REPAIR/CLEANING TO SEWAGE LINE AND DRAINAGE HARD STANDING BOUNDRY WALL FENCING PETTY REPAIR TO OTM AND MD ACCN UNDER AGE B/R I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with old size bricks built in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for old size brickwork, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacture instruction etc complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work and rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (Liquid) complete all as specified and directed.

Demolition of reinforced cement concrete of any description including removing rubbish off the premises within 50 meter all as directed.

M&L for Precast RCC 1:2:4 type B1using 20mm graded crushed stone aggregate as in manhole cover/septic/soak pit and similar works including necessary form work set in cement mortar 1:4 all as specified and directed.

M&L TMT bars 8mm dia, (Fe-500/ Fe-550D) cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed including formwork if required complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate in flooring complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation of drain or manhole in post as mass concrete complete all as specified and directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in loose/soft soil complete all as specified and directed.

Ditto all as per Srl Item No 15.00 here-in-before but for exc 1.5 mtr but not exc 3.00m deep

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Demolition / breaking up damaged SGSW pipe of any position of internal dia of pipe 150 mm including demolition of PCC, and removing dismantled material at a distance n exc 50 m all as directed

M&L for concrete bed PCC 1:4:8 type D-2 using 40mm graded stone aggregate to SWG drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land complete all as specified and directed.

M&L for salt glazed stone ware drain pipe grade 'A', 150mm bore laid on concrete bed and jointed complete all as specified and directed.

M&L for Reinforced concrete NP2 drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified and directed. (Note:- Excavation, earth work and concrete bed and haunching shall be measured and paid for separately)

Taking down 100mm CI soil water mains gutters pipes of any length any size including burning out joints and and cutting of holes where ever required all as directed.

S&F 100mm dia CI sand cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required complete all as specified and directed.

S&Fin repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and directed.

S&F in repairs PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed.

S&F salt glazed stone ware gully trap of size 150 x 150 mm to existing pipe line set in PCC 1:3:6 type C2 and jointed in cement mortar (1: 1) in repairs complete all as specified and directed.

S&F 100 mm cast iron floor trap in repairs with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified

M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash including preperation of suraces all as specified and directed.

Cutting into existing manhole for connecting new drain pipe of 150 mm bore and making good to pipe and rendering disturbed surface where drain pipe have been insereted cutting out existing benching for forming branch channel (1/2 round or 3/4 section as required) in cement concrete 1:2:4 type B1 and finished the surface even and smooth and reforming benching as required and directed by Engineer - in - Charge

Note for Cleaning of sewage line, manhole, Sump/septic tank, soakage well, trap etc: - (i) The contractor shall provide two safiwala to report at complaint cell/AGE BR-I office in the morning by 9:00 Hrs to receive day to day complaints. (ii) Complaint should be attend/completed within 48Hrs after receiving complaint slip failing which a panel recovery 50% of quoted amount shall be deducted form the executed quantities if not cleaned for the entire period of contract from contractor dues or become dues(i.e. RAR/FB) (iii) Cleaning shall be the responsibility of the contractor for the inter period of contract. (iv) Debris materials obtain from demolition/dismantling shall be removed from the site, outside Md land, Failing which a panel recovery from contractor Rs 500.00 per cum will be recovered from contractor dues or become dues (i.e. RAR/FB). (iv) The unit rates quoted by contractor in BOQ shall be deemed to include for above provision and no extra claim will be entertained by the Department at late date in this respect.

Disludging of 100 mm dia sewage line by roding or by other means from adjascent manhole complete all as directed by Engineer - in Charge.

Disludging of 150 mm dia sewage line by roding or by other means from adjascent manhole complete all as directed by Engineer - in Charge.

Disludging Man Holes by taking out sludge and foregin materials and excavating a pit of appropriate size depositing sludge in the pit and covering with 30 cm thick layer of soil to cover the sludge including removing surplus soil where directed by Engineer - in - Charge including sprinking of bleaching powder over the pits. ( a) Depth of manhole upto 2 Mtrs

Disludging Man Holes by taking out sludge and foregin materials and excavating a pit of appropriate size depositing sludge in the pit and covering with 30 cm thick layer of soil to cover the sludge including removing surplus soil where directed by Engineer - in - Charge including sprinking of bleaching powder over the pits. ( a) Depth of manhole upto 2 Mtrs n.exc 4 Mtrs

Disludging of sludge and other foreign materials complete from sump/septic tank and removing sludge to excavated pit of appropriate size (for buring of sludge and spreading the earth not exc 30 cm thick over filled sludge and removing surplus soil where directed at a distance not exc 50 m where directed Sump of capacity up to 500 users including sprinking of bleaching powder alround complete all as specified and directed..

M&L for brick work with old size fly ash bricks with sub class 'B' built in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for old size brickwork, old size fly ash bricks with sub class 'B', straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L for 25mm thick (measured solid) providing precast cement concrete 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate as in louvres and jallies including all mouldings set in CM1:4 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick wall or concrete surfaces, in CM 1:4 finished even and smooth surface without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on brick wall surfaces in CM 1:6 finished even and smooth surface without using extra cement complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer including preparing surface of cement base even and smooth complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) in natural ground any section, including taking out embedded portion and making good disturbed ground all as directed.

Dismantling posts or struts (wood, steel or R.C.C.) in cement concrete any section, including taking out embedded portion and making good disturbed ground all as directed.

Excavating in post holes ( or similar holes ) each n exc 0.5 cu m getting out , returning, filling in and ramming earth in a layer not exceeding 25cm watering and removing surplus soil to a distance n exc 50 m and making good surface soft/loose soil.

M&L plain cement concrete 1:4:8 type D-2 using (using 40mm graded crushed stone aggregate) as in foundation in post as mass concrete complete all as specified and directed.

S&F angle iron Post and struts in fencing including cutting tops to shape as directed drilling holes for bolting and notching for wires, flat iron fillet (for securing wire mesh) including all necessary drilling, bolting & riveting etc complete, conforming to Fe-290-0 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only mild steel in flat ,round or square bars,in available lengths as in line wire Fe 410-W (gde-E-250) quality-A complete all as specified and directed.

Supply only chain link MS galvanised fencing any type complete all as specified and directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc incl provision of binding wire complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossingg with and provision of galvanised wire, stapples or steel pins etc complete all as specified and directed. (Each line of wire to be measured).

S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossingg with and provision of galvanised wire, stapples or steel pins etc all as directed. (Each line of wire to be measured).

M&L for Preparation of newly untreated steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for PCC 75mm thick 1:4:8 type D 2 using 40mm graded crushed stone aggregates as in floor, path dtc finishing the surface rough to receive tilies complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300mmX300mmX 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed.

M&L for providing Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid on 25mm thick layer of sand well watered & rammed and jointed and pointed with grey cement and pigment complete all as specified and directed.

M&L for precast cement concrete 1:3:6 type C1 (using 20 mm graded aggregate) Providing, precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:6. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S & f framed work as in gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete contining to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

Taking down unservicable steel gate/shutter of any description of size n.exc 9 sqm each including taking out of unservicable parts/portion by cutting and replacing with new one as per the existing size and specification and refixing in the same opening by maintaining proper alignment including repairing defective portion of gate/shutter, steel structurre to match with exsiting structure including necessory cutting, drilling, welding and reveting etc, greasing, oiling to movable parts including all necessory fittings and appying one coat of synthetic enamel paint over a coat of pink primer to new portion/structure complete all as specified and directed.

Taking down unservicable steel gate/shutter of any description of size exc 9 sqm but n.exc 12 sqm each including taking out of unservicable parts/portion by cutting and replacing with new one as per the existing size and specification and refixing in the same opening by maintaining proper alignment including repairing defective portion of gate/shutter, steel structurre to match with exsiting structure including necessory cutting, drilling, welding and reveting etc, greasing, oiling to movable parts including all necessory fittings and appying one coat of synthetic enamel paint over a coat of pink primer to new portion/structure complete all as specified and directed.

Taking down unservicable steel gate/shutter of any description of size exc 12 sqm but n.exc 18 sqm each including taking out of unservicable parts/portion by cutting and replacing with new one as per the existing size and specification and refixing in the same opening by maintaining proper alignment including repairing defective portion of gate/shutter, steel structurre to match with exsiting structure including necessory cutting, drilling, welding and reveting etc, greasing, oiling to movable parts including all necessory fittings and appying one coat of synthetic enamel paint over a coat of pink primer to new portion/structure complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Note for serial item No 66.00 to 144.00: - (i) The under mentioned work listed in this schedule will be carried out in petty repair work nature after logging of complaint day to day by the users. The contractor shall provide (a) Carpenter-2Nos (b) Plumber-2 Nos with T&P including material to report at complaint cell/AGE BR-I office in the morning by 9:00 Hrs to receive day to day complaints. (ii) Complaint should be attend/completed within 48Hrs after receiving complaint slip failing which a panel recovery @ double the quoted rate of each complaint will recover from contractor dues or become dues(i.e. RAR/FB) (iii) Debris materials obtain from demolition/dismantling shall be removed from the site, outside Md land, Failing which a panel recovery from contractor Rs 500.00 per cum will be recovered from contractor dues or become dues (i.e. RAR/FB). (iv) The unit rates quoted by contractor in BOQ shall be deemed to include for above provision and no extra claim will be entertained by the Department at late date in this respect.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) area not exc. 1.5 sqm complete all as specified and directed

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each all as specified and directed

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing form site of work.

S &F Pressed steel frames frame size 165X60mm for doors with one or moe rebates including necessory fixing lugs, hinges, lock strike plates etc, complete, all as specified.

S&F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 2nd class HW glazed and skeleton 30 mm thick window shutters open rebated and prepared to receive glass, gauze etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) Window complete all as specified and directed.

S&F 35mm thick plain framed, panelled shutter (three panel) with lock rail and panel of 9mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing.

S&F Factory made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (Stiles), with 2,4, or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC sheet Polyurethane painted on the front face & 2 mm plain colour PVC sheet on back face with particle Board core complete all as specified and directed.

S&F mild steel sliding door bolts plate type 300mm bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100mm in size complete all as specified and directed.

S&F 150 mm aluminium handles cast type anodised complete all as specified and directed.

S&F mild steel barrel tower bolts of extruded section and fixed 200 mm size complete all as specified and directed.

S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F in repairs aluminium handle 150mm size cast type, anodised, ISI marked complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodised barrel tower bolts of extruded section all as specified (Make : As aper sample)

S&F in repairs stainless steel butt hinges medium weight 100mm in size complete all as specified and directed.

S&F in repairs steel window handles with complete fitting , peg stays & Hinges etc (Including welding if required) as per sample complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading complete all as specified and directed.

Easing of door/windows shutters of any size/any number of pannels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of lower bolts. Sliding bolts etc complete all as directed.

M&L for Welding in repairs of thickness of metal to be welded exc. 6 mm but not exc. 9 mm and not exc. 2.5 cm in length complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

S&F figured glass pin head type 4 mm thick and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

Taking down unserviceable Aluminium door/window shutters including taking out all unservicable parts, and repairing defective portion of shutter, and refixing in the same opening complete all as specified and dirtected.(Repairable items glass pane, mortice lock, mesh grill paid separately)

M&L 100x100mm size mesh aluminium anodised grills of approved designs complete all as specified and directed.

S&F mortice lock vertical type barss 100mm size 4 levers complete all as specified and directed.

S&F double action floor spring hydrualically regulated made up of minimum 12.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for 5.5 mm thick sheet glass ordinary quality frosted or one way including glazing clips, rubber packing etc exc. 0.5 sqm in each pane complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets any thickness, including cover fillets.

S&F 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

S&F Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over II class soft wood fillets and reinforced with G.I. wire mesh (Fillets and G.I. wire mesh paid separately) complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing and rubbish off the premises complete all as specified and directed..

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and incl15mm thick screed bed in CM(1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles joint free coloured 300 X 450 mm size 7mm thick on walls over and incl 10mm thick plastering in CM(1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

Dismantling PVC water tanks 1000 litres capacity.

Dismantling PVC water tanks 500 litres capacity.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed..

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified.

S&F of Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) complete all as specified and directed.

S&F in repairs Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms) complete all as specified and directed.

Taking down steel tubing and connection 15mm bore.

Taking down steel tubing and connection 20mm bore.

Taking down steel tubing and connection 25mm bore.

S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 15 mm all as specified and directed.

S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 20 mm all as specified and directed.

S&F G I tubing medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors bore of tube 25mm all as specified and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed.

Refixing the following old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.):-

15 mm bore

20 mm bore

25 mm bore

S&F in repairs small fittings galvanised iron medium grade such as sockets, elbow, nipple up to size 200 mm, tee, union etc for 15mm bore pipe (ISI Mark all as directed)

Ditto all as per Srl Item No 122.00 above but for 20mm bore pipe

Petty repairs to leaking in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern etc of any description including changing the washer etc all as specified.

Removal of air lock/blockage of water in GI tubing 15 mm/20 mm bore cleaning the pipe or fittings etc and refixing the same in position all as specified.

S&F in repairs 32mm dia PVC waste pipe flexible type for WHB 60cm long with union all as specified

S&F in repair 15mm bore CP cast copper alloy bib taps short body with wall flange fancy type complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated 32mm dia for wash hand basin all as specified

S&F in repair Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms) all as specified.

S&F Aluminium anodised towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repairs CP brass shower rose 125 mm dia complete all as specified and directed.

S&F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle flush pipe including brackets etc complete all as specified and directed.

S&F in repairs Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as directed ( Make : as per sample)

S&F in repairs plastic water closet seat cover white /colour, closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.

S & F in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP waste coupling 32 mm dia, PVC waste pipe 32 mm dia and other fittings all as specified and directed.

S&F in repairs pillar taps, 15mm bore fancy type, cast copper alloy with capston heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 15mm dia PVC connection with PTMT nuts of length 450mm complete all as specified

S & F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.

S&F in repair wash down water closet vitreous china pan pedestal pattern white including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair angle cock cast copper alloy fancy type , chromium plated screwed down , high pressure,with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore complete all as specified.

S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed.

S&F in repairs brass chrome finish health faucet with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 1,23,015.00 (refer Tender Srl Page No 45). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

MUKHERJEE ENTERPRISE

MS CHOWDHURY ENTERPRISE

NAYAK BROTHERS

M/S DUTTA CONSTRUCTION CO

M/S KAR CONSTRUCTION

UNIVERSAL CONSTRUCTION

M/S LOKENATH ENTERPRISE