type, any description complete all as specified and directed.

Dismantling RCC Post any section, including taking out embedded portion and making good disturbed ground; posts embedded in natural ground complete all as specified and directed.

Dismantling structural or mild steel work including doors, gates but excluding framed trusses complete all as specified and directed.

Supply and fixing Galvanised, 2 strand, steel barbed wire fencing, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed (each line wire to be measured).

Supply and fixing in repair Galvanised, concertina coil of 610 mm dia made of 0.5 mm thick 19 mm wide strip and 2.59 mm dia high tensile wire 125 Nos of clips having 50 Nos of circle and covering 6 running mtr and 5 clips per spiral using a central core of high tensile wire around which a tape of rezor sharp barbes machine crimped etc complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

Material and labour for Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

Material and labour for Rolled Mild Steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., not exceeding 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only chain link mild steel galvanized fencing, any type or size complete all as specified and directed.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) mixed with WPC @ 3% by weight of cement surface finished even and fair complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only integrel water proofing compound complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in CM (1:6) complete all as specified and directed.

All as per item No 14 but expect bricks (using old bricks obtained from demolition).

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debries out side MoD land complete all as specified and directed.

Material and labour for providing plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use of necessary form work complete all as specified and directed.

Material and labour for preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed.

Material and labour for Ornamental and intricate design framed work of rolled mild steel conforming to Fe-290 (Gde E-165) as in doors or gates including cutting, bending in required shape & design, welding etc framed & hung including pintle hinges, stops, Hand made sliding bolts etc complete all as specified and directed.

Material and labour for providing precast RCC jalli & pillars with cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate, thickness of RCC jalli 35 mm (measured solid) including all mouldings & frame, set in cement mortar (1:4) to precast pillars grooves and including reinforcement of 4mm dia annealed wire @ 100 mm c/c spacing on both side alongwith pillars decorative round dome type on top of size 75 x 75 mm with reinforcement 4 mm dia annealed wire 4 Nos with stirrups 4 mm dia @ 150 mm c/c spacing and one number 8 mm dia TMT bar at centre including dismantling of old RCC jalli and pillers complete all as specified and directed.

All as per item No. 20 above but except pillars.

Supply and fixing in repairs 3mm thick panel of any type, pattern and shape Aluminium Composite Panel (ACP), aluminium thickness of 0.5mm, Front side finish of aluminum roll coated with Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions complete all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.

Material and labour for preparing old painted brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of floor coat emulsion paint PLATINUM SERIES complete all as specified and directed. Make : INDIGO or Equivalent as approved by GE.

Material and labour for Granite stone (of any type), 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid / fixed over and including rendering 10mm thick in CM (1:4), cutting & polishing and dismantling of old Granite stone, complete all as specified and directed.

Moulding (Sandwitch moulding) of granite slab edges including polishing etc complete all as specified and directed.

Material and labour for exterior wall tiles 6 to 8 mm thick, area not exceeding 0.06 sqm each tiles etc set & jointed in cement and pointed in coloured cement to match the shade of tile, fixed over and including 10mm thick rendering or backing layer in cement mortar (1:4) and dismantling of old unserviceable tiles with screed bed complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and and applying one coat of weather proof acrylic exterior paint (100% Acrylic, Apex Ultima protek, Make : Asian Paints) through authorized applicator only complete all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints, as approved by GE.

Material and labour for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek (Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only complete all as specified and directed. Make: Asian Paints / Berger Paints / Nerolac / Shalimar paints, as approved by GE.

SAI SIDDHI CONSTRUCTION

SHIV ENTERPRISE

industrial suppliers

Nagma Enterprises

Vandan Enterprises

Shivam Enterprises

Bidder Name

SN CONSTRUCTION

Vandan Enterprises

SAI SIDDHI CONSTRUCTION

industrial suppliers

Shivam Enterprises

Nagma Enterprises

SHIV ENTERPRISE