REPAIR, MAINT TO CEILING FANS, EXHAUST FANS, WALL MOUNTING FANS, AIR CIRCULATORS AND DESERT COOLERS UNDER AGE E/M AT GE JHANSI

Amount

Taking down carefully the ceiling fan of any size 1200mm / 1400mm sweep, sealing cable end, dismantling blades and removing fan and blades to store for servicing including supply and replacing of bearings/bushings, capacitor and terminal connector including capacitor holder suitable for any model of existing fan etc and Hanging ceiling fan in its existing or new location and connecting up including provision of cable from ceiling rose to connector of fan and testing for satisfactory functioning complete all as specified and directed by Engineer-in-Charge. Note: Rewinding if required shall be measured and paid separately.

All as per item No. 1.00 here-in-before but of exhaust fan of any size up to 450mm sweep. Note: Rewinding if required shall be measured and paid separately.

All as per item No. 1.00 here-in-before but of Industrial type Air Circulator Fan of any size up to 600mm sweep. Note: Rewinding if required shall be measured and paid separately.

All as per item No. 1.00 here-in-before but fan motor of desert cooler of any capacity up to 500mm sweep . Note: Rewinding if required shall be measured and paid separately.

Material and labour for Rewinding of Ceiling Fan of size 1200mm / 1400mm sweep by shifting to workshop, cutting and removing of old burnt/damaged winding, cleaning of slots and other parts and rewinding the ceiling fan motor with super enameled copper winding wire of existing gauge with suitable class of insulation, applying varnish, heating, drying, assembling and testing for satisfactory performance complete all as specified and directed by Engineer-in-Charge.

All as per item No. 5.00 here-in-before but exhaust fan of size up to 450mm sweep.

All as per item No. 5.00 here-in-before but industrial air circulator fan of size up to 600mm sweep.

All as per item No. 5.00 here-in-before but desert cooler fan of size up to 500mm sweep.

Supply and fix in replacement of customized Fan clamp made out of 25mm x 3mm MS flat bent to required shape as per site requirement including drilling holes and fixed with suitable size and number of nuts, bolts & washers etc suitable for fixing down rod including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of Fan down rod of suitable size up to one meter long as per site requirement, having suitable holes on top and bottom of rod for inserting bolts and for drawing wires etc complete all as specified and directed by Engineer-in-Charge.

All as per ser item No. 10.00 here-in-before but of size above one meter and up to two meters long.

Supply and fix in replacement of standard GI fan clamp with rubber bush, bolts, nuts, spring washers & split pins etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of electronic fan regulator rotary type in 5 steps, 2 module size, 240V, 50Hz complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of PVC insulated and PVC sheathed 3 core x 0.75 sqmm stranded copper conductor conforming to IS:694 complete all as specified and directed by Engineer-in-Charge.

All as per ser item No. 14.00 here-in-before but of size 3 core x 1.5 sqmm.

Supply and fix in replacement of Plug top, 3 pin, 16 Amps, single phase, 230 volts

Supply and fix in replacement of Plug top, 3 pin, 6 Amps, single phase, 230 volts

Taking down desert coolers of any capacity by disconnecting all the electrical connections, removing side panels, cleaning complete and painting the coolers with two coats of synthetic enamel paint out side and moisture resistance primer inside with spray painting and fixing back the removed panels and reconnecting with electrical connections and writing the MES No complete all as specified and directed by Engineer-in-Charge. Note: Rewinding of fan motor and spare parts required shall be measured and paid separately under relevant items.

Supply and fix in replacement of Submersible water pump 18 watt / 20 watt suitable for working on single phase, 230 Volts, AC, 50Hz power supply suitable for desert coolers of any capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of cooler kit suitable for desert cooler comprising of heavy duty fan motor, copper wound, having minimum motor watt 158 watt at full load, 1360/1400 RPM, three speed control with control switch, single phase, 230V, 50Hz with minimum 450mm sweep fan blades for 3000 Cum / Hr air delivery complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of cooling pads (set of 3 Nos) suitable for the existing evaporative desert coolers of any capacity and model complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of PVC hose pipe along with necessary fittings ad PVC distributor suitable for existing model of desert coolers of any capacity and model complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of Rotary/ piano type switch suitable for existing model of desert coolers of any capacity and model complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of float valve, with polythene float and fly nut complete with fixing accessories suitable for desert coolers complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of fan capacitor 2.5 mfd, 440V suitable for ceiling fan complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of fan capacitor 4.0 mfd, 440V suitable for ceiling fan complete all as specified and directed by Engineer-in-Charge.

M/s Pooja Electricals

M/s Ratan Mechanical Works

Dhruv Enterprises

M/S SHIVA TRADERS