CONSTRUCTION OF C C ROAD FROM BUS STAND TO KAROSHI MAIN ROAD SC COLONY AT UMARANI VILLAGE IN CHIKODI TALU

CONSTRUCTION OF C C ROAD FROM BUS STAND TO KAROSHI MAIN ROAD SC COLONY AT UMARANI VILLAGE IN CHIKODI TALU

Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means

Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading asper design mixing in a mechanical mix plant at OMC, carriageof mixed Material to work site, spreading in uniform layerswith motor grader on prep...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Formwork ;Percentage on finished rate of concrete per m3, As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate a...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying ...