Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.9 LAccepted-AOC VILL PUILLYA PO UNSANI DISTT HOWRAH PIN 711302 | HOWRAH | WEST BENGAL | 711302 | ₹40.9 L Quoted ₹41.0 L | L1 | Accepted-AOC Due to L1 |
| 2 | L2₹43.1 LRejected-Finance 197 PATHAK PARA ROAD KOLKATA 700 060 | KOLKATA | WEST BENGAL | 700060 | ₹43.1 L | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹43.4 LRejected-Finance 17 1 BALLYGUNGE CIRCULAR ROAD KOLKATA 7000019 | KOLKATA | WEST BENGAL | 700019 | ₹43.4 L | L3 | Rejected-Finance Other than lowest |
| 4 | L4₹44.1 LRejected-Finance GC ROAD ABDUL LATIF ROAD PO TITAGARH PS KHARDAH DIST NORTH 24 PARGANAS KOLKATA 700119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | ₹44.1 L | L4 | Rejected-Finance Other than lowest |
| 5 | L5₹45.2 LRejected-Finance 20 1 B M BANERJEE ROAD BELGHARIA KOLKATA 700056 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700056 | ₹45.2 L | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | PRABIR TRADERS L1 | GOODWILL AND CO. L5 | JAGATMATA ENTERPRISE L2 | KWALITY CONSTRUCTION L4 | M A ENTERPRISES L3 | DEB AND COMPANY L7 | DUTTA & DUTTA L6 | DAS ENTERPRISE L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed. | 3 | Cum | 500 ₹1,500 | 550 ₹1,650 | 510 ₹1,530 | 550 ₹1,650 | 515 ₹1,545 | 600 ₹1,800 | 580 ₹1,740 | 610 ₹1,830 |
| 2.00 | M&L for Glazed coloured ceramic tiles in vertical surface 450X 300 x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed. including screed bed 10 mm thick for wall tiling etc. in CM 1:3 & preparation of surfaces. | 909 | Sqm | 1,540 ₹14.0 L | 1,720 ₹15.6 L | 1,650 ₹15.0 L | 1,700 ₹15.5 L | 1,670 ₹15.2 L | 1,850 ₹16.8 L | 1,750 ₹15.9 L | 1,830 ₹16.6 L |
| 3.00 | Cutting Holes in brick walls in cement mortar for inserting holdfast, pipes or steel sections and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n exc one brick etc. all as specified and directed. | 23 | Each | 100 ₹2,300 | 140 ₹3,220 | 120 ₹2,760 | 130 ₹2,990 | 130 ₹2,990 | 140 ₹3,220 | 140 ₹3,220 | 150 ₹3,450 |
| 4.00 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing to Fe 410W (Gde E-250) quality 'A' etc complete all as specified and directed. | 422.45 | KG | 170 ₹71,816.50 | 180 ₹76,041 | 180 ₹76,041 | 185 ₹78,153.25 | 185 ₹78,153.25 | 180 ₹76,041 | 180 ₹76,041 | 185 ₹78,153.25 |
| 5.00 | M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer. | 54 | Sqm | 60 ₹3,240 | 100 ₹5,400 | 70 ₹3,780 | 75 ₹4,050 | 75 ₹4,050 | 100 ₹5,400 | 100 ₹5,400 | 105 ₹5,670 |
| 6.00 | M&L for preparation of new steel and iron surfaces of any description, n. exc 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer. | 8 | 10 RM | 200 ₹1,600 | 280 ₹2,240 | 220 ₹1,760 | 250 ₹2,000 | 225 ₹1,800 | 280 ₹2,240 | 280 ₹2,240 | 285 ₹2,280 |
| 7.00 | Taking up or down 15 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed. | 3 | RM | 50 ₹150 | 100 ₹300 | 60 ₹180 | 80 ₹240 | 65 ₹195 | 120 ₹360 | 120 ₹360 | 130 ₹390 |
| 8.00 | S&F steel tubing water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed to wall and ceiling or laid in floors. | 3 | RM | 300 ₹900 | 340 ₹1,020 | 330 ₹990 | 335 ₹1,005 | 320 ₹960 | 340 ₹1,020 | 340 ₹1,020 | 350 ₹1,050 |
| 9.00 | M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed | 100 | Sqm | 45 ₹4,500 | 66 ₹6,600 | 55 ₹5,500 | 60 ₹6,000 | 60 ₹6,000 | 90 ₹9,000 | 80 ₹8,000 | 100 ₹10,000 |
| 10.00 | M&L for preparation and applying two or more coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43/liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm on old surfaces, all as specified and directed. | 148.64 | Sqm | 190 ₹28,242.43 | 210 ₹31,215.32 | 200 ₹29,728.88 | 200 ₹29,728.88 | 210 ₹31,215.32 | 210 ₹31,215.32 | 210 ₹31,215.32 | 220 ₹32,701.77 |
Updated dates
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
10 Nov 2025, 6:00 pmClosed
Garrison Engineer (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
PROVN OF CERTAIN MINOR WORKS AND REVENUE WORKS AT INSIDE VIJAY DURG UNDER GE (VD) KOLKATA
2025_MES_736125_1
8514/E8
Open Tender
Civil Works
180 days
Garrison Engineer (FW) Kolkata
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer (FW) Kolkata
₹79,000
20 Feb 2026
18 Oct 2025
11 Nov 2025
18 Oct 2025
10 Nov 2025
3 Nov 2025
Amount
Demolition of Brick work / stone masonry built in cement mortar and removing the debris from MD land complete all as specified and directed.
M&L for Glazed coloured ceramic tiles in vertical surface 450X 300 x 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed. including screed bed 10 mm thick for wall tiling etc. in CM 1:3 & preparation of surfaces.
Cutting Holes in brick walls in cement mortar for inserting holdfast, pipes or steel sections and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n exc one brick etc. all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing to Fe 410W (Gde E-250) quality 'A' etc complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer.
M&L for preparation of new steel and iron surfaces of any description, n. exc 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer.
Taking up or down 15 mm bore steel tubing and including cleaning for refixing or removal to store complete all as directed.
S&F steel tubing water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed to wall and ceiling or laid in floors.
M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed
M&L for preparation and applying two or more coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43/liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm on old surfaces, all as specified and directed.
M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of ceiling and applying two coat of oil bound distemper complete. all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including framework of aluminium strips.
S&F powder coated (Thickness or powder coating not less than 50 micron) anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
S&F powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, etc. complete all as specified.
S&F, Powder coated aluminium Three Track sliding window with shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisting of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mm x 44mm x 1.5mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engineer-in-Charge. Note: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be inclusive in this Rate.
Supply and fixing in aluminium (die cast) body door closer hydraulically regulated designation No 3. universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.
S&F, Powder coated aluminium Three Track sliding window with shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisting of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mm x 44mm x 1.5mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engineer-in-Charge. Note: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be inclusive in this Rate.
S&F Plain Aluminium sheet to fixed in door (sheet having 0.5 to 1 mm thickness) including Stainless steel handles if required as specified and directed.
M&L 1.6 mm thick Plain, black, mild steel sheeting, in wall cladding, steel gates, in ridges, hips, valley gutters, drip and straight flashings and similar work cut to size, holes punch headed screws clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angle etc are required complete all as specified and directed.
S&F 5 mm thick ACP Board of required shade securing in aluminium partition using Glazing clips or by other means. All as specified and directed.
S&F 4.8mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
S&F 4.8mm thick plain sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.
M&L for sheet glass 4.80mm thick ordinary quality obscured or frosted on one side and in square n exc 0.5 Sqm in each pane glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed.
M&L for sheet glass 4.80mm thick ordinary quality obscured or frosted on one side and in square exec 0.5 Sqm in each pane glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed.
M&L kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer or mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.
M&L providing 50 mm thick bed of plain cement concrete of type C-2, 1:3:6 (40 mm aggregate) and finish surface.
S&F in 15 mm bore CP Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flangeas specified and directed. (MAKE : JAGUAR, Cat no. LYR-38347S/ PARRYWARE or equivalent as approved by Accepting Officer).
M&L rendering 15 mm thick on fair faces of brick work/concrete surfaces in CM 1: 6 finished fair & even & smooth without using extra cement, all as specified and directed.
M&L for preparation of new surfaces and applying two coats of OBD over alkali resistant primer after applying 3 mm thick wall care putty on walls, all as specified and directed.
M&L for heavy duty coloured ceramic floor tiles of size 300 x 300 x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistant as in floor including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.(Make :Endura or equivalent )
Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.
M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separately.)
Supply only integral water proofing compound all as specified and as directed.
M&L for preparation and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over 2 mm thick exterior wall care putty of new surfaces, all as specified and directed
S&F Solid PVC Wall Lining consisting of 5mm thick single side prelim PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces or un-plastered surfaces of ceiling and applying two coat of oil bound distemper complete. all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm each and not exceeding 4 sqm removing from the site complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, wooden flooring of any thickness including cover fillets complete all as specified
M &L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified.
M&L for 18-20 mm thick Granite slab of approved quality (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick for laying floor finishes in CM 1:4.as specified.
M&L providing 50 mm thick bed of plain cement concrete of type C-2, 1:3:6 (40 mm aggregate) and finish surface complete all as specified and directed.
M&L for Surface excavation on soft and loose soil n.exc 30 cm deep and averaging 15cm deep complete all as specified and directed.
M&L providing 75 mm thick bed of plain cement concrete of type D-2, 1:4:8 (40 mm aggregate) for laying of tiles on screed bed complete all as specified and directed.
M&L for Rough dressed sand stone slab(having minimum thickness 20 mm) flooring, bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 including screed bed or bedding layer or mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete as specified.
M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. as specified and directed.
M&L for dismantling and refixing of concrete paver block with levelling and providing sand bed if required and as directed.
M&L for continuous brick edging using modular bricks With burnt clay bricks of sub class B laid on end at the required angle as required and directed.
M&L for preparation and applying two or more coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over 2 mm thick exterior wall care putty of old surfaces after complete removal of existing treatment, including necessary form work complete all as specified and directed.
M&L for preparation and applying two or more coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, alkali & fungal resistance dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces of floor, all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L non skid ceramic colour tiles of area of each tile exc 0.06 Sqm but n exc exc 0.11 Sqm and 6 to 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed. all as specified and directed .
M&L non skid ceramic colour tiles of area of each tile exc 0.18 Sqm but n exc exc 0.38 Sqm and 6 to 7 mm thick, in skirting and dado etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 10 mm thick screed bed cement mortar 1:4 complete all as specified and directed. all as specified and directed.
M&L non skid ceramic colour tiles of area of each tile exc 0.18 Sqm but n exc exc 0.38 Sqm and 6 to 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed. all as specified and directed.
M & L glazed ceramic colour tiles size 600 mm x 300 mm x 6 to 7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement including 10 mm thick plastering in cement mortar 1:4 complete all as specified and directed. to match complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
M & L for 20 mm thick screed bed or bedding layer of mortar as in backing coat of stone on fair face of brick wall or concrete surface in cement mortar 1:4 complete all as specified and directed.
S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic sheet board backing, fixed with chromium plated screws and cup washer complete all as specified and directed.
S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed concealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed
S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002) or equivalent model in JAQUAR / CERA / HINDWARE)
Supply and fix vitreous china wash basin, white, counter top, size 450 x 400 mm oval shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed .(Make : Jaguar ,Parryware or equivalent as approved by Accepting Officer).
S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043) or equivalent model in JAQUAR / CERA / PARRYWARE HINDWARE/PARRYWARE)
S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-273KNUPR / PRAYAG, Cat No: 9275 / CERA, Model: OCEAN / PARRYWARE, Cat No: G1417A1 / HINDWARE, Cat No: F200020 / ESS ESS, Cat No: C-216) or equivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE)
S&F in repair 15mm dia fancy type chromium plated basin mixer foam flow screwed for iron pipe incl taking down old all as directed by Engr-in-Charge. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS) or equivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE)
S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP) or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE)
S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12) or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE)
S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) white including low level vitreous china valveless symphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. Make-JAQUAR / CERA / HINDWARE/PARRAYWARE)
S&F 10.0 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed.
(E/M PORTION) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed.
One 3/5 pin socket outlet, 5 Amp independent
One 3/5 pin socket outlet, 5 Amp on the same board with other switches
All as per item 73 above but using 2.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core for line conductor and 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core for earth continuity wire for one 15/16 amp multi socket out let independent. (concealed wiring) (except terminal box and laminate cover), fixed to walls/ceiling, for mounting MODULAR TYPE switches
All as per item No 73 above but using 4.0 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 4.0 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.
S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.
S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.
S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.
S & F Modular type White cover plate with frame 3 module complete all as specified and directed.
S & F Modular type White cover plate with frame 6 module complete all as specified and directed.
S & F Modular type White cover plate with frame 12 module complete all as specified and directed.
S & F Modular type Metal Flush box 3 module complete all as specified and directed.
S & F Modular type Metal Flush box 6 module complete all as specified and directed.
S & F Modular type Metal Flush box 12 module complete all as specified and as directed.
S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting n exc 10 cm girth on brick wall all as directed
Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.
M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed.
All as per Srl. Item No. 91 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor.
All as per Srl. Item No. 91 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.
S & F TP&N Vertical Loadline Dbs are fitted with Bus Bars, Neutral Links, Blanking Plates 4 way double door DB LL 4W DD VERT W/O MCCB complete all as specified and directed.
S & F MCCBs 415V, 16KA, 4 Pole 100Amps.complete all as specified and directed.
Supply only MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.
S & F in repair AC short circuit protection motor starter 20 Amps capacity AC 230 Volt complete all as specified and directed.
Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for laying of UG Cable/Pole/Stays, etc., getting out including forming bottom surface to required level and gradient in Soft/ Loose Soil and getting out, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 Cm in Soft/ Loose Soil, complete all as specified and as directed.
Removing excavated materials not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.
M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180Cm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, punned thickness of Sand Cushioning only will be Measured.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed.
Excavation /cutting Road/Hardstanding in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth and getting out complete all as specified and as directed. NOTE: Quoted unit rate shall deem to be included Material and labour required for repairing to damaged road/hardstanding to match existing surface and specification.
Supply and fixing of Decorative Post Top Globe light fitting, 40 Watt LED type, 230 Volts, 50Hz, with IP 65 protection, resistant to impact and corrosion, glare free and better uniformity, fixing on gate post with GI pipe light grade fixed on gate post with cement mortar as required at site and making good distured surface complete all as specified and directed.
S&F PVC insulated unarmoured & PVC sheathed copper cable 3 core of cross sectional area 1.5 Sqmm for providing necessary electrical connection from sheet metal enclosure to light fittings including with suitable size copper lugs complete all as specified and directed.
Supply and install split units indoor/outdoor complete with cordless remote control with minimum 5 star rating inverter type of capacity 2.0TR , copper condensor coil including 4 sqmm 4 core flex cable connection from indoor to outdoor unit as per site requirement including necessary masonry work for making good distrubuted surface and match with the existing colour complete all as specified. Note :- Copper pipe , insulation and connecting cable will be neasured and paid separately under respective item
Supply and fix in repairs suction copper pipe line heavy duty 1/2'' dia and flair nuts from indoor to outdoor unit of split AC 1.5 /2 TR capacity all as specified and directed.
Supply and fix in repairs discharge copper pipe line heavy duty 1/4" dia and flair nuts from indoor to outdoor unit of split AC 1.5 TR /2 TR capacity all as specified and directed.
Supply and fix in repairs PVC pipe nylon imbraided 1of size 5/8" for condenser water drain fitted with clamps/ concealed in wall all as specified and directed.
S&F Nitrile Rubber insulation for copper tubing of size 1/2'' dia duly wrapped complete all as specifed and directed.
S&F Nitrile Rubber insulation for copper tubing of size 1/4'' dia duly wrapped complete all as specifed and directed.
Supply and fixing angle iron brackets wall mounted / Floor mounted as per site made of steel including two coats of powder coated finish and foundation bolts and nuts firing complete and making good the disturbed surface complete all as specifed and directed.
S & F in repair AC short circuit protection motor starter 20 Amps capacity AC 230 Voltcomplete all as specifed and directed.
S & F PVC Cable trays with cover of size 75mm X 75mm on walls / ceilings as per site requirement for proper fixing of Copper pipe with insulation alongwith fittings and fixtures arrangement complete all as specified and directed.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
JAGATMATA ENTERPRISE (BID ID -3469033)
M A ENTERPRISES (BID ID -3469820)
KWALITY CONSTRUCTION (BID ID -3469038)
GOODWILL AND CO. (BID ID -3468348)
DUTTA & DUTTA (BID ID -3469122)
DEB AND COMPANY (BID ID -3470543)
DAS ENTERPRISE (BID ID -3470438)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
TenderDocu8514.pdf
Tender Documents • 1.68 MB
BOQ_824271.xls
BOQ • 5.93 MB
Download all tender documents and submit your bid