ADDN/ ALTN TO OFFICES (QTY-03) AND ITS ASSOCIATED WORK AT BI-25 AND SPL REPAIR/ REPLACEMENT OF EXISTING FOUR POLE STRUCTURE AND 500 KVA DG SET ALONGWITH ITEMS NEAR OTM POWER HOUSE INSIDE VIJAY DURG UNDER GE (VD) KOLKATA

(B/R PORTION) Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in1:4 cement mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Vitrified ceramic tiles dark shade/double charged/ultra charged of 9 or 10 mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4. complete all as specified and directed.

As per item no 05 , here-in-before but as in skirting on vertical surfaces including screed bed 10 mm thick for wall tiling etc. in cement mortar 1:3 complete all as specified and directed.

M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, including screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:4 all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7/600x 300x 7mm thick as on vertical surfaces such as wall, dado, skirting etc set and jointed in neat cement slurry and pointed in colour cement to match including screed bed10 mm thick for wall tiling etc. in CM 1:3. complete all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in1:4 cement mortar complete all as specified and directed.

M&L RCC (nominal mix) type B1 1:2:4 (20 mm graded stone aggregate) using cills, steps, plinth courses, string course, coping and other similar bands etc complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, all as specified and directed.

M&L for preparation of new surfaces and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work/ concrete on ceiling surfaces in CM 1.3, finished fair & even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of ceiling and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separetly . )

Supply only integral water proofing compound all as specified and as directed.

M&L for preparation and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over 2 mm thick exterior wall care putty of new surfaces, all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 , type B0 using 12.5 mm graded aggregate as in sub base for floor complete all as specified and directed.

M&L for 18-20 mm thick Granite slab of approved quality (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick for laying floor finishes in CM 1:4.as specified.

S&F 18- 20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM(1:3) including dismantling old one completed all as directed.

M&L for Providing edge moulding to 18-20mm thickness of granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified.

Material and labour for providing Plain Cement Concrete(1:5:10) type E2 using 40mm graded aggregate as in sub base of floor all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, wooden flooring of any thickness including cover fillets complete all as specified

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. including 6mm dia Gl (upto 1200mm length) hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of Gl flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long complete all as specified.

Providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screw as per manufacturers instructions. All as specified and directed.

M&L for POP ceiling cornice of 4-6 inch width with approved design all as directed and specified.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.all as directed and specified.

Taking down aluminum frame with shutters of any description nexc 1.50 sqm each. complete all as specified.

Taking down aluminum frame with shutters of any description exc 1.50 but n.exc 2.0 sqm each, complete all as specified.

S&F anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F Powder coated anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified.

S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (01 No) hinges type B-21 100 mm long (2 No) suitable handles etc. complete all as specified.

S&F Powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattem, with approved standard section and fixed to the existing window frame with C.P brass/ stainless steel screws @ 200 mm centre to centre. including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Supply and fixing in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3. universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

Supply and fixed double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheed foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F in repair 150 mm over all length of cover plate of floor door stopper of Brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed

M&L for sheet glass 4.80mm thick ordinary quality obscured or frosted on one side and in square exec 0.5 Sqm in each pane glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed.

S&F 4.8mm thick plain sheet glass ordinery quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified

Supply and fixing in repairs 12 mm thick plywood, grade BWR. type BB. fixed to existing wooden surfaces with nails, complete all as specified and as directed.

M&L solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm each and not exceeding 4 sqm removing from the site complete all as specified and directed.

S&F factory made single extruded WPC (Wood polymer composite) solid door/ window / ceosetory windows & other frames/chowkats of size 65x100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm², modulus of elasticity 900 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasterners of required dia and length complete as per direction of Engineer-in-Charge, (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F Butt Hinges medium weight cold rolled stainless steel 100mm long complete all as specified

S&F aluminum anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed

S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as directed

S&F Aluminum aodised sliding door bolts of 250mm long with hasp and staple(bolt type) and fixing clips of sheets cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed

S&F 4 lever Mortice lock of brass, vertical type, size 100 mm including Handles, plates and all connecting items as specified.

S&F Table Top Basin Thin Rim, Shape - Triangular having Size: 600x410x100 mm. (Make :- Jaguar cat no LYS-WHT-38901N or equivalent brand).

S&F CP waste coupling 32 mm size half thread with 130 mm height to be fixed in Urinals and Basins all as directed and specified. (MAKE : JAGUAR, Cat no. ALD-709L130/ PARRYWARE or equivalent make specified in tender.

S&F chromium plated bottle trap 32 mm size with 300mm and 190 mmlong wall connectionpipes and wall Flange all as directed. (MAKE : JAGUAR, Cat no. ALD-769L300V190/ or equivalent make specified in tender.

S&F PVC connection 450 mm long of PTMT 15 mm bore complete all as specified and directed

S&F CP Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses. (MAKE : JAGUAR, Cat no. COP-167BPM/ or equivalent make specified in tender.

S&F in repair chromium plated 2 way bib cock all as directed. (MAKE : JAGUAR, Cat no. ARI-39041/ PARRYWARE or equivalent make specified in tender.

S&F Chromium plated health fauset (hand shower) with 8 mm dia, 1.2 mm long flexible tube & wall hook with NRV (back flow preventer) all as directed. (MAKE : JAGUAR, Cat no. ALD-577/ PARRYWARE or equivalent make specified in tender.

S&F CP soap dispenser with glass bottle all as specified and directed. (MAKE : JAGUAR, Cat no. AKP-35735P/ PARRYWARE or equivalent make specified in tender.

S&F Glass Shelf 600 mm long (with Bracket) as specified and directed. (MAKE : JAGUAR, Cat no. AKP-35771P/ PARRYWARE or equivalent make specified in tender.

S&F CP Double Arm Wall Mounted Reversible Plain / Magnifying (X3) Pivotal Mirror as specified and directed. (MAKE : JAGUAR, Cat no. ACN-1193N/ PARRYWAREor equivalent make specified in tender.

S&F in repair Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel as specified and directed. (MAKE : JAGUAR, Cat no. ACN-1181FHS/ PARRYWARE or equivalent make specified in tender.

S&F in repair White Water closet ( Rimless Bowl For Coupled WC) With UF Soft Close Slim Seat Cover, Hinges, Conversion Bend, Fixing Accessories and Accessories Set, Size: 385x645x815 mm, P/S Trap (With Conversion Bend). all as specified and directed.(Make :- Jaguar cat no. ONS-WHT-10753NS250UFSM or equivalent make specified in tender.

S&F in repair CP Toilet Roll Holder as specified and directed. (MAKE : JAGUAR, Cat no. ACN-1151N/ PARRYWARE or equivalent make specified in tender.

S&F in repair 15 mm bore CP Angular Stop Cock with Wall Flange as specified and directed. (MAKE : JAGUAR, Cat no. ACN-1151N/ PARRYWARE or equivalent make specified in tender.

S&F in repair CP Towel Ring Square with Round Flangeas specified and directed. (MAKE : JAGUAR, Cat no. ACN-1121N/ PARRYWARE or equivalent make specified in tender.

S&F in repair 15 mm bore CP Pillar Cock Auto Closing Systemas specified and directed. (MAKE : JAGUAR, Cat no. PRS-031/ PARRYWARE or equivalent make specified in tender.

S&F in repair 15 mm bore CPWall Mixer 3-in-1 System with Provisionb for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (with Hand Shower) as specified and directed. (MAKE : JAGUAR, Cat no. SOL-6281/ PARRYWARE or equivalent make specified in tender.

S&F in repair 15 mm bore CP Overhead Shower ø105mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System as specified and directed. (MAKE : JAGUAR, Cat no. OHS-1719/ PARRYWARE or equivalent make specified in tender.

S&F in repair 15 mm bore CP Soap Dish Holder as specified and directed. (MAKE : JAGUAR, Cat no.AKP-35731P/ PARRYWARE or equivalent make specified in tender.

Taking up or down 15 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed.

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including brass elbows,Tank adapter, union and Brass Tee's as required complete all as specified and directed.

S&F Stainless steel curtain rod including decorative end Plugs.(rod having minimum diameter of 25 mm) all as specified and directed.

S &F Stainless steel brackets(Wall to wall/normal any type) for curtain rod in pair of 2. all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 litres including dismantling of existing tanks complete all as specified and directed.

S&F Monoblock water pressure pump set of capacity 0.50 HP single phase, discharge range 26-60 Lpm, working in voltage range 1.4-2.4 (bar) complete including closed discharge valve and connected fittings complete all as speciifed and as directed. Make :- KILOSKAR-ETERNA, model SJPBS 42420-HL or equivalent make specified in tender.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed

M & L for preparation of surfaces of walls and applying two coat of Oil Bound Distemper over a coat of alkali resistant primer and 1 mm thick wall care putty after complete removal of existing treatment, all as specified and directed.

M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of surfaces and pasting of wall paper of any design/pattern/shade complete all as specified and directed. Make: asian (brand-nilaya) or equivalent in berger/nerolac

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including elbows,Tank adapter, union and Tee's as required including taking down old 20 mm GI pipe. complete all as specified and directed.

(E/M PORTION) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed.

M & L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches, sockets, fan regulators etc for the following

All as per item No 86 above but one light point or one fan point or bell point controlled by one switch

All as per item No 86 above but one 3 pin socket outlet, 5 Amp independent

All as per item No 86 above but one 3 pin socket outlet, 5 Amp on the same board with other switches

All as per item No 86 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

All as per item No 90 above but using 4.0 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 4.0 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A- 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Bell push 6A, 1 module complete all as specified and directed.

S & F Modular Fan step regulator, 120W- 2 module complete all as specified and directed.

S & F Bell , AC, 230 Volts, single pole complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 12 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 12 module complete all as specified and directed.

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

S & F in repair Recess mounting LED Slim round down lighter made of PDCAL with high efficient LEDs & Glare free opal diffuser,IP20 15W complete all as specified and directed. Make: Havells EDGEPRORDDLR15WLED857S or equivalent make specified in tender.

S & F Socket for AC short circuit protection motor starter with MCB DP 25 Amps capacity AC 230 Volt with Plug Top with Indicator complete all as specified and directed.

S&F in repair adjustable bed side LED lamp with clear lens with color temperature 3000 K suitable for 3 W metal and synthetic material lumen 150lm complete all as specified and directed.Make :Cat No 48042/30/31 of Philips or equivalent make specified in tender.

S & F LED decorative Wall lights fitting 4 W x 2, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable E-14 LED 4w X2 complete all as specifide and directed. Make: PHILIPS 32033/11/66 Aquafit wall light(Chrome and Metal,12W)-DC or equivalent make specified in tender.

S&F picture LED lights with color temperature 3000 K suitable for 10 W metal and synthetic material lumen 500 lm complete all as directed.

Supply, Laying, jointing and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole incl necessary thimbles complete all as specified and directed for the following sizes and cross sectional area :- (Note :- Necessary earth work to be measured and paid separately.

25 Sqmm, 4 core

35 Sqmm, 3.5 core

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and includin PVC casing-caping of suitable size, surface type all as directed.

All as per Srl. Item No. 114 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.

All as per Srl. Item No. 114 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed.

S & F TP&N Vertical Loadline Dbs are fitted with Bus Bars, Neutral Links, Blanking Plates 12 way double door DB LL 4W DD VERT W/O MCCB complete all as specified and directed.

S & F MCCBs 415V, 16KA, 4 Pole 100Ampscomplete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus bar complete all as specified and directed.

Supply only MCB 'C' series single pole and Neural 32 Amps, breaking capacity 10KA, complete all as specified and directed. Make :Cat No 408587-95, make: Legrand or equivalent make specified in tender.

Supply only MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed.Make: Cat No 408587-95,of Legrandor equivalent make specified in tender.

Disconnecting of HT/LT connection of Transformer and Shifting the Transformer to MT Yard as per site requirement with help of hydra/Lifting machine and connect the HT/LT connection complete all as specified and directed by Engr - in - charge.

Supply only in repair HT bushing including gasket suitable for transformer of capacity 315 KVA to 400 KVA as required at site all as directed (for three phases)

Supply only in repair HT bushing including gasket suitable for transformer of capacity 200 KVA to 250 KVA as required at site all as directed (for three phases)

Supply only in repair of LT bushing including gasket suitable for transformer of capacity 315 KVA to 400 KVA as required at site all directed (for three phase & neutral)

Supply only in repair of LT bushing including gasket suitable for transformer of capacity 200 KVA to 250 KVA as required at site all directed (for three phase & neutral)

Supply only in repair of breather assembly complete with silica gel for transformer from above 300 KVA upto 400 KVA of any make, type and capacity or make complete all as specified and as directed.

Supply only in repair silica gel for transformer of any make, type and capacity or make complete all as specified and as directed.

M&L for Painting of transformer 63 KVA to 500 KVA applying two coats of synthetic enamel paint of grey colour by spraying complete including preparation of old surfaces, removing & cleaning of oil/grease all as specified and directed by Engineer in Charge.

De-hydration and filtration of transformer oil by using dehydration and filtration plant, heating and filtration of oil to be carried out till the di-electric strength reaches 50 KV to 60 KV withstand for one minute is achieved of any capacity of transformer complete all as specified and as directed.

Supply & Filling of transformer oil in transformer in situ/at site for toping up the level of oil having dielectric strength 60 KV during filling after filtration conforming to IS-335 of make- POWER/INSOLE/UNIVERSAL/SAVITA

Supply and fixing steel tubular swaged pole 11 metre long complete with cast iron base plate finial taper plug ,bolts, nuts and secrew all as specified type 410, SP-55 (11 metres long) ISI Marked , complete with cast iron/ MS base plate , finial tapper plug,bolts,nut washers and screws as required duly painted with two coats of epoxy based paint alumimium grade finish to remaining external surface over one coat of suitable primer complete all as specified and as directed by Engr-in-Charge Note: fixing ,excavation and foundation concrete will be measuredand piad for sepearetly.

Supply, fixing and repair of MS Cross arms, bracings, supports etc. incl nuts, bolts, washers, welding, bending, drilling inclusive of two coat aluminium paint over a coat of red oxide primer after preperation of surface including taking down old steel members complete all as specified and directed.

M & L for hardcore of gauge exc 63 mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 using 40 mm graded crushed stone aggregate complete all as specified and directed by the Engineer-in-Charge.

Disconnecting HT/LT connection of transformer and opening up the top cover of transformer of capacity 500 KVA to 750 KVA for checking the conditions to carryout repairs and Overhauling, including draining out oil from the transformer in suitable container (containers to be provided by the contractor) and repair to the transformer with replacement of parts (as required) , checking the lead connection from winding to bus rods including necessary soldering/jointing etc and after complete repair refilling the dehydrated oil, replacing perished gasket with new gasket of same size and testing on full load after connecting the HT/LT connections as per instructions of relevant BIS code complete all as directed by Engr-in-Charge.

All as per item No 139 above but capacity of transformer 315 KVA to 400 KVA

All as per item No 139 above but capacity of transformer 200 KVA to 250 KVA

All as per item No 139 above but capacity of transformer 75 KVA to 160 KVA

Relaying XLPE Under Ground Cable after rectified the defects (Cable obtained from Item No. 1.0 here-in-before) 6600 Volt grade, Cross sectional area 70 Sqmm to 300 Sqmm, 3 Core including Jointing and Testing, complete all as specified and as directed. Note - Necessary earth work to be measured and paid separately.

Supply and laying including taking down of XLPE insulated (UE), screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 6.6 KV grade, cross sectional area 120 Sq mm, 3 core complete all as specified and as directed.

Supply and laying including taking down of XLPE insulated (UE), screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 6.6 KV grade, cross sectional area 300 Sq mm, 3 core complete all as specified and as directed.

Supply, jointing and testing of cable jointing kit for 6.6 KV(UE) grade cable for outdoor termination heat shrink type joint complete with jointing materials and accessories suitable for 3 core XLPE armored Aluminium conductor cable of size 240 - 400 Sqmm and including preparation of burnt out HT cable complete all as specified and as directed.

Supply, jointing and testing of cable jointing kit for 6.6 KV(UE) grade cable for indoor termination heat shrink type joint complete with jointing materials and accessories suitable for 3 core XLPE armored Aluminium conductor cable of size 70 - 120 Sqmm and including preparation of burnt out HT cable complete all as specified and as directed.

Supply, jointing and testing of cable jointing kit for 6.6 KV (UE) grade cable for indoor termination heat shrink type joint complete with jointing materials and accessories suitable for 3 core XLPE armored Aluminium conductor cable of size 240 - 300 Sqmm and including preparation of burnt out HT cable complete all as specified and as directed.

Supply, jointing and testing of cable jointing kit for 6.6 KV(UE) grade cable for straight through heat shrink type type joint complete with jointing materials and accessories suitable for 3 core XLPE armored Aluminium conductor cable of size 120 - 185 Sqmm and including preparation of burnt out HT cable complete all as specified and as directed.

Supply, jointing and testing of cable jointing kit for 6.6 KV(UE) grade cable for straight through heat shrink type type joint complete with jointing materials and accessories suitable for 3 core XLPE armored Aluminium conductor cable of size 240 - 300 Sqmm and including preparation of burnt out HT cable complete all as specified and as directed.

Excavation in trenches manually without using of JCB not exc 1.5 m wide and not exceeding 1.5 m depth for foundation laying of cables etc and getting out in soft loose soil complete all as specified and as directed.

Returning filling including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soil complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point as in soil complete all as specified and as directed.

Material and labour dry river sand as in sand cushioning to under ground cable including punning down complete all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and as directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts of cross sectional area 400 Sqmm, 3.5 core complete all as specified and directed.

Supply and fixing of HDPE pipe 80 mm dia , PE 80 IS: 14333 grade, working pressure 10 KGF/CM2 including taking out old unserviceable one complete all as specified and as directed.

Supply and fixing 100 mm bore galvanized iron pipe (light grade) with all fittings, fixed complete to wall / ceiling or laid in floor including taking down old unserviceable GI pipe complete all as specified and as directed by the Engineer-in-charge.

M&L for Cable jointing kit for 11 KV (E)/6.6KV (UE) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed.

M&L for Cable jointing kit for 11 KV (E)/6.6KV (UE) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and as directed.

Taking down of serviceable LT Cable of different size from Building wall and fixing in cable tray complete all as specified and as directed.

Supply and fixing of Hot Dipped Galvanised(Z+) Wiremesh cable tray outdoor type with wire dia from 3.9 mm to 5.9 mm of size 3000mm x 105mm x 300mm, including supports. It shall be manufactured with a longitudinal 'T' welded safety edge. Trays shall be constructed with 50 mm / 100 mm mesh configuration. Accessories for coupling and making 'T's and bends CE25/CE30 screw based system combination must be used and mounting accessories are required of same finish of same manufacturer as per the site requirement (celing/wall mounted). Trays should comply standard EN ISO14 61: at least 550 hrs. of SST. The deflection of cable tray must be within 1/200-th of the distance between two supports and tested in accordance with the standard IEC 61537. Wire cable trays must be designed with an optimum span of 1.5 mtr., taking into account the maximum load carring capacity as authorised by the manufacturer. Assembly with fire ressitant properties must have an E30/E90 certificate. The loading capacities of the brackets and the hanger torques must be tested in accordance with the standard IEC 61537. No hot work for trays is allowed at site. MAKE: LEGRAND (CABLOFIL)/ COPE/ LEVITON/ PANDUIT

M&L for ERDN Coupler for jointing two cable trays with fixing arrangements KI TASTER complete all as specified and directed. Note : KI Taster will be measured and paid separetely.

M&L of KI Taster for jointing of two cable tray with the fixing arrangements complete all as specified and directed.

M&L of mounting support RCSN 3000 for cable tray compete all as specified and directed.

M&L of cable tray cover of 2 meter length joints with fixing clip complete all as specified and directed. Note : Clip will be measured and paid separetely.

M&L of Clip for joint of cable tray cover complete all as specified and directed.

Supply, Laying and testing for replacement of XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall with saddles/Flat iron clamps as per site requirement /passing through pipe/pole complete of the following sizes and cross sectional area :- (Note :- Necessary earth work to be measured and paid separately.

120 Sqmm, 3.5 Core

S&F in repairs of MCCB 4 Pole, 415 V, Adjustable type 630 Amps with breaking capacity 50 KA with all accessories incl taking down existing MCCB complete all as specified and directed

S&F in repairs of MCCB 4 Pole, 415 V, Adjustable type 400 Amps with breaking capacity 36 KA with all accessories incl taking down existing MCCB complete all as specified and directed

Supply and fix (in replacement) MCCB, 4 pole, 36 KA, with thermal maganetic release range, 315 - 320 amps, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed. (Make: L&T, Cat No - CM98403OOQOOG / LEGRAND, Cat No: 4220 06 / HAVELLS, Cat No: IHBA9EMF0350 / C&S, Cat No: CSE3M400ATM4P_320 or equivalent model in SCHNEIDER / ABB / INDO ASIAN (OPTI POWER) / HAGER)

S&F in repairs of MCCB 4 Pole, 415 V, Adjustable type 250 Amps with breaking capacity 36 KA with all accessories incl taking down existing MCCB complete all as specified and directed

S&F in repairs of MCCB 4 Pole, 415 V, Adjustable type 160 Amps with breaking capacity 36 KA with all accessories incl taking down existing MCCB complete all as specified and directed

Supply and fix (in replacement) MCCB, 4 pole, 25 KA, with thermal maganetic release range, 100 amps, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed Make - L&T type DN0-100C Cat No - CM91712OOKOOG, Havells Cat No IHA13EBF0100# or equivalant make specified in tender.

Supply and fix (in replacement) MCCB, 4 pole, 25 KA, with thermal maganetic release range, 63 amps, Ics=100% of Icu with all accessories incl taking down existing MCCB complete all as specified and directed Make - L&T type DN0-100C Cat No - CM91712OOHOOG, Havells Cat No IHA13EBF0063 or equivalant in C&S/Schneider.

Supply and fixing in repair Motorised Changeover switch open execution type, 415V, 3 phase 4 pole 125 Amps with AST Controller with wire harness to be fixed on existing panel board all as directed by Engr-In-Charge Make : L&T Cat Part No. CK90161B000 + CK901920000 or equivalant make specified in tender.

Supply and fixing in repair Motorised Changeover switch open execution type, 415V, 3 phase 4 pole 200 Amps with AST Controller with wire harness to be fixed on existing panel board all as directed by Engr-In-Charge Make : L&T Cat Part No. CK90161B000 + CK901920000 or equivalant make specified in tender.

Supply and fixing in repair Motorised Changeover switch open execution type, 415V, 3 phase 4 pole 400 Amps with AST Controller with wire harness to be fixed on existing panel board all as directed by Engr-In-Charge Make : L&T Cat Part No. CK90161B000 + CK901920000 or equivalant make specified in tender.

Supply and fixing in repair Motorised Changeover switch open execution type, 415V, 3 phase 4 pole 630 Amps with AST Controller with wire harness to be fixed on existing panel board all as directed by Engr-In-Charge Make : L&T Cat Part No. CK90161B000 + CK901920000 or equivalant make specified in tender.

Dismantling/Disconnecting electric connection of underground HT XLPE cable 6.6 KV upto 70 to 300 sqmm from both sides and locating the fault in HT Cable upto 01 KM with fault locating machine the entire length complete testing after reconnecting and commisioning of cable complete all as specified directed

M&L for taking down unserviceable turbo chager including replacing of existing size & type and refixing turbocharger suitable for DG Set 500 KVA to make DG Set Functional complete all as specified and directed.

Matrial & labour for taking down unserviceable turbo chager including replacing of existing size & type and refixing turbocharger suitable for DG Set 250/125 KVA to make DG Set Functional complete all as specified and directed.

S&F of Feeder Pillar Box of size 60x60x45 Cm, made out of CRCA Sheet 3.0mm thick, Outdoor, Pedestal type, Weather Proof, Epoxy based Powder Coated Paint, Self-Closing Door having with Locking Arrangement, mounted on brick work Platform of size 100x100x60 Cm with plastering, comprising with 4 No. Aluminium Bus-bar of current rating 400 Amp with and including 1 no. MCCB 200 Amp 25 kA, 4 Pole, complete all as specified and as directed.

S&F Cable Route Indicator made out of Cast Iron plate 80 mm dia fixed with MS angle iron 40x40x6mm having 60 Cm long showing MES HT Cable Size with voltage with two coats of synthetic enamel paint in brown colour over one coat of primer necessary Earth Work and Cement Concrete 1:2:4 (20mm graded crushed stone aggregates) Block of size 20x20x20 Cm including Taking out Unserviceable Cable Route Indicator, complete all as specified and as directed.

Material, Labour in repair of earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below the normal ground level, connected with and including galvanized earth strip of size 32 x 6mm thick connected to main test point as directed as earthing lead by means of nuts, bolts, washers of galvanized iron protected by 40mm dia (light grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (medium grade) watering pipe including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @15 cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternative layers including necessary excavation and earth work in soft/ loose soil all as shown in Electric Plate No. 3 of SSR Part - I and testing on complete all as specified and directed.

Supply and fix Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6 mm dia GI Strip complete all as specified and as directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

Please Enable Macros to View BoQ information