Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.0 LAccepted-Finance R O DIGGAR | L1 | Accepted-Finance As per BOQ comparative | |
| 2 | L2₹13.4 L+₹45,708.45 (3.53%)Accepted-Finance B 115 R O DIGGAR | L2 | Accepted-Finance As per BOQ comparative | |
| 3 | L3₹14.9 L+₹1.9 L (14.9%)Accepted-Finance LADAKH AUTONOMOUS HILL DEVELOPMENT COUNCIL LEH OFFICE OF THE EXECUTIVE ENGINEER RURAL ENGINEERING WING LEH | L3 | Accepted-Finance As per BOQ comparative |
Tender Value
₹14.9 L
EMD Value
₹29,800
Closing Date
8 Dec 2020, 4:00 pmClosed
Executive Engineer SSD Nobra
Executive Engineer SSD Nobra
Construction of DG Shed at Digger Nobra.under Capex.
2020_PWD_647_4
SSD/N/09 of 2020-21
Open Tender
Civil Works - Buildings
Item Rate
60 days
Nobra
Please refer to tender document.
6 documents required · 6 mandatory
₹1,000
Yes
Payable To Executive Engineer SSD Nobra
₹29,800
Yes
22 Dec 2020
25 Nov 2020
10 Dec 2020
25 Nov 2020
8 Dec 2020
25 Nov 2020
25 Nov 2020 - 8 Dec 2020
Amount
Earth work in excavati0n by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil
Providing and laying in position specified grade of cement concrete excluding the cost of centering shuttering finishing and reinforcement all work upto plinth level 1:4:8 (1cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size)Nallah. (including cost of cement carriage)
Dry stone pitching (any thickness) excluding cost of stones on horizontal.
Random Rubble masonry with hard stone from quarry in foundation and plingh including leveling up with cement concrete 1:6:12 (1cement: 6coarse sand: 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6( 1Cement: 6 coarse sand).incl carriage of cement.
Providing and laying DPC 50mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size)Nallah(including carriage of cement)
Reinforcement cement concrete works (any thickness)including attached pilaster buttresses plinth and string course filled columns pillars,piers,abutment,posts and struts etc upto floor five level excluding the cost of centering shuttering finishing and reinforcement all work upto plinth level 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size).Including carriage of cement.
Providing wood work in frames of door windows clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastener shall be paid for separately. (Budloo/fir wood). Including cost of carriage.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.Second kail wood 30mm
12mm Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked
Providing and fixing glazed shutter for doors, windows and clearstory windows using 10kg/Sqm (4mm thick) float glass panes including ISI marked M.S pressed butt hinges bright finished of required rings with screws (1st class kail wood).30mm
Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand .4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50 mmthick with 20mm nominal size stone aggregate.Nallah.including cost of cement carriage.
Reinforcement for RCC work incl. straightening, cutting, bending, placing in position and binding all complete (thermo Mechanically treated bars). Including cost of materials & carriage.
Centering and shuttering including strutting, propping etc and removal of form for. a. Lintels beams, plinth beams, girders, bressumers and cantilevers
b. Suspended floors roofs, landings balconies and access platform.
c. Edges of slabs and breaks in floor and walls under 20cms wide.
Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at end locks mounted on specially designed pipe shafts with brackets, side guides and arrangements for inside and outside locked with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters. 80 1.25mm M.S laths with 1.25mm thick top cover.
15mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement : 4 coarse sand).incl cost of cement carriage.
6mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand).incl cost of cement carriage.
Pointing on stone work with cement mortar 1 3 (1 cement : 3 fine sand)Flush Pointing.incl cost of cement carriage.
Providing and applying plastered of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
Distempering with ist quality acrylic washable distemper (ready made)of approved manufacture and of required shade/colour complete as per manufactures specification.
Applying priming coat with ready mixed pink or gray primer of approved brand and manufacture on wood work. (Hard and soft wood).
painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new works over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
Providing and fixing lSI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm
Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.250x10 mm
Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.150x10mm
Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:125 mm
Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm.
Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. a) All kind of soil .
Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of approved steel primeri Incl carriage all complete job.
Carriage of materials by M.T from source to site loading, unloading complete job. a. Stone an avg lead 02 km.
b.Stone agg an avg lead 18 km
M/S STANZIN CHOSZANG
M/S MOHAMMAD IBRAHIM
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .