Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.1 LAccepted-AOC | L1 | Accepted-AOC First Lowest | |
| 2 | L2₹49.8 L+₹31,706.50 (0.64%)Rejected-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | PEREN | NAGALAND | 797112 | L2 | Rejected-AOC Highest Rate | |
| 3 | L3₹49.9 L+₹37,933.50 (0.77%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-AOC Highest Rate | |
| 4 | L4₹51.8 L+₹2.2 L (4.51%)Rejected-AOC | L4 | Rejected-AOC Highest Rate | |
| 5 | L5₹56.6 L+₹7.1 L (14.4%)Rejected-AOC BR GADGIL ROAD PUNE MAHARASHTRA 411030 INDIA | PUNE | MAHARASHTRA | 411030 | L5 | Rejected-AOC Highest Rate |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
MAINT OF CIV WKS ASSETS AT 12 I R AND O FLT AND REPAIR MAINT OF BR AND EM ITEMS OF BLDGS OF GP IV UNITS LOC UNDER AGE BR II AT RMS
2022_MES_561321_2
8508/C/E8
Open Tender
Civil Works
Item Rate
335 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹98,000
4 Feb 2023
19 Dec 2022
9 Jan 2023
19 Dec 2022
7 Jan 2023
26 Dec 2022
19 Dec 2022 - 23 Dec 2022
Amount
B/R Portion Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified
Demoiliton of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for.
Demolition of cement concrete ground floor and paving nexc 15cm thick (below or above ground level )
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets
Dismantling boarding any description fixed in any position with nails
Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins , shelves and similar works.
Dismantling timber scantlings 40 sqcm and over in section unframed work
Dismantling timber fillets, rails , posts, rafters, purlines, etc. under 40 sq cm in section
S&F 2 mm solid thickness corrugated poly caronated sheet as in roof covering /cladding to wall fixed with self tapping screws as in repairs all as specified and directed.
M&L Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m on roof surfaces.The work will be carried out upto triple storey building & the rate for scaffolding is included in this item also.
S & F Pre-painted galvalume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S & F Pre-painted galvalume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
M&L 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.
M&L 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275
M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L or J type or cranked hooks.
M&L Asbestos cement one piece plain angular ridge 6mm thick
S&F asbestos cement plain building boards, 4mm thick, fixed to timber framework with screws ,complete all as specified and as directed.
M & L 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards .
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified.
M & L for block boards, 18/19 mm thick, grade 2 quality, interior grade , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and directed.
S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, for cup board including lipping / beading as required complete all as specified and directed.
M&L for external teak wood lipping 6 mm thick , fixed with nails on particle board 12 mm thick
S&F 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed by Engineer - in - Charge
M&L 30 mm thick 2nd class HW plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats.
M/L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.
M/L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.
M/L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified.
S&F steel windows or ventilators, fixed type, with glazing bars.
S&F mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing. Grame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge.
M&L in repairs GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste all as directed
S&F 0.71 mm thick plain aluminium sheeting , alloy 31000 H4 in ridges, hips , valley gutter , drip and straight flashing .
M&L walling of random rubble, uncoursed, well bounded, laid dry in retaining walls, abutments and similar work built in CM 1:6
M&L PCC type C1 1:3:6 (20mm graded aggregate) as in coping and like including weathering slightly rounded or chamfered angles and throating as directed
M&L riased pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4
M&L for cement concrete Type C-1 1:3:6 (20mm graded agg) as in Bond Stone and the like including weathering slightly rounded or chamfered angles and throating as directed.
M&L brick work with sub class' B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.
All as per item No 41 here-in-before but except brick built in cement mortar 1:6.
M&L 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces.
M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished fair and even, using water proofing compound in top layer , complete all as specified and as directed (NOTE: WPC will be measured and paid separately as "Supply only " here in after)
M&L rendering 10mm in CM 1:4 mixed with water proofing compound @ 3% by wt of cement on balcony, facia, roof projection and chajja etc. The work will be carried out upto tripple storey building the rate of scafolding is included for this item also. WPC will be measured and paid separately.
M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement.
Supply only integral water proofing compound ( ISI marked )
M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof kerbs / benching / coved fillets etc rounded or chamfered on edges.
M&L Pressure grouting of honey combed concrete with cement slurry by adding CEBEX 100 or equivalent @ 255 gms/50 Kg of cement.
Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m.
M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.
M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following -
Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.
One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.
One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame.
One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over polymeric membrane.
Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.
Material and labour for precast Cement Concrete chequered tiles of size 200 x 200 x 25mm thick as in floor, set and jointed in neat cement slurry and pointed with cement laid over and including 20mm thick screed bed in CM (1:4) and 75mm thick PCC 1:4:8, type D2, (using 40mm graded aggregate) as in sub base of floor complete all as specified and as directed.
M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified.
M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge.
M&L for 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor topping of hard standing finished even and smooth without using extra cement
M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate mixed with WPC (in proportion as per manufacturer's instruction) as in bedding in sunken portion of slab complete all as specified and directed.
M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' in 100mm thick concrete slab of hard standing all as specified and directed by Engineer-in-charge.
M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 all as directed .
M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 all as directed .
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.
All as per item No 62 here-in-before but as in skirting over and including 10mm thick cement plaster in CM (1:4) and ditto
S&F viterified ceramic tiles 10mm thick n.exc 0.36 Sqm each in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6all as specieid and directed.
S&F Viterified ceramic tiles 10mm thick n.exc 0.36 Sqm each in verticle surface as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick bedding layer in CM 1:4 all as specieid and directed.
M&L 25 mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone agg as in floor for laying floor finishes.
M&L for Granite (of any type) work (table rubbed and polished) 20mm thick in flooring over & including 15mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half mirror polish i.e. half granite polish as per local trade practice) all as specified & directed by Engineer-in-charge.
M&L cement concrete type C2 1:3:6 (40 mm graded agg) as in surface channels and drains
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms moulds
All as per item No 51 above but exceeding 30 cm inner girth upto and including 25 mm girth or part thereof
M&L Neeru finish to plastering as specified
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) 1:2 :4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately.
Reinforcement cement concrete Type B1 1:2:4 (12.5 mm graded stone aggregate) in chajjas and balconies.
Form work to shelves and the like including edges, surfaces finished rough
M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges fair finish
S&F Mild Steel TMT bar 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .
S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia
M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces.
M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall complete all as specified & directed . White washing shall be carried out using DDL..
All as per item No 80 here-in-before but on ceiling
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls all as specified & directed by Engineer-in-Charge
All as per item No 82 here-in-before but on ceilings .
M&L preparation of newly plastered surface of any description and applying two coat of plastic emulsion paint complete all as specified and as directed.
Preparation of old decorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge.
M&L for prepration of newly plastered surfaces of walls and applying two coats of weather coat exterior emulsion over a coat of primer , complete all as specified and as directed.
M&L preparation old plastered surfaces of wall and applying one coat oil bound distemper on walls complete all as specified & directed.
All as per item No 88 here-in-before but on ceiling
Preparation of old decorated plastered surface of any description and applying one coat of plastic emulsion paint complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.
M&l for preparation old decorated surfaces on wall and applying one coat of weather exterior acrylic emulsion wall paint, complete all as specified and as directed.
Complete removal of exisitng treatment on walls all as specified and as directed.
All as per item No. 93 here-in-before but on ceiling
M&L for prepration of old decorated surfaces and applying two coats of white wash on walls, fins, facia. Chajja etc , complete all as specified and as directed.
All as per item No. 95 here-in-before but on ceiling
M&L for preparation of old surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge.
M/L for 2 mm thick Birla white putty/JK white wall care putty on walls.
M&L for preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion of approved tint all as specified .
All as per item No 99 here-in-before but on ceilings .
M&L preparation of old plastered surfaces of walls of any description and applying two coat of plastic emulsion paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying two coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old painted steel surfaces not exc. 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of new steel surfaces of any description, n exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer.
M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. -
M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing and applying one coat of white wash on wall complete all as specified & directed . White washing shall be carried out using DDL.The work will be carried out upto tripple storey building the rate of scafolding is included for this item also.
All as per item No 109 here-in-before but on ceiling
Prepration of old painted surfaces of Brick, Stone, Concrete , Asbestos Cement or Plaster Surfaces and applying two coat of synthetic enamel paint all as specified and as directed.
All as per item No 111 here-in-before but on ceilings .
Prepration of old painted surfaces of Brick, Stone, Concrete , Asbestos Cement or Plaster Surfaces and applying one coat of synthetic enamel paint all as specified and as directed.
Solar control film 25 micron relfective type (garewater sun control or equivalent)
S&F 18/19mm prelaminated particle board, interior grade , preliminated both side with decorative choice limination fixed with screws to timber frame work .
S&F 12mm prelaminated particle board, interior grade , preliminated both side with decorative choice limination fixed with screws to timber frame work .
S&F 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on one faces; fixed with nails to timber frame work as wall panel.
Plain, solid, straight Chowkhats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints, supplied & fixed
Taking down chowkhat or frame not exc 1.5 sqm each (with out taking off shutters from the frame)
Taking down chowkhat or frame exc 1.5 sqm not exc 4 sqm each (without taking off shutters from the frame)
Taking down shutters of area n. exc 1 Sqm each.
Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each
Taking down & refixing shutters of any description n exc 1 Sqm each in same opening
Taking down & refixing shutters of any description exc 1 Sqm and n exc 2 sqm each in same opening
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.
Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc complete all as directed.
M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm thick
S&F 100 mm size cadmium plated stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed.
M&L butt hinges, medium weight 75 mm long size
S/F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm long
S&F Aluminium handle cast type anodised 150 mm long
S&F 125mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.
S/F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section (250 mm long)
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm.
S&F Aluminium (Die cast) body , Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed
M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones.
M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. .5 sqm each pane complete all as specified and directed upto triple storey .Rate for scaffloding/ladder is included in this item.
M&L plain fillets 2nd class Hard wood exc 13 & n exc 25 Sqcm Square or rectangular in section, wrought secured with nails or barbs
S/F 2nd class hard wood scantling as in purlins rafters ,& framed work etc clean sawn.
S&F 140mm Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed
S&F Brass hasp and staple,125mm safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws
S&F 40mm dia, brass cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
S&F in repairs for Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and rings etc.
Taking down existing steel sliding shutters size not excedding 4.00 x 5.00 m with all connecting items and repairs/ replace the locking arrangements, greasing, tightening of helical wire spring including welding wherever required, oiling, etc complete and make in serviceable condition and refixing in the same opening complete all as specified and directed by Engineer-in-Charge. (NOTE :- (i) Lock plate with locking arrangement and shall be measured and paid for separately. (ii) Spring will be measured and paid for separately (iii) Supply only unserviceable items shall be measured and paid separately under respective items.
Ball bearing for steel sliding shutters
Saftey lever locks mild steel with 4 leavers for rolling shutters
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates
M&L Taking down and Servicing, re-securing glazed aluminium door .exc 1.5 Sqm but n.exc 4 sqm each by easing, adjusting, securing of styles, mullions, pivots, cleats fittings including replacing worn out rubber packing, glazing clips, aluminium anodised snap beading, servicing locks including fixing only aluminium mongries etc and refixing in the same opening complete as required and directed .(Note : Defective Aluminium mongeries fitted/replaced shall be measured and paid seperately)
S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.
S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squares exc 0.5 sqm each
S&F Sheet glass ordinary quality 4.8 mm thick grounded or obscured or frosted , on one side and glazing in aluminum door in squares exc 0.5 sqm each
S&F Sheet glass ordinary quality 4.00 mm thick and glazing in aluminum window in squares n exc 0.5 sqm each
M&L stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm & fixed with stainless steel wire staples
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F 4 levers brass mortices lock, vertical type, size 100mm
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing.
Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing.
M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore.
S&F CPVC 16 mm outer dia pipes SDR 11 & plain CPVC SDR fittings pipe line to walls & ceilings or laid in floors complete all as specified
S&F CPVC 20 mm outer dia pipes SDR 11 & plain CPVC SDR fittings pipe line to walls & ceilings or laid in floors complete all as specified
S&F CPVC 25 mm outer dia pipes SDR 11 & plain CPVC SDR fittings pipe line to walls & ceilings or laid in floors complete all as specified
M&L dismantling water tank of exc 250 ltr and not exc 500 ltr Capacity.
S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .
S&F in repairs rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including 20mm dia ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning the complete inner surface by rubber/nylon scraper to remove sludge/silt and washing with bleaching power solution and then clear water, etc. and hoisting in postion if required reconnecting and re-fixing in position.
Taking down AC/Salt glazed ware pipes and fittings upto 100mm.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall
S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall
S&F of 110mm dia PVC (SWR) bends
S&F 75mm PVC(SWR) bends any radius with access door.
S&F of 75 mm dia PVC (SWR) Vent cowl
S&F of 110 mm dia PVC (SWR) Vent cowl
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof
S&F bands , straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stays) , heavy , for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts , wall ties, hooks for hanging fans, plain angles cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps , palte washers and similar small articles conforming to Fe 290 , Gde E- 165.
S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100 mm CI 'P' trap.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed.
S&F in repair PVC flushing cistern syphonic action type, 10 liters capacity, low level white with inlet ball valve, float and handle including bracket including PVC flush pipe, 32mm dia as fixed in repairs complete all as specified and directed. (Make : Hindware (Sleek)/Commander (Slim)/Parryware)
S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair, complete all as specified and directed.
S&F in repairs fancy type looking mirror with Aluminium/PVC moulding of size 400x550x5mm thick as approved by GE.
S&F in repairs Sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 600 mm long
S&F in repairs CP toilet paper holder as approved by GE.
S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed.
S & F bottle trap 32 mm dia of PTMT having Min water seal of 25mm Min wt 260- gms complete all as specified and as directed.
S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.
S & F in repairs waste coupling of PTMT (half or full threaded) 40 mm dia ,complete all as specified and as directed.
S & F 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/Sqcm fixed complete to walls, ceilings or in floor etc complete all as specified and directed.
S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed
S&F in repair fancy type pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore.
S&F in repairs vitreous china half stall urinal white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia.
S&F in repairs for 15mm dia of pipe bib taps (Short body)cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repair 15 mm dia bib tap long body cast copper alloy(fency type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated (concealed type long shank) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .
S&F in repairs for 15mm dia of pipe Angle valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .
Supply and fixing 20 mm dia gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete.
S& F in repair swivel shower of CP any size for fixing with 15 mm pipe (min weight 40 gms) incl shower arms 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (min weight 40 gms)
Supply and fixing in repairs of soap-dish chromium plated all as specified
S&F in repairs grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).
S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified.
S/ F in repairs towel Ring of PTMT fixed with and including Chromium plated Brass Screws and wooden/ plastic cleats ( Minimum weight 90 gms) etc fixed in kitchen.
S&F in repairs PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms)
S&F for depth 0.70m – 1.65 m, DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick PCC 1:3:6 type C-2 including packing under and haunching against the sides of pipes bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional all as specified and directed.
Cutting into existing manhole/soakwell/septic tank making good to pipe and benching cutting out existing benching for and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for internal dia size 150mm.
M & L Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop vulve boxes, gate stops,parts of ranges, bulusters and similar articles exc 5kg each
S&F MS Steel screw bolts (machine made) with hexagonal or square heads at one and screwed at other or screwed both ends each scrwed and to be fitted with washer and one hexagonal or square nut, exc 10cm and n exc 15cm long
All as per item No 217 here-in-before but exc 5 cm and n exc 10cm long
Dismantling of CI pipes 100mm dia.
Same as in item No 219 here-in-before but 75mm dia of pipes.
S&F Cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls, Stack clamps madeout of 50 mm by 3 mm flat iron, bolts & nuts, securing ends of stays to wall with antisyphonic pipes up to 4th storey high.
S&F Cast iron 100mm bore Bends (any radius), diminishing pieces or taper
S&F Cast iron 100mm bore Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches and aceess door complete.
S&F Cast iron 100mm bore cowls
S&F Cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls incl Stack clamps madeout of 50 mm by 3 mm flat iron, bolts & nuts, securing ends of stays to wall with antisyphonic pipes up to 4th storey high.
S&F Cast iron 75mm bore Bends (any radius), diminishing pieces or tapers
S&F Cast iron 75mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches
S&F Cast iron 75mm bore cowls
M&L for sealing and grouting the mouth of pipes using Fosroc's non shrink grout Conbextra GP2 or equivalent For 110 mm dia
All as in item No 229 here-in-before but 75 mm dia
S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F in repairs CP wall mixer (3 in 1) complete all as specified and direcated and as approved by GE.
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed.
Dismantling steel structural work such as rolling shutters , complete , all as specified and directed .
M&L for repairs to rolling shutters gear operated of area exceeding 8 sqm each including repair /replacement of brackets , door spring rod and greasing and overhauling complete all as specified and directed
S&F steel rolling shutters of lath thickness 1.25 mm , gear operated type with bevel gear box and crank handles area exceeding 8 sqm each all as specified including top cover, anchoring rod, hasp & staple including cutting and removing the existing corroded laths of rolling shutters and inserting new laths of 1.25 mm thick including necessary bending , revetting etc with one shop coat of red oxide zinc chromate primer complete all as specified and directed
Dismantling damaged/rusted MS framed work including watch tower pedestal railings , ladders etc by gas cutting or by other means carefully without damaging the structure upto a height of 10 mtr from GL of watch tower erect on GL.
MS framed work by welding/bolting wherever required in Compound girders and stanchions , lattice girders , aerial masts , staging for water tanks and the like including caps, bases , splices etc built up from two or more beam or channel sections or angles with plates , including all lattice bars , stiffeners , gusset plates etc upto a height of 10m from GL as in watch tower erected on ground.
S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0.
S&F mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing. Grame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete
MS Plates (Plain or chequred) channels , square cut or notched (ordinary and counter sunk) forming holes with rivited , bolted or welded attachments .as in watch towers and similar structure upto 10 m height.
E/M Portion Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.Make:-Richa/Finolex/Havells/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa
One light/Fan/Exhaust point controlled by one, one way switch .
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No 244 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5 Amp. Make:- Havells/Legrand/Anchor
M&L for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A flush type Make:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Havells/Legrand/Anchor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Anchor/Legrand/Havells
M&L for Bell AC 230 volts musical type.Make:-Anchor/Legrand/Kinjal
M&L for replacement of bell push switch 5 amps piano type flush type Make:-Anchor/Legrand/Kinjal
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with four runs of 10.00 Sq mm and one run of 10.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- four runs of 10 Sq mm + one run of 10 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Richa/Prestoplast/Finolex/supreme
All as per item No 254 here-in-before but sub main wiring with four runs of 6.00 Sq mm and one run of 6.00 Sq mm for earth wire NOTE:- four runs of 6 Sq mm + one run of 6 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Richa/Prestoplast/Finolex/supreme
All as per item No 254 but sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Richa/Prestoplast/Finolex/supreme
All as per item No 254 but sub main wiring with two runs of 2.5 Sq mm and one run of 4 Sq mm for earth wire NOTE:- two runs of 2.5 Sq mm + one run of 2.5 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Richa/Prestoplast/Finolex/supreme
M&L for LED flood light 150 Watt capacity with high luminious efficiency made up of Epoxy powder coated pressure die cast aluminium housing with elegantly designed heat sink for efficient thermal management, sturdiness and excellent corrosion resistant and lens embedded PC cover having Top Opening seperate driver compartment with IP 66 protection and High quality toughened glass IK07 with 10 KV Built in surge protection device and all connected accessories including suitable size of serive bracket housing nuts and bolts etc and making electrical connection complete all as specified and directed. Make : Havells/CG/Philips/Bajaj
Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed Make : Havells/CG/Philips/Bajaj
Repair/Replacement for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor
Repair/Replacement Switch socket combination 2 in 1, 5A flush type Make:- Havells/Legrand/Anchor
Repair/Replacement Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Havells/Legrand/Anchor
Repair/Replacement for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Havells/Legrand/Achor
M&L for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
Repair/Replacement for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
M&L for 10 Watt LED, 2', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack including down unsv complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
Repair/Replacement for 20 Watt LED 4' Tube with single/Double side connection suitable for batten light fitting incl taking down complete all as specified and directed Make : Havells/Bajaj/Philips/CG
Repair/Replacement for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make : Anchor/legrand/Havells make LED lamp :Havells/Bajaj/CG
Repair/Replacement for piano switch single pole 5A, one way complete all as specified and as directed. Make : Anchor/Legrand/Havells
Repair/Replacement for switch socket combination 6 Amps 5 pin , 230 volt flush type complete all as specified and directed. Make : Anchor/Legrand/Havells
Repair/Replacement for switch socket combination 16 Amps 5 pin 230 volt flush type complete all as complete all as specified and directed Make : Anchor/Legrand/Havells
Repair/Replacement for socket outlet 5 pin 6A, 230 volt flush type complete all as specified and directed. Make : Anchor/Legrand/Havells
Repair/Replacement for fan regulator 100/120 watt step type AC 220 volt complete as complete all as specified and as directed Make : Anchor/Legrand/Havells
Repair/Replacement for Modular Switch 1 way 6A,1 module Make:-Anchor/Legrand/Havells
Repair/Replacement for modular switch 1 way 16A, 1 module Make:-Anchor/Legrand/Havells
Repair/Replacement for Modular Socket ,6A/2/3 pin combined 2 module Make:-Anchor/Legrand/Havells
Repair/Replacement Modular Socket ,6A/16A-2/3 pin combined 2 module Make:-Anchor/Legrand/Havells
Repair/Replacement Modular Bell push 1 Way 6A 1 module Make:-Anchor/Legrand/Havells
Repair/Replacement Modular stepped type electronic fan regulator 120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:-Anchor/Legrand/Havells
Supply and fixing for PVC switch board 8" x 6" suitable for switch socket complete all as specified and directed. Make : Richa/ ABB/ Presto Plast
All as per item No 281 here-in-before but PVC switch board 7"x4". Make : Richa/ ABB/ Presto Plast
All as per item No 281 here-in-before but PVC switch board 4" x 4". Make : Richa/ ABB/ Presto Plast
Supply and fixing for LED 12 watt Picture light/Mirror light complete all as specified and as directed. Make : Philips/Havells/Bajaj
Supply and fixing for 6 Watt LED antique copper gold Focus spot ceiling wall light warm white complete all as specified and as directed. Make : Philips/Havells/Bajaj
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge. Make : Havells/Bajaj/Philips/CG
Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed
Supply and Fixing of Flameproof cum Waterproof LED well class light fitting of 90W IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size.
S&F for Moon 150 (Opal)Decorative gate light made up of high grade unbreakable polycarbonate material for retrofit LED lamp B22 base holder bracket complete with 9 Watt LED Bulb and all accessories complete all as specified and as directed Make :Havells Cat No LHFXBON1TN5Q008/Bajaj/CG/Philips
M&L for replacement of 40/42 watt LED 2' x 2' recess mounte ceiling light fitting extruded aluminium heat sink propvided for efficient heat dissipation & integrated electronic drive etc with all accessories internally pre wired incl taking down old unsv complete all as specified and as directed.Make :Havells/Bajaj/CG/Philips
Supply and fixing Omini- directional elevated type high intensity runway edge light fittings suitable for use with 200 Watt , 6.6A halogen lamp complete with all accessories including lamp, 360 degree outer and inner clean lens and filter etc including all electrical connection with suitable size copper conductor cable complete all as specified and directed.
Supply and fixing 200 W 6.6A Bi-pin halogen lamp complete all as specified and directed.
Supply and fixing 45 W 6.6A Bi-pin halogen lamp complete all as specified and directed.
Supply and fixing lamp holder suitable for 200/45 W Bi-pin halogen lamp complete all as specified and directed.
Supply, installation, testing and commisoing in replacement isolating transformer 5KV, 50HZ suitable for air filed lighting systerm of capacity 200W, 6.6A,complete all as specified and directed.
Supply, installation, testing and commisoing in replacement isolating transformer 5KV, 50HZ suitable for air filed lighting systerm of capacity 45W, 6.6A,complete all as specified and directed.
M&L for VTPN 4 way DPX3,double door 415 Volts, suitable for flush mounting and surface mounting with 250 A copper Bus bar for each phase with 2 Netural bar, 2 earth bar and cable ties for cable management, IP 43 with provn for DPX MCCB 160 Amps as incomer and single pole MCB TP/SP as outgoing incl taking down of DBs complete all as specified and as directed. Make : Legrand/ABB/Siemens
Supply and fixing MCCB 3 Pole , 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete with connection testing and commissioning all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed. Make:- Legrand/Havells/Siemens
All as per item No 299 here-in-before but SPN 2 Way
M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make:-Legrand/ABB/Siemens
Supply and fixing MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make : Legrand/Havells/Siemens
Supply and fixing MCB SPN 40-63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make : Legrand/Havells/Siemens
Supply and fixing MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make:- Legrand/Havells/Siemens
M&L replacement for MCB TPN 40-100 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/Havells/Siemens
M&L replacement for MCB TP 40-63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/Havells/Siemens
M&L for 1.5 Sqmm wire x 2 Core PVC insulated sheathed copper flexible cable as per IS 694 Complete all as specified and directed.Make : Finolex/Richa/Havells
All as item No 307 above but in 2.5 Sqmm 2 core complete all as specified and directed.Make : Finolex/Richa/Havells
Supply and fixing for engagement LED Bulb (Red, Green)
M&L for replacement of PVC casting & caping 25 x 12 mm complete all specified and as directed Make : Presto plast/Supreme/Richa
All as per item No 310 here-in-before but in 32 x 12 mm. Make : Presto plast/Supreme/Richa
Supply and fixing for flexible pipe size 20 mm (Colour : White/ Grey)
Supply and fixing for flexible pipe size 25 mm (Colour : White/ Grey)
M/S MUNGA LAL PRASAD
Shri Atoshe Tuccu
MS SADHNA RAHUL
M/S RAHUL TRADING CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .