Underground pipeline project for utilization of treated water for irrigation

FINANCIAL BID NO.: DSWC/SBS/2026-27/09

Underground pipeline project for Utilization of treated water for Irrigation at S.T.P Rahon (3 MLD) , Distt. Shaheed Bhagat Singh Nagar, Punjab

Rates for Civil Works (Approved by CCS Punjab Chandigarh)

Name of the Firm/Bidder

Phone Number of Bidder Email id of Bidder

Total Estimated Amount of Work Rs.

Quoted by Contractor (As % less of Estimated Amount) Quote (+/-%)

Estimate sanction no 3596 Dt 19/02/2026 Amount 1,23,03,300/-

Work no 1 (a) Providing, Laying, Jointing and excavation of trenches with backfilling of complete pipeline system

S.No. Particulars Qty Unit Rate Amount

1 Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals providing & fixing cations boards

a Earthwork upto 1.5m depth for all classes of soil except rocky 5298.4 cum 93.78 Rupees Ninety-Three and Seventy-Eight Paise Only

2 Providing laying fixing & Jointing of ISI Marked H.D.P.E Pipes as per ISI-4984-1995 casting along the trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

a H.D.P.E 200mm o/d pipe of 4kg/cm2 PE-80 5557.5 Mtr 1137.72 Rupees One Thousand One Hundred Thirty-Seven and Seventy-Two Paise Only

2.1 Providing laying fixing & Jointing of ISI Marked H.D.P.E Pipes as per ISI-4984-1995 casting along the trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications

a H.D.P.E 400mm o/d pipe of 4kg/cm2 PE-80 20 mtr 4464.5 Rupees Four Thousand Four Hundred Sixty-Four and Fifty Paise Only

3 Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.

a For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15(E)(F) 5557.5 mtr 22.76 Rupees Twenty-Two and Seventy-Six Paise Only

4 Supply & Installation of Alfa-Alfa valve (HDPE)

a 200 mm. Dia.. (by DSWC) 45 each 1034 Rupees One Thousand Thirty-Four Only.

b Anti theft Mechanism 45 each 638 Rupees Six Hundred Thirty-Eight Only.

c CC 1:2:4 for anti theft 1.35 cum

5 Providing & fixing single air valve ISI Marked as per IS-14845 including jointing all carriages complete.

a C.I Double air valve (Size 50mm)(For 200 mm dia HDPE PIPE) 15 Each 2515.51 Rupees Two Thousand Five Hundred Fifteen and Fifty-One Paise Only.

6 Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

a Supply & Jointing of 50 mm. Dia. G.I. Pipe(3mts for each ARV ) 45 mtr 721.9 Rupees Seven Hundred Twenty-One and Ninety Paise Only.

7 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI

a 200mm i/d Sluice Valves flanged 2 each 15241.75 Rupees Fifteen Thousand Two Hundred Forty-One and Seventy-Five Paise Only.

8 Providing,Stringingout, cutting, Jointingand testing of ISI MarkedD.I. Double Flanged pipeswithscrewed flangedasper IS:8329 2000, Class-K9 and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

a 200mm i/d pipe lines laid complete 20 mtr 3774.64 Rupees Three Thousand Seven Hundred Seventy-Four and Sixty-Four Paise Only.

9 Constructing brick masonry manhole in cementmortar1:5(1cement :5coarsesand )R.C.C. topslab20cmthickusingM-20mix byusingmixerandvibrator, TMTFe500@ 80.00kg/per cum, foundationconcrete1:4:8 mix (1 cement: 4 coarse sand : 8 graded stoneaggregate40mmnominal size) inside plastering12mmthickwithcementmortar1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1cement : 2coarsesand : 4graded stoneaggregate20mmnominalsize)finished witha floatingcoat of neat cement,Orange colouredPVCstepsincludingRCCcoverwith frame complete as per standard design complete in all respects.

a Inside size 90x150 cm and 120 cm deep 2 Each 23966.07 Rupees Twenty-Three Thousand Nine Hundred Sixty-Six and Seven Paise Only

10 Supplying, Laying, Testing and Commissioningof ISImarkedBUTTERFLY VALVEPN1.6,withGunmetal seal dulyISI markedcomplete withrubber insertion,nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications.

a 200 mm i/d 5 each 9401.9 Rupees Nine Thousand Four Hundred One and Ninety Paise Only.

Work no 1 (b) Civil works for pump room

1 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. 32.03 Cum 191.74 Rupees One Hundred Ninety-One and Seventy-Four Paise Only.

2 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type 5.97 Cum 4219.19 Rupees Four Thousand Two Hundred Nineteen and Nineteen Paise Only.

3 Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 m 4.8 Cum 344.49 Rupees Three Hundred Forty-Four and Forty-Nine Paise Only.

4 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. 10.84 Cum 6074.59 Rupees Six Thousand Seventy-Four and Fifty-Nine Paise Only.

5 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 13.49 Cum 6864.71 Rupees Six Thousand Eight Hundred Sixty-Four and Seventy-One Paise Only.

0.9 Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded 3.88 Sqm 348.71 Rupees Three Hundred Forty-Eight and Seventy-One Paise Only.

6 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 22.8 Qtl 7920.15 Rupees Seven Thousand Nine Hundred Twenty and Fifteen Paise Only.

7 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). 36.18 Sqm 221.24 Rupees Two Hundred Twenty-One and Twenty-Four Paise Only.

8 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) 49.36 Sqm 502.52 Rupees Five Hundred Five and Fifty-Two Paise Only.

9 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. 30.84 Sqm 400.33 Rupees Four Hundred and Thirty-Three Paise Only.

10 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. 39.45 Sqm 560.46 Rupees Five Hundred Sixty and Forty-Six Paise Only.

11 First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. 14.5 Cum 6121.26 Rupees Six Thousand One Hundred Twenty-One and Twenty-Six Paise Only.

12 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing 33.81 Sqm 802.51 Rupees Eight Hundred Two and Fifty-One Paise Only.

13 12.5 mm thick cement plaster 1:5 181.5 Sqm 194.1 Rupees One Hundred Ninety-Four and Ten Paise Only.

14 12.5 mm thick cement plaster 1:4 33.81 Sqm 202.52 Rupees Two Hundred Two and Fifty-Two Paise Only.

15 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 215.31 Sqm 84.28 Rupees Eighty-Four and Twenty-Eight Paise Only.

16 Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface 215.31 Sqm 22.12 Rupees Twenty-Two and Twelve Paise Only.

17 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 215.31 Sqm 126.42 Rupees One Hundred Twenty-Six and Forty-Two Paise Only.

18 Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material 24 Sqm 789.07 Rupees Seven Hundred Eighty-Nine and Seven Paise Only.

19 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material 10.63 Sqm 424.56 Rupees Four Hundred Twenty-Four and Fifty-Six Paise Only.

20 Floating coat of 1:5mm thick neat cement laid in one operation to the topping 24 Sqm 30.55 Rupees Thirty and Fifty-Five Paise Only.

21 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge 8.3 Mtr 244.41 Rupees Two Hundred Forty-Four and Forty-One Paise Only.

22 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge

a UPVC 110 mm bend 4 Nos 142.22 Rupees One Hundred Forty-Two and Twenty-Two Paise Only.

23 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 2 Each 100.08 Rupees One Hundred and Eight Paise Only.

24 Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position. 2 Each 133.79 Rupees One Hundred Thirty-Three and Seventy-Nine Paise Only.

25 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS code : 15658(2006) 10.63 Sqm 679.51 Rupees Six Hundred Seventy-Nine and Fifty-One Paise Only.

26 Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate. 26.25 Kg 93.76 Rupees Ninety-Three and Seventy-Six Paise Only.

27 Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with dia 2.52 Sqm 4108.65 Rupees Four Thousand One Hundred Eight and Sixty-Five Paise Only.

28 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) 140 Kg 134.85 Rupees One Hundred Thirty-Four and Eighty-Five Paise Only.

29 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area 8.82 Sqm 629.99 Rupees Six Hundred Twenty-Nine and Ninety-Nine Paise Only.

30 Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. 8.82 Sqm 954.47 Rupees Nine Hundred Fifty-Four and Forty-Seven Paise Only.

31 Applying priming coat with metal primer on new steel or iron work including preparation of surface. 2.52 Sqm 25.28 Rupees Twenty-Five and Twenty-Eight Paise Only.

32 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade 2.52 Sqm 69.53 Rupees Sixty-Nine and Fifty-Three Paise Only.

Work no 1 (c) Civil work for sump well

1 Civil Works for sump well(Lump Sum) 1200000

Work no 1 (d) Complete pumping system

1 Providing fixing, commissioning an trail run of Mono Block Non clog pump set with panel board fuse box cable for connection from pump to panel within the pump room for 42 LPS discharge and 23 m head and power of 20 HP(as calculated in the head loss sheet), pipe work, cable and all accessories required to complete the job as per market rate. (Schedule item not considered as per market rate). 2 Set 844224 Rupees Eight Lakh Forty-Four Thousand Two Hundred Twenty-Four Only. 844224

2 Control panel with MS steel sheet fabricated, dust & moisture proof, mounted, rubber coated lining to prevent dust & moisture, duly painted with required breakers, contractors, meters. Voltmeters, ammeters, indicating lamps, etc. complete for running of motor pumpset. 2 Set 26550 Rupees Twenty-Six Thousand Five Hundred Fifty Only.

3 Flow meter with hard rubber liner with 10 meter cable. 1 Set 88000 Rupees Eighty-Eight Thousand Only.

4 Providing,Stringingout, cutting, Jointingand testing of C.I. Double Flanged pipes with casted flangedasper IS:7181,Class-B(ISI markedwiththepriorapprovalofEngineer-in Charge) and laying thesame in trenches to correct alignment andgradients,jointedwith nutboltsandrubber insertionfittedcomplete including all cartage. (dia 150mm) 90 Mtr Rupees Three Thousand Two Hundred Ninety-Nine and Three Paise Only.

5 Extra for fixing of double flanged pipes in vertical position for over head reservoir & stand pipes, scaffolding, derricks, Jim poles, tools and plants, ropes, guys, etc. Complete as desired by Engineer-in-Charge(dia 150mm) 50 mtr Rupees One Hundred Eighty-Seven and Fifty-Three Paise Only.

6 Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, includingjointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge).(a) Class PN-1 as per ISI (C) 150mm i/d Sluice Valves flanged 2 Each 8914.18 Rupees Eight Thousand Nine Hundred Fourteen and Eighteen Paise Only.

7 Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing, cost of nut bolts & rubber insertion all carriages complete. (e) C.I Single air valve screwed (Size 80mm) 2 each 4507.12 Rupees Four Thousand Five Hundred Seven and Twelve Paise Only.

8 Providing & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS-5312/2004 in pipe lines including jointing & cost of Nut Bolt, rubber insertion etc. complete. Note : If Non-return valves class PN-1.6 is used instead of class PN-1.0 than 5% will be paid extra.(B) Class PN-1.0 as per ISI with gun Metal flap(d) 150mm i/d Non-return valve. 3 each 9197.42 Rupees Nine Thousand One Hundred Ninety-Seven and Forty-Two Paise Only.

9 Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line pressure 15kg/cm2 & including connection with main panel etc. as required complete in all respect. 2 each 3799.27 Rupees Three Thousand Seven Hundred Ninety-Nine and Twenty-Seven Paise Only.

10 Providing and fixing S.S. Pressure Gauge complete as required complete in all respect (a) Dial diameter 150mm calibration 0-16 Kg 2 each 1082.59 Rupees One Thousand Eighty-Two and Fifty-Nine Paise Only.

11 Providing and fixing jointing cast Iron Food valves flanged ends with rubber sheet as per IS-4038 including cost of Nut Bolt, rubber insertion complete in all respect 150mm i/d Cast Iron Foot valves. 3 each 6530.52 Rupees Six Thousand Five Hundred Thirty and Fifty-Two Paise Only.

12 Providing & fixing Fire Hydrants with jointing including all carriages complete.(without Fire hydrant surface box) Size 80mm complete in all respect.(a) CI Fire Hydrants IS-908. 1 each 7133.17 Rupees Seven Thousand One Hundred Thirty-Three and Seventeen Paise Only.

13 Structure steel work in compound girders or Stanchion built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding, not etc. complete with flange plates, heads, sole plates, angle connections etc, with hoisting and erecting in position.

a For Suction Pipe installing and dismantling 2 pumps 1.25 Qtl 9394.28 Rupees Nine Thousand Three Hundred Ninety-Four and Twenty-Eight Paise Only.

1 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES : Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. Mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/25mm dia.(ISI marked) recessed in wall etc.complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100 watts, bell push, 6Amp, 2/3 universal socket (shuttered), 16/20 Amp combined/universal Socket(shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc. PVC connector(For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxex (Four way PVC1/1/2" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade(For 6Amp wall socket & plug control point) and other petty material etc, including the cost of above

a Wiring fan point (Without fan box) 2 each 1091.69 Rupees One Thousand Ninety-One and Sixty-Nine Paise Only.

b Wiring fan point (with Fan box) 2 each 1210.21 Rupees One Thousand Two Hundred Ten and Twenty-One Paise Only.

c Wiring light point 10 each 762.47 Rupees Seven Hundred Sixty-Two and Forty-Seven Paise Only.

d Wiring 6Amp wall socket point 2 each 618.93 Rupees Six Hundred Eighteen and Ninety-Three Paise Only.

e Wiring 16/20Amp power plug control point 1 each 478.03 Rupees Four Hundred Seventy-Eight and Three Paise Only.

2 PVC INSULATED FOR COPPER CONDUCTOR CABLE : Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS 694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge.

a Overall size 2.5sqmm (Un-sheathed) 100 mtr 36.98 Rupees Thirty-Six and Ninety-Eight Paise Only.

b Overall size 4sqmm (Un-sheathed) 100 Mtr 53.41 Rupees Fifty-Three and Forty-One Paise Only.

3 PVC, HDPE, PIPES & PVC FLEXIBLE PIPES : Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537-Part-III & HDPE pipes (ISI marked) as per IS 4984:1995 for wiring urposes including bends, junction boxes, Steel Hooks, M.S. saddle clamps and other petty materials etc, as per PWD General

a Heavy Gauge PVC Conduit Pipe 25mm dia (Flushed) 50 mtr 70.8 Rupees Seventy and Eighty Paise Only.

4 G.I. EARTHING : Earthing with G.I. wire/rope in G.I. Pipe party recessed and partly on surface complete with 150cm long 50 mm Dia G1 earth pipe (Cutting threads and 36Nos. Hotels, 1cm dia to make a mesh around the G1 pipe) with G1 reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg, charcoal & salt mixture etc, up to 8 metre in length (including boring & refilling).

a Earthing with 8 SWG(4mm dia) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mmx 15mm (upto 8 Metre in length) 3 each 3315.89 Rupees Three Thousand Three Hundred Fifteen and Eighty-Nine Paise Only.

5 XLPE INSULATED ARMOURED CABLES (LOOSE) : Supply , laying and erection of aluminium conductor XLPE insulatetd PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (part-1) 1988 to be laid loose in the existing trench or pipe as per PWD General Specifications.

a Overall size 95sq mm (4Core) Armoured (Loose) 200 Mtr 538.6 Rupees Five Hundred Thirty-Eight and Sixty Paise Only.

b Overall size 16sq mm (4Core)Armoured (Loose) 50 Mtr 161.98 Rupees One Hundred Sixty-One and Ninety-Eight Paise Only.

6 MINIATURE CIRCUIT BREAKERS : Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/415 volts 50cycles Acsupply with breaking capacity of 10KA, Curve-C and low wats losses as per IS/IEC 6089-1, energy limitation class-3 true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimles/lugs.

a MCB Single Pole 6-32amp(10KA, Curve-C) 6 each 190.58 Rupees One Hundred Ninety and Fifty-Eight Paise Only.

b MCB Single Pole 40amp(10KA, Curve-C) 1 each 395.38 Rupees Three Hundred Ninety-Five and Thirty-Eight Paise Only.

7 RCCB's : Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth Leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs.

a RCCB Double Pole 16/25amp, Sensitivity 30mA 1 each 1948.13 Rupees One Thousand Nine Hundred Forty-Eight and Thirteen Paise Only.

8 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's RCBO's/RCCB's

9 Supply and erection of sheet metal Double Door Distribution Boards IP 43 IK 09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 Suitable for flush mounting with fully insulated copper busbars,shrouded neutral bars, earth bars, cement spill protector,colorcoaded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no of ways for mounting miniature circuit breakers/RCBO's RCCB's in the distribution board (FOr SP&N distribution board with provision DP MCB's/RCCB's RCBO's as incomer and SP MCB's as outgoing and for TP&N horizontal distribution board with provision TPN/FP MCB's/RCCB's/RCBO's as incomer and SP MCB's as outgoing) as per PWD General specifications including connections with suitable size of thimbles and

a SP&N Double Door Distribution Board 8 way each. 1 1416.27 Rupees One Thousand One Hundred Sixty-Nine Only.

10 CABLE TRAY : Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x6mm thick to be fixed with fastners nut & bolts etc, complete in all respect as desired by the Engineer-in-charge and as per PWD General .

a Cable Tray Size 150mm x 50mm x50mm(2mm thick) 50 mtr 1066.35 Rupees One Thousand Sixty-Six and Thirty-Five Paise Only.

2 Digital Water Meter (Lumpsum) 1 Each 100000 Rupees One Lakh Only.

3 Auto Cut-off System (Lumpsum) 1 Each 35000 Rupees Thirty-Five Thousand Only.

4 Sign Board (Lumpsum) 1 Each 10000 Rupees Ten Thousand Only.

NOTE: The provision for the Sump Well has been made on a lump-sum basis. The detailed BOQ and approved item-wise rates shall be issued at the time of issuance of the Work Order, as per the vetted and approved estimate.