Modernisation of CRS in TNCSC owned /Rent free shop No.5 at Anna Street, Thondi Road and Shop No.4 at Arasanoor Samathuvapuram in Sivangangai District.

Amount

CIVIL WORK

Schedule -A Modernisation of CRS in TNCSC owned /Rent free shop No.5 at Anna Street, Thondi Road in Sivangangai District. Chipping the plastering and roughening the surface as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M sand in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Reinforcement Cement Concrete 1:1 ½ :3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. In foundation and basement upto 4.50M height

In ground floor upto 4.50M height above basement.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should nclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Column footing, Plinth beam , top tie beam etc.,

Lintel, Beam & Roof slab

Column and sunshade

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

BRICK WORK in cement mortor 1:5(one cement, five sand) using best quality Country bricks of size 8" 3/4"x4 ¼ x 2 ¾ “ for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers. In foundation and basement

In Ground floor upto4.50M above basement

PLASTERING with cement mortor 1:5 (one cement and five sand)12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and three sand)10mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for aneling wherever necessary and as directed by the departmental officers)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing M.S Grill to special windows and ventilators using 20mmx6mm angle including cost of MS grill, one coat of red oxide primer and fixing in position etc. complete complying with Standard Specification and as directed by the departmental officers

Supplying and fabricating and fixing in position of mild steel door with double shutters using M.S.angle of size 40x40x6mm for outer frames and 35x35x5mm for shutter frames, with bottom 1/3rd M.S Sheets of 18 gauge with M.S flate of size 32.x6for internal stiffners and top 2/3rd grilled including one number of aldrop, two numbers of tower bolts, hold fast , hinges, handle etc., including two coats synthetic enamel paint over one c Dismantling Reinforced cement concrete and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.oat of primer. The rate shall inclusive of cost of all materials.

Supplying and fixing of UPVC (Up-plasticized poly vinyl choloride) louvered ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60 x78mm both profiles are reinforced with GI/ 1mm 125 GSM and 100% corrosion free, the profile are multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black colour ) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiation pin headed glass 4mm thick should be provided to the louvers. The Ventilator should be fixed to the wall with 100% packing with screws silicon packing allround the frames. The Ventilator should got approved from the Executive Engineer before use on work.

White washing two coat with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the wall with one coat of interior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Painting the walls with two coats of exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers.

Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers. 110mm dia PVC pipe

Supplying and fixing of 110mm dia PVC rain water down fall pipes of including cost of PVC specials fixing them in position with necessary shoes, bends, clamps, TW plugs, screws, nails etc., complete. As per standard specifications

Supplying, laying and jointing PVC pipes (having working pressure 10 kg / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

Supplying and fixing 110mm dia PVC Elbow with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 110mm dia PVC Tee with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 110mm dia PVC Bend. With working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Elbow with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Tee with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC coupling with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25x20mm dia PVC Reducer with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Hex Nipple with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of 25mm dia with ISI make including cost of shellac, thread balls, etc., complete. 25mm Gate valve.

Supplying and fixing in position of best Indian make PVC Water Tank of 500 litres capacity confirming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications.

Servicing the rolling shutter including changing clips, applying patties, bearing adjustment cleaning and grease applying, locking slids adjustment kerosene washing etc., complete as directed by the departmental officers.

Painting old iron work with one coat of synthetic enamel paint of approved quality and colour over one coat of primer in all floor including cost of scaffolding, brushes etc., complete complying with standard specification and as directed.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification and as directed by the departmental officers

Schedule -B Modernisation of CRS in TNCSC owned /Rent free shop Shop No.4 at Arasanoor Samathuvapuram in Sivangangai District . EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M sand in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed..

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Reinforcement Cement Concrete 1:1 ½ :3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. In foundation and basement upto 4.50M height

In ground floor upto 4.50M height above basement.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should nclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Column footing, Plinth beam , top tie beam etc.,

Lintel, Beam & Roof slab

Column, sunshade.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

BRICK WORK in cement mortor 1:5(one cement, five sand) using best quality Country bricks of size 8" 3/4"x4 ¼ x 2 ¾ “ for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers. In foundation and basement

In Ground floor upto4.50M above basement

PLASTERING with cement mortor 1:5 (one cement and five sand)12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and three sand)10mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for aneling wherever necessary and as directed by the departmental officers)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing M.S Grill to special windows and ventilators using 20mmx6mm angle including cost of MS grill, one coat of red oxide primer and fixing in position etc. complete complying with Standard Specification and as directed by the departmental officers

Supplying and fabricating and fixing in position of mild steel door with double shutters using M.S.angle of size 40x40x6mm for outer frames and 35x35x5mm for shutter frames, with bottom 1/3rd M.S Sheets of 18 gauge with M.S flate of size 32.x6for internal stiffners and top 2/3rd grilled including one number of aldrop, two numbers of tower bolts, hold fast , hinges, handle etc., including two coats synthetic enamel paint over one c Dismantling Reinforced cement concrete and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.oat of primer. The rate shall inclusive of cost of all materials.

Supplying and fixing of UPVC (Up-plasticized poly vinyl choloride) louvered ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60 x78mm both profiles are reinforced with GI/ 1mm 125 GSM and 100% corrosion free, the profile are multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black colour ) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiation pin headed glass 4mm thick should be provided to the louvers. The Ventilator should be fixed to the wall with 100% packing with screws silicon packing allround the frames. The Ventilator should got approved from the Executive Engineer before use on work.

White washing two coat with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the wall with one coat of interior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Painting the walls with two coats of exterior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers.

Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers. 110mm dia PVC pipe

Supplying and fixing of 110mm dia PVC rain water down fall pipes of including cost of PVC specials fixing them in position with necessary shoes, bends, clamps, TW plugs, screws, nails etc., complete. As per standard specifications

Supplying, laying and jointing PVC pipes (having working pressure 10 kg / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

Supplying and fixing 110mm dia PVC Elbow with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 110mm dia PVC Tee with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 110mm dia PVC Bend. With working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Elbow with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Tee with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC coupling with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25x20mm dia PVC Reducer with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Hex Nipple with working pressure 10Kg/Sqcm of approved quality as directed by the departmental officers.

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of 25mm dia with ISI make including cost of shellac, thread balls, etc., complete. 25mm Gate valve.

Supplying and fixing in position of best Indian make PVC Water Tank of 500 litres capacity confirming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications.

Painting old iron work with one coat of synthetic enamel paint of approved quality and colour over one coat of primer in all floor including cost of scaffolding, brushes etc., complete complying with standard specification and as directed.

Supply and fixing precast RCC ring of 1.5M dia, 5CM thick and 30CM depth with 20mm HBGS jelly including cost of materials, reinforcement, labour charges for fixing in position etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing Reinforced cement concrete precast slab 50mm thick in Cement Concrete 1:2:4 (One cement, two crushed stone sand and four jelly) using 20mm HBG stone jelly including cost of Reinforcement, moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One cement and three sand) to full depth of slab etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification.

P SELVARAJ (BID ID -1356222)