Upgradation of Tourism Facility at Umiam water sport Complex Block-A and Redevelopment Orchid Lakes Hospitality and Tourism Complex Block-B

50 mm dia.

65 mm dia.

BoQ_Ver4.0

35 mm thick including lsl marked Stainless Steel butt hinges with necessary screws

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Earthwork in excavation by manual means upto a depth 2m below the existing ground level for foundation trenches of foundations, footing of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.

In all kinds of soil

Extra over item no. 2.1 and 2.2 above for each 1m depth or part thereof beyond the initial depth of 2 m.

Earthwork in filling(excluding rock)in trenches,plinth,sides of foundation etc in layers not exceeding 20cm thick including breaking of clods, consolidating each layer by ramming and watering,lead up to 50m and lift upto 1.5m

With available excavated earth

Sub Head : Random Rubble Masonry With Cement Mortar

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6 coarse sand :12graded stone aggregate 20mm nominal size)upto plinth level with .

Cement mortar 1:6 (1cement : 6 coarse sand)

Providing regular stone masonry in retaining walls etc. with coursed, hammer dressed or blunt chisel dressed stones Of heavy section not less than 25x25x30 cm with proper key stone each not less than 25x25x75 cm long sct in cement mortar 1 :6 (1 cement: 6 sand) including filling Of trenches and providing of weep holes at 1.20 to 1.50 metres apart staggered.

Providing boulder or stone filling with boulders or stones 15 cm size, 60 cm wide behind the rctaining wall etc. complete as directed.

Sub Head : Stone Soiling

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

Stone soiling

Sub Head : Cement Concrete Works

Plain cement concrete floor base in prop 1 :3:6 laid in alternate bays as specified with coarse aggregate Of size 13 mm to 32 mm including dewatering if necessary, and curing etc. complete.

100 mm thick in prop 1:3:6

Plain cement concrete works in foundation bed for footing steps,walls,brick works etc.below plinth level as directed and specified including dewatering if necessary and curing complete(shuttering where necessary shall be measured and paid separately)

In prop. 1:3:6 (1 cement: 3 coarse sand: 6 coarse agg. By volume using mixture machine)

Sub Head : Shuttering

SHUTTERING/FORMWORK Centering and shuttering including strutting,propping etc and removal of form for all heights complete and as directed by Engineer in charge

Foundation, footings, bases of columns, etc. for mass concrete works(using steel)

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel)

Slabs,roofs,landings,balconies and access platform, shelves (using steel)

Lintels,beams,plinth beams,girders, bressumers and cantilever(using steel)

Columns, pillars, piers, Abutments,posts & strut(using steel)

Stairs/spiral staircase, (excluding landings) (using timber)

Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards (using timber).

Edges of slabs and breaks in floors and walls(using timber)

Sub Head : RCC Work

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuterring, finishing and reinforcement. All work upto plinth level

M20 or 1:1 1/2:3 (1cement :1 1/2 coarse sand:3graded stone aggregate 20mm nominal size

Supplying and Fitting of ceiling fan AC operated type 220/250 volt. Complete with 3 Nos of blades down rod canopy hanging shackel & 30mm length of down rod supplied with the fan by the dealer but the extra length will be charged @ Rs 25.00/mtrs.

Supplying , fitting and fixing of exhaust fan double bearing self lubricating type single phase 50Hz 250V AC operated complete with supporting frame, fan blades, nuts and bolts and other petty accessories as required.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement:

M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Sub Head : Brick Work

Brick work in cement mortar with 1st class brick including racking out joints and curing completely in super structure above plinth level upto first floor level including dewatering if necessary as directed.

In proportion 1:6 (1 cement:6 Sand)

Supplying, fixing, connecting, testing & commissioning of calling bell/bell indicator type suitable for230V as well as battery operated complete with all necessary acessories

Sub Head : Plastering

20 mm cement plaster of mix:

In cement mortar 1:4

Sub Head : FLooring And Finishing Works

Supplying & fixing of ABC DRY POWDER fire extinguisher including will all necessary accessories.

Reinforced cement concrete works in beams,slabs,roofs having slope up to 150 ,landings, balconies, shelves, chajjas,lintels,bands,plain window sills,staircases and spiral stair cases above plinth level upto first floor level,excluding the cost of centering,shuttering,finishning and reinforcement.

Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size ), reinforced with 1.6 mm dia. mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.

50 mm thick

Cement concrcte floor topping 1:1:2 (1 cement: 1 coarse sand: 2 stone aggregate) finished with a floating coat of neat cement, including cement slurry, complete

Cement plaster skirting up to 30 cm height, with cement mortar 1 :3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement.

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations Of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish ctc. complete at all levels.

Granite of any colour and shade

Area of slab up to 0.50 sqm

M20 or 1:1/2:3 (1cement :1 1/2 coarse sand: 3 graded stone aggregate 20mm nominal size)

Granite of any colour and shade

Extra over item No 6.2 to 6.8 above for each subsequent floor or part thereof above the first floor level.

Deluxe range

Providing Vitrified Antiskid Tiles of approved quality size, shape not less than 8 mm on floor, skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement: 3 coarse sand) complete at all level as specified and directed.

Deluxe range

Providing polished VITRlFIED wall tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirting over cement mortar bed 10 mm thick in prop.1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with adhesive or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.

Deluxe range

Providing exterior wall cladding with flagstones Of 25mm average thickness on 20 mm thick plaster 1 :3 (1 cement: 3 coarse sand) and jointed with grey cement slurry complete as directed.

Sub Head : Water Proofing

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air ciire for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing Of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:

(a) After surface preparation 1st layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @0.253 kg/sqm. (b) Laying 2nd layer of Fibre glass cloth when the lst layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) 3rd layer of 1.5'mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) 4th and final layer Of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured.

Sub Head : STRUCTURAL STEEL AND ALLIED WORK

Extra over item No 7.3 above for each subsequent floor or part thereof above the first floor level.

Filling sunken floor with broken bats/ stone aggregates and sand including compacting and supplying of materials complete as specified and directed for all levels

Supplying, fitting and fixing in position reinforcement bars upto first floor level, conforming to relevant I.S. code for RCC work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and bending with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required)

Thermo-Mechanically Treated bars

Sub Head : ROOFING

Brick Bats

Stone tile (polished) work for wall lining over 12 mm thick bed Of cement mortar 1 :3 (1 cement: 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

Ridges plain

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to ls:15477, in average 6 mm thick

ness, including grouting of joints (Payment for groiiting of joints to be made separately).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Sub Head : CEILING WORK

Structural steel work in single section,fixed with connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 Mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling/ self-tapping screws of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing pro-coated galvanised steel sheet rcofing accessories 0.50 mm (+0.05 a/a) total coated thickness, Zinc coating 120 grams per sqm as per ls:277, in 240 Mpa Steel grade, 5-7microns epoxy primer on both side Of the sheet and polyester top coat 15-18 microns using self-drilling/ self tapping screws complete:

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per ls:2095 part I and laminated with white 0,16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit

Providing and fixing wall panels and false ceiling with SVP-06 FRONTO SLATE PANELS OF SUITABLE SHADE (VOX make/equivalent) with accessories of same shade, including framing cost with GI channel of suitable make (Saint Gobain / Tata Agrico or equivalent), complete in all respects, inclusive of installation charges, transportation, and applicable GST, all complete as per drawings and as directed by the Architect and Engineer-in-Charge. (quotation attached- material to be procured from KREATIVE INFINITY) [RATE: ₹ 537.00 PER SQFT]

Providing and fixing false ceiling with Soffit Infratop (VOX make/equivalent) with accessories of same shade, including framing cost with GI channel of suitable make (Saint Gobain / Tata Agrico or equivalent), complete in all respects, inclusive of installation charges, transportation, and applicable GST, all complete as per drawings and as directed by the Architect and Engineer-in-Charge. (quotation attached- material to be procured from KREATIVE INFINITY) [RATE: ₹ 465.00 PER SQFT]

Providing and fixing wall-to-wall shower enclosure (JAQUAR - DELTA make or equivalent) comprisingCorner entry half round shower enclosure with curved sliding door, made of 6mm thick clear/tinted toughened glass, with aluminium/steel profile in Chrome / Black / Gold finish, including all necessary fittings, fixtures, handles, rollers, gaskets, silicon sealant, complete as per manufacturer’s specification and as directed by the Architect and Engineer-in-Charge. (material to be procured from JAQUAR GROUP)

Sub Head : Door And

Providing wood work in frames of doors, windows , clerestory windows and other frames,wrought, framed and fixed in position with hold fast lugs or with dash fasteners of required diameter and length.

Sal wood

Flashings/ Aprons.( Up to 600 mm)

Barge board (up to 300 mm)

Windows

Providing and fixing factory made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi-chambered frame, sash and mullion (wherever required) extruded profiles duly reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of fi.ame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling Of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be f illed with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).

Casement door with 3D hinges made Of (big series) frame 67x64 mm & sash 67xl 10 mm both having wall thickness of 2.3 sO.2 mm and single glazing bead/ double glazing bead of appropriate dimension.

Providing and fixing factory made UPVC white colour sliding glazed door comprising of ilpvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 cO.2 mm thick galvanized mild steel section made from roll forming pl.ocess of required length (shape & size according to UPVC profile), appropriate dimension UPVC extruded glazing beads, UPVC extruded interlock and UPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) crescent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage Of water etc. After {ixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and Of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).

Two track tour panels sliding door made of (big series) frame 67x50 mm & sash 46x82 mm both having wall thickness of 2.3 sO.2 mm and single glaring bead/ double glazing bead of appropriate dimension. (Area Of dcor above 8.00 sqm up to 10.00 sqm).

Providing and fixing factory made UPVC white colour casement windows/ ventilators comprising Of UPVC multichambered frame and mullion (wherever required) extruded profiles duly reinforced with 1.60 ±D.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).

Casement window double panels with S.S. friction hinges (300xl9xl.9 mm) made of (small series) frame 47x50 mm, sash 47x68 mm & mullion 47x68 mm all having wall thickness of 1.9 cO.2 mm and single glazing bead of appropriate dimension. (Area of window upto 0.75sqm ).

Casement window double panels with S.S. friction hinges (350xl9xl.9 mm) made of (big series) frame 67x60 mm & sash/ mullion 67x80 mm both having wall thickness of 2.3 ±D.2 mm and single glazing bead/ double glazing bead Of appropriate dimension. (Area of window above 1.50 sqm).

Providing and fixing factory made upvc white colour sliding glazed window above 1.50 in in height dimension comprising of UPVC multi-chambered frame with inlbuilt roller track and sash extruded profiles duly reinforced with 1.60 sO.2 mm thick galvanized mild steel section made from roll forming process Of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads, UPVC extruded interlocks and UPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (jf required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws ctc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage Of water eta. After fixing frame the gap bctween frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction Of Engineer-in- Charge. (Single/ double glass panes shall be paid separately).

With float glass panes of 6 mm thickness (weight not less than 15.0 kg/sqm)

Sub Head : Door,Windows And Ventilators Fittings

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:

250mm x 10mm

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws, eta. to suit shutter thickness complete.

Gutter (600 mm over all girth)

Two track two panels sliding window made of (big series) frame 67x50 mm & sash 46x62 mm both having wall thickness Of 2.3 cO.2 mm and single glazing bead/ double glazing bead Of appropriate dimension.

Providing and fixing chromium plated brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles of approved qiiality with necessary screws etc. complete.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge,

Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Flockwool conforming to ls:8183,density 48 kg/cum, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling Of building.

Sub Head : Painting, Oiling, Varnishing, Polishing Work

Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 Sqm

Painting wood work with deluxe Multi Surface Paint to give an even shade. Two or more coats applied @ 0.90 ltr/10 sqm over and under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture.

Making Plinth Protection 50mm thick of cement Concrete1:3:6 (1 cement :3 coarse sand : 6 graded coarse agg.20mm nominal size)over 75mm thick bed of dry brick ballast 40mm nominal size,well rammed and consolidated and grouted with fine sand including necessary excavation, levelling and dressing & finishing the top smooth

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.

Sub Head : Rain Water Pipe

110 mm diameter

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltr/Rm including drilling and plugging holes etc. with Chlorpyriphos / Lindane E.C.20% with 1% concentration

Sub Head : Plinth Protection

Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti

-termite treatment(excluding the cost of chemical emulsion)

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltr/Rm including drilling and plugging holes etc. with Chlorpyriphos / Lindane E.C.20% with 1% concentration

Sub Head : Anti Termite

Treatment Of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/ Lindane E.C. 20% with 1 a/o concentration

Sub Head : Water Tanks

liter

DRAINAGE

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

100 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

100 mm diameter S.W. pipe

Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. Cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

100x100 mm size P type

With F.P.S. Bricks class designation 75

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

100 mm dia. R.C.C. pipe

150 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With F.P.S. bricks with class designation 75

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :

With F.P.S. bricks class designation 75

With F.P.S. bricks with class designation 75

Extra for depth for manholes

With F.P.S. bricks with class designation 75

Size 90x80 cm

Size 120x90 cm

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design:

With 20 mm diameter round bar

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with pre-cast R.C.C. vertical grating complete as per standard design :

With F.P.S. bricks

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.:

With F.P.S. Bricks

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical grating complete as per standard design :

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level

All type of soil

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level

300 mm dia

Rocky strata including Boulders

150 mm nominal size dia

Rocky strata including Boulders

Sub Head : RAIN WATER HARVESTING TANK

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.:

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

Hours

150 mm dia

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil

Earth work in excavation by mechanical means

(Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge.

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in ti.ue horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and Of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre andcross 'T' Of size 24x25 mm made of 0.30 mm thick (minimum) sheet,1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and Secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids Of 600x600 mm and wall angle of size 24x24xO.3 mm and laying false ceiling tiles of approved textui.e in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using Gl slotted cleats of size 27x37x25xl,6 mm fixed to ceiling with 12.5 mm dja. and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85x30xO.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-incharge.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and supplying sofa set of approved design and size, with high-density foam cushions, upholstered in approved fabric/leatherette, complete with wooden touch finish frame/ arms/ legs, including all accessories, transport, installation, and placing in position, all complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing centre table of approved design and finish, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing side table of approved design and finish, made of 18 mm thick pre-laminated board on one or both sides with 2 mm thick edge banding, complete with all necessary fittings, fixtures, transport, installation and finishing, all complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing Head Board with wall cladding of size 1220 mm × 2500 mm, made of 19 mm ply (12 mm back) with laminate finish, including integrated LED strip lights with all fittings and accessories, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing Queen Size Bed of approved design, made of 19 mm thick plywood, with all exposed and internal surfaces finished with 1 mm thick laminate. Item to include necessary fittings, hardware, wooden lipping, beading and accessories, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing Single Size Bed of approved design, made of 19 mm thick plywood, with all exposed and internal surfaces finished with 1 mm thick laminate. Item to include necessary fittings, hardware, wooden lipping, beading and accessories, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing Bed Side Table with drawer, made of 19 mm ply (12 mm for back) with laminate finish, complete with all fittings and hardware as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing in position Wardrobe, Table, TV Unit with minibar cabinet and luggage rack with storage, including 8 mm thick SS strips, PVC louvers and looking glass, as per approved design and drawings. Carcass to be made of 19 mm thick plywood for top, bottom, sides and shelves, 12 mm thick plywood for back, and 19 mm plywood/glass ledges for internal shelves. All exposed and internal surfaces shall be finished with laminate. Shutters shall be of 19 mm thick ply with 1 mm laminate. Drawer unit to be made of 19 mm thick ply for sides, bottom, back and front. Item shall include all necessary hardware, hinges, screws, sliding drawer fittings, shelf fittings, glass ledges, wooden lipping, beading, and all other fixtures, complete in all respects as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and installing Mini Bar of approved make (Godrej, Haier, or equivalent), complete with all accessories, fittings, electrical connections, and placing in position as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and installing 43-inch LED TV of approved make (Haier or equivalent), including all mounting accessories, wiring, connections, and placing in position as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing sofa set comprising two single-seater sofas with high-density foam cushions and one coffee table of approved design and finish, sofas made of solid/engineered wood frame, coffee table made of 19 mm thick plywood with laminate finish, complete with all necessary hardware, fittings, lipping, and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing verandah/balcony garden sitting set with table of approved design and finish, made of weather-resistant material, complete with all fittings and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing housekeeping shelves made of 18 mm thick board pre-laminated on both sides with 2 mm thick edge banding, complete with all necessary fittings, fixtures, and installation as per approved drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core Of block board construction with frame of 1 St class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

BoQ_Ver4.0

35 mm thick including lsl marked Stainless Steel butt hinges with necessary screws

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.

Providing and fixing locker of size 2000 mm × 2100 mm with individual lockers of 630 mm × 700 mm, made of 18 mm thick pre-laminated board on both sides with 2 mm thick edge banding, with shutters for each locker, complete with locks, handles, necessary fittings, and installation as per drawings and as directed by the Architect & Engineer-in-Charge

Providing and fixing vanity counter box made of 18 mm thick plywood, finished with 1 mm thick laminate on external surfaces and balancing laminate on internal surfaces, with 2 mm thick edge banding, complete with all necessary fittings, fixtures, and installation as per approved drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing study table chairs of approved design and finish, of Godrej or equivalent make, complete with all fittings and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete

Providing and fixing 15 mm dia C.P. Ablution health faucet with 1.0 m long SS extension pipe with wall hook and operating knob complete in all respects.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required :

Extra for providing auto-flushing sensors operated by infra red sensors (Electrical operated) complete with fixing arrangement on wall in place of PVC automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

SANITARY:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Extra for Single lever basin mixer (ceramic disk washerless fitting) C.P. single hole mixing fitting in place of 15 mm brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain

board

Providing and applying Plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder :

C.P. brass

Providing and fixing soil, waste and vent pipes :

100 mm dia.

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

For 100 mm dia. Pipe

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing plain bend of required degree.

Providing and fixing heel rest sanitary bend

100 mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Sand cast iron S&S as per IS - 1729

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe

100 mm dia pipe,SS 304 grade coupling with EPDM rubber gasket

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

Sand cast iron S&S as per IS: 3989.

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

100 mm diameter pipe

Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc :

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Finishing with Deluxe Multi Surface Paint system for interiors and exteriors using primer as per manufacturers specifications, including scaffolding:

Waste coupling 31mm of 79mm length and 62mm breadth weighing not less than 45gms.

Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 60gms.

Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour Weighing not less than 88 gms..

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.

600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms.

Providing and fixing 15 mm dia C.P brass bib cock 2-in-1 (long Body) C.P. cast brass with wall flange [Quarter-turn washerless fitting]

Providing and fixing 15 mm dia C.P. angle valves( quarter turn, washer less) with SS mesh filter and C.P. cast brass wall flange

FURNITURE

Providing and fixing 15 mm dia SS braided pipe 450mm long with connecting nuts [for connection toMixers & taps from angle valve]

Providing and fixing Cast bronze chrome plated grating with ring and Stainless steel anti cockroach basket and two SS screw including fixing to the floor with cement mortar. Size of coackroack trap shall be 125 mm dia

Providing and fixing Soap Disc.

Providing and fixing C.P shower fitting comprising of [All fixture of JAGUAR fittings]:- One overhead Multi flow shower with shower arm and wall flange, One Single liver Shower Mixer with four way divertor, One bath spout with wall flange including cutting and making good the walls where required. [JAGUAR CATLOUGE NO ].

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing Soap Disc.

Providing and fixing C.P shower fitting comprising of [All fixture of JAGUAR fittings]:- One overhead Multi flow shower with shower arm and wall flange, One Single liver Shower Mixer with four way divertor, One bath spout with wall flange including cutting and making good the walls where required. [JAGUAR CATLOUGE NO ].

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and fixing Soap Disc.

Providing and fixing C.P shower fitting comprising of [All fixture of JAGUAR fittings]:- One overhead Multi flow shower with shower arm and wall flange, One Single liver Shower Mixer with four way divertor, One bath spout with wall flange including cutting and making good the walls where required. [JAGUAR CATLOUGE NO ].

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

External work

65 mm nominal outer dia Pipes

80 mm nominal outer dia Pipes

100 mm nominal outer dia Pipes

150 mm nominal outer dia Pipes

BRASS FITTINGS

Providing and fixing brass bib cock of approved quality :

15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

32 mm nominal bore.

40 mm nominal bore

100 mm nominal outer dia Pipes

50 mm nominal bore

65 mm nominal bore

Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

With F.P.S. bricks

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

With F.P.S. bricks

BoQ_Ver4.0

35 mm thick including lsl marked Stainless Steel butt hinges with necessary screws

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

80 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

25 mm nominal bore

ELEVATOR

Primus MRL R25 (8 passengers)

Primus MRL R25 (8 passengers)

Concealed Wiring using MS Condute pipe

Primus MRL R25 (8 passengers)

Wiring in concealed with 2x 1.5Sqmm PVC insulated single core conductor of 600V grade in No.l6 Swg,. Heavy Gauge welded stove enameled painted, 20mm dia MS conduit pipe (E.T) including accessories such as bends,Tees, junctionl boxes, sockets, locknuts brass brushes, etc and required sizes of :MS Box and recommended front plate for housing switches, sockets, fan regulator bell push, etc, matching the colour of the surrounding wall, etc as required or as directed by the Engineer incharge or Architect including earthing Conduit.

Primus MRL R25 (8 passengers)

Long Point wiring upto 10 mts

Primus MRL R25 (8 passengers)

Wiring as in item No.29 complete to a Light Plug Point when fixed elsewhere with continuous earth wire.

Primus MRL R25 (8 passengers)

Wiring as in item No.29 above to Power Plug Point with 2x4mm2 including supplying and fitting of l5Amp modular switch. Socket Combined with continuous earth wire to a Power Plug Point Complete.

Primus MRL R25 (8 passengers)

Wiring as in item No.20 above to Ceiling Fan/exaust Fan Point.

Wiring as in item No.20 above to Wall Light point.

Wiring as in item No.20 above for stair case/Two way switch Light Point Controlled by 2 Nos, 2Way 5Amp Switches

Drawing of Main and Sub-Main Line w

iring approved VIR or PVC cable 250 V Grade in Heavy Gauge 16 Swg E.T. Conduit Pipe with all necessary accessories.

With 2x2.5mm² copper conductors

per meter

Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC Application till 63A

Single pole 240/410 V

Supplying fitting and fixing DX3 Isolators for AC applications upto 125 A

Supplying fitting and fixing DX3 Isolators for AC applications upto 125 A

Four pole 415 V

Four pole 415 V

Noise Levels Monitoring

Supplying, fitting & fixing of Distribution Board ETNP DB's for MCB, Isolator, RCCB and RCBO

IP 43 - #1K 09 with metal door

6 way 8+18 Module

8 way 8+24 Module

Water Quality Monitoring

round slim fir low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge lit LED technology

Airt Quality Monitoring

18W ceiling cutout dia 210mm height 16mm

Supplying fitting and fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories

Earthwork

Supplying fitting and fixing of LED DOWNLIGHTS surface or wall mounted will all necessary accessories.

AC ceiling Fan '1200' mm sweeps

Domestic exaust fans (v) Metal Exhaust Fan 300 mm

Supplying fitting & fixing earthing with copper earth plate 600x600mmx6mm thick including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal, salts etc complete as required.

Copper Earth Plate Electrode

Dingdong bell

Supplying fitting & fixing of LED STRIP LIGHTS surface or wall mounted with all necessary accessories.

LED Strip Lights

Supplying fitting & fixing of LED MIRROR LIGHTS surface or wall mounted with all necessary accessories.

Supplying, Installation, Testing & Commisioning of 1x9 watt LED Mirror light fixture wall mounted with electronic high efficiency electronic driver as cpmplete required. (Philips Make, Cat No-31083 shell line or equivalent)

Supplying fitting & fixing of LED MIRROR LIGHTS surface or wall mounted with all necessary accessories.

LED Mirror Lights

Supplying fitting and fixing of Telephone And switchboard Cables

Supplying fitting and fixing of WEATHER PROOF LED surface mounting luminaire with PC housing in opal finish suitable for wet location with all necessary accessories.

1 Pair 0.50mm

Supplying fitting and fixing of LAN (COMPUTER CABLES)

RG-11 CSS armoured

Providing and placing conference room chairs of approved design and finish, of Godrej or equivalent make, complete with all fittings and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

510x1040 mm bowl depth 250mm.

BoQ_Ver4.0

Doctor’s visit to Construction Camp every fortnight for checking of basic health of the workers.

40 mm dia

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

BoQ_Ver4.0

Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Earthwork in excavation by manual means upto a depth 2m below the existing ground level for foundation trenches of foundations, footing of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils.

In all kinds of soil

Extra over item no. 2.1 and 2.2 above for each 1m depth or part thereof beyond the initial depth of 2 m.

Earthwork in filling(excluding rock)in trenches,plinth,sides of foundation etc in layers not exceeding 20cm thick including breaking of clods, consolidating each layer by ramming and watering,lead up to 50m and lift upto 1.5m

With available excavated earth

WATER SUPPLY (INTERNAL AND EXTERNAL) INSTALLATION

HAIRE VRF AIR-CONDITIONING SYSTEM FOR BLOCK- A

Supplying of 1 X 26 HP + 1X 20 HP DC-INVERTER HAIER MRV (Variable Refrigerant Flow) A.C. Unit. consisting of Two Outdoor units, Five Nos. 3.2 TR. Round Way Cassette A.C. Indoor Units and Fourteen Nos. 1.59 Slim Duct Indoor Units. The Indoor units can be can be operated individually with a remote control. The air cooled outdoor unit consists of Energy Efficient Scroll Compressor, can be installed in an open space as per the site suitability, equipped with overload protector and with valve protection to make the unit more durable (Operating Voltage: 440 ± 10%, 50 Hz, 3 phase). Aesthetically sound, with wide angle of air distribution and super quite operation.

Low side works towards -- Installation of indoor units, installation of outdoor units, providing & installation of Y-Joints, providing & installation of copper refrigerant pipes between indoor & outdoor units along with nitrile tubular insulation, providing & installation of condensate drain water piping with nitrile tubular insulation, providing & installation of communication cable 1.5 sq mm 2C shielded copper, providing, gas charging, testing & commissioning

Sub Head : Random Rubble Masonry With Cement Mortar

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6 coarse sand :12graded stone aggregate 20mm nominal size)upto plinth level with .

Cement mortar 1:6 (1cement : 6 coarse sand)

Providing regular stone masonry in retaining walls etc. with coursed, hammer dressed or blunt chisel dressed stones Of heavy section not less than 25x25x30 cm with proper key stone each not less than 25x25x75 cm long sct in cement mortar 1 :6 (1 cement: 6 sand) including filling Of trenches and providing of weep holes at 1.20 to 1.50 metres apart staggered.

Providing boulder or stone filling with boulders or stones 15 cm size, 60 cm wide behind the rctaining wall etc. complete as directed.

Sub Head : Stone Soiling

Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

Stone soiling

Sub Head : Cement Concrete Works

Plain cement concrete floor base in prop 1 :3:6 laid in alternate bays as specified with coarse aggregate Of size 13 mm to 32 mm including dewatering if necessary, and curing etc. complete.

100 mm thick in prop 1:3:6

Plain cement concrete works in foundation bed for footing steps,walls,brick works etc.below plinth level as directed and specified including dewatering if necessary and curing complete(shuttering where necessary shall be measured and paid separately)

In prop. 1:3:6 (1 cement: 3 coarse sand: 6 coarse agg. By volume using mixture machine)

Sand filling in plinth in layers not exceeding 150 mm thick including breaking Of clods, consolidating by ramming and watering complete as directed (maximum depth 45 cm)

Sub Head : Shuttering

SHUTTERING/FORMWORK Centering and shuttering including strutting,propping etc and removal of form for all heights complete and as directed by Engineer in charge

Foundation, footings, bases of columns, etc. for mass concrete works(using steel)

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel)

Slabs,roofs,landings,balconies and access platform, shelves (using steel)

Lintels,beams,plinth beams,girders, bressumers and cantilever(using steel)

Columns, pillars, piers, Abutments,posts & strut(using steel)

Stairs/spiral staircase, (excluding landings) (using timber)

Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards (using timber).

Edges of slabs and breaks in floors and walls(using timber)

Sub Head : RCC Work

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuterring, finishing and reinforcement. All work upto plinth level

M20 or 1:1 1/2:3 (1cement :1 1/2 coarse sand:3graded stone aggregate 20mm nominal size

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level up to first floor level, excluding cost of centering, shuttering, finishing and reinforcement:

M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Sub Head : Site Preparation

M20 or 1 :11/2:3 (1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Sub Head : Brick Work

Brick work in cement mortar with 1st class brick including racking out joints and curing completely in super structure above plinth level upto first floor level including dewatering if necessary as directed.

In proportion 1:6 (1 cement:6 Sand)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 in above ground level and removal of rubbish up to a distance of 50 in outside the periphery of the area cleared.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Sub Head : Plastering

Surface dressing The ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 in and lift up to 1.5 m.

In cement mortar 1:4

20 mm cement plaster of mix:

In cement mortar 1:4

Sub Head : FLooring And Finishing Works

1 :4:8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size ), reinforced with 1.6 mm dia. mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.

50 mm thick

Cement concrcte floor topping 1:1:2 (1 cement: 1 coarse sand: 2 stone aggregate) finished with a floating coat of neat cement, including cement slurry, complete

Cement plaster skirting up to 30 cm height, with cement mortar 1 :3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement.

Providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations Of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish ctc. complete at all levels.

Granite of any colour and shade

Area of slab up to 0.50 sqm

65 mm thick cement concrete flooring with concrete hardener topping under layer 50mm thick cement concrete in proportion 1:2:4 (1 cement: 2 coarse sand: 4 grtaded stone aggregate of 20 mm nominal size) and top layer 15 mm thick ce,ment hardener consisting of mix 1:2 (1 cement hardener mix:2 graded stone aggreg

Granite of any colour and shade

ate, 6 mm nominal size) by volume,hardening compound mixed @2litre per 50kg of cement or as per manufacturer's specification.this includes cost of cement slurry,complete.

Deluxe range

Providing Vitrified Antiskid Tiles of approved quality size, shape not less than 8 mm on floor, skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement: 3 coarse sand) complete at all level as specified and directed.

Deluxe range

Providing polished VITRlFIED wall tiles of approved quality, size, shape and thickness not less than 8 mm on walls and skirting over cement mortar bed 10 mm thick in prop.1:3 (1 cement: 3 coarse sand) including cutting where necessary finished with flush pointing with adhesive or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.

Deluxe range

Providing exterior wall cladding with flagstones Of 25mm average thickness on 20 mm thick plaster 1 :3 (1 cement: 3 coarse sand) and jointed with grey cement slurry complete as directed.

Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first floor level, excluding the cost of centerlng, shuttering, finishing and reinforcement.

Providing and fixing wall-to-wall shower enclosure (JAQUAR - DELTA make or equivalent) comprisingCorner entry half round shower enclosure with curved sliding door, made of 6mm thick clear/tinted toughened glass, with aluminium/steel profile in Chrome / Black / Gold finish, including all necessary fittings, fixtures, handles, rollers, gaskets, silicon sealant, complete as per manufacturer’s specification and as directed by the Architect and Engineer-in-Charge. (material to be procured from JAQUAR GROUP)

Brick on edge flooring with lst class bricks on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common bum clay non modular bricks:

1 :6 (1cement: 6 coarse sand)

Sub Head : Water Proofing

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air ciire for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing Of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:

(a) After surface preparation 1st layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @0.253 kg/sqm. (b) Laying 2nd layer of Fibre glass cloth when the lst layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) 3rd layer of 1.5'mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) 4th and final layer Of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured.

15 mm thick cement plaster on the rough side of single or half brick wall of mix:

Filling sunken floor with broken brick bats/ stone aggregates and sand including compacting and supplying of materials complete as specified and directed for all levels.

Sub Head : STRUCTURAL STEEL AND ALLIED WORK

Stone tile (polished) work for wall lining over 12 mm thick bed Of cement mortar 1 :3 (1 cement: 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to ls:15477, in average 6 mm thickness, including grouting of joints

Providing and fixing wall-to-wall shower enclosure (JAQUAR - Optima make or equivalent) comprising one fixed toughened glass panel and one sliding glass door – 2 part, made of 8mm thick clear/tinted toughened glass, with aluminium/steel profile in Chrome / Black / Gold finish, including all necessary fittings, fixtures, handles, rollers, gaskets, silicon sealant, complete as per manufacturer’s specification and as directed by the Architect and Engineer-in-Charge. (material to be procured from JAQUAR GROUP)

Providing and laying 500x500x40 mm thick Turf paver on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.

Providing and laying paver over a base of 100 mm compacted sand gravel including cutting where necessary finished with flush pointing with cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.

Supplying, fitting and fixing in position reinforcement bars upto first floor level, conforming to relevant I.S. code for RCC work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and bending with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurements for the same is required)

Providing and fixing Of expansion joint system related with floor location as per drawings and direction of Engineer-ln- Charge. The joint system will be of extruded aluminium base members, self-aligning/ self-centering arrangement and support plates etc. as per ASTM 8221-02. The system shall be such that it provides floor to floor/ floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to its components. System shall consist Of metal profiles with a universal aluminium base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer's pre-engineered self-centering arrangement that freely rotates/ moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufacturer's design and as approved by Engineer-in-Charge. (Material shall confirm to ASTM 6063.)

Thermo-Mechanically Treated bars

Sub Head : ROOFING

FloorJoint upto 100 mm gap

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc„ including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Ridges plain

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in positionand applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel eta. As required.

ln gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, Vc fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered).

High Yield Strength Deformed Bars or Tor Bars

Sub Head : CEILING WORK

Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch Of corrugation as approved by Engineer-in-charge) 0.50 mm(+O.05 a/o) total coated thickness with zinc coating 120 grams per sqm as per ls:277, in 240 Mpa steel grade, 5-7 microns epoxy primer on both side Of the shect and polyester top coat 15-18 microns. Sheet should have protective guard film Of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 mcter or as desired by Engineer-incharge. The sheet shall be fixed using selfrdrilling/ selftapping screws of size (5.5x55 mm) with EPDM seal, complete up to any pitch in horizontav vertical or ciirved surfaces, excluding the cost of purlins. rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing pro-coated galvanised steel sheet roofing accessories 0.50 mm (+0.05 a/a) total coated thickness, Zinc coating 120 grams per sqm as per ls:277, in 240 Mpa Steel grade, 5-7microns epoxy primer on both side Of the shect and polyester top coat 15-18 microns using self-drilling/ selftapping screws complete:

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per ls:2095 part I and laminated with white 0,16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit

Providing and fixing wall panels and false ceiling with SVP-06 FRONTO SLATE PANELS OF SUITABLE SHADE (VOX make/equivalent) with accessories of same shade, including framing cost with GI channel of suitable make (Saint Gobain / Tata Agrico or equivalent), complete in all respects, inclusive of installation charges, transportation, and applicable GST, all complete as per drawings and as directed by the Architect and Engineer-in-Charge. (quotation attached- material to be procured from KREATIVE INFINITY) [RATE: ₹ 537.00 PER SQFT]

Providing and fixing false ceiling with Soffit Infratop (VOX make/equivalent) with accessories of same shade, including framing cost with GI channel of suitable make (Saint Gobain / Tata Agrico or equivalent), complete in all respects, inclusive of installation charges, transportation, and applicable GST, all complete as per drawings and as directed by the Architect and Engineer-in-Charge. (quotation attached- material to be procured from KREATIVE INFINITY) [RATE: ₹ 465.00 PER SQFT]

Flashing/ aprons

Barge board

Sub Head : Door And

Providing wood work in frames of doors, windows , clerestory windows and other frames,wrought, framed and fixed in position with hold fast lugs or with dash fasteners of required diameter and length.

Sal wood

Gutter

Providing corrugated G.S or galvanised iron sheet roofingincluding vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen anda.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat Of approved steel primer and twocoats of approved paint on overlapping of sheets complete(up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost Of purlins, rafters and trusses and includingcutting to size and shape wherever required

0.45 mm thick with zinc coating not less than 275 gin/sqm

Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to ls:8183,density 48 kg/cum, 50 mm thick, wrapped in 200 G Virgin Polythene b

ags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling Of building.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in ti.ue horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and Of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' Of size 24x25 mm made of 0.30 mm thick (minimum) sheet,1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and Secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids Of 600x600 mm and wall angle of size 24x24xO.3 mm and laying false ceiling tiles of approved textui.e in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using Gl slotted cleats of size 27x37x25xl,6 mm fixed to ceiling with 12.5 mm dja. and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85x30xO.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-incharge.

Windows

Providing and fixing factory made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi-chambered frame, sash and mullion (wherever required) extruded profiles duly reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of fi.ame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling Of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be f illed with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).

Casement door with 3D hinges made Of (big series) frame 67x64 mm & sash 67xl 10 mm both having wall thickness of 2.3 sO.2 mm and single glazing bead/ double glazing bead of appropriate dimension.

Providing and fixing factory made UPVC white colour sliding glazed door comprising of ilpvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 cO.2 mm thick galvanized mild steel section made from roll forming pl.ocess of required length (shape & size according to UPVC profile), appropriate dimension UPVC extruded glazing beads, UPVC extruded interlock and UPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) crescent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage Of water etc. After {ixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and Of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).

Two track tour panels sliding door made of (big series) frame 67x50 mm & sash 46x82 mm both having wall thickness of 2.3 sO.2 mm and single glaring bead/ double glazing bead of appropriate dimension. (Area Of dcor above 8.00 sqm up to 10.00 sqm).

Providing and fixing factory made UPVC white colour casement windows/ ventilators comprising Of UPVC multichambered frame and mullion (wherever required) extruded profiles duly reinforced with 1.60 ±D.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).

Casement window double panels with S.S. friction hinges (300xl9xl.9 mm) made of (small series) frame 47x50 mm, sash 47x68 mm & mullion 47x68 mm all having wall thickness of 1.9 cO.2 mm and single glazing bead of appropriate dimension. (Area of window upto 0.75sqm ).

Providing and fixing false ceiling with Soffit Infratop (VOX make/equivalent) with accessories of same shade, including framing cost with GI channel of suitable make (Saint Gobain / Tata Agrico or equivalent), complete in all respects, inclusive of installation charges, transportation, and applicable GST, all complete as per drawings and as directed by the Architect and Engineer-in-Charge. (quotation attached- material to be procured from KREATIVE INFINITY) [RATE: ₹ 465.00 PER SQFT]

Casement window double panels with S.S. friction hinges (350xl9xl.9 mm) made of (big series) frame 67x60 mm & sash/ mullion 67x80 mm both having wall thickness of 2.3 ±D.2 mm and single glazing bead/ double glazing bead Of appropriate dimension. (Area of window above 1.50 sqm).

Providing and fixing factory made upvc white colour sliding glazed window above 1.50 in in height dimension comprising of UPVC multi-chambered frame with inlbuilt roller track and sash extruded profiles duly reinforced with 1.60 sO.2 mm thick galvanized mild steel section made from roll forming process Of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads, UPVC extruded interlocks and UPVC extruded inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (jf required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws ctc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage Of water eta. After fixing frame the gap bctween frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction Of Engineer-in- Charge. (Single/ double glass panes shall be paid separately).

Providing and fixing pillar panelling cladding with Soffit Infratop (VOX make/equivalent) with accessories of same shade, including framing cost with GI channel of suitable make (Saint Gobain / Tata Agrico or equivalent), complete in all respects, inclusive of installation charges, transportation, and applicable GST, all complete as per drawings and as directed by the Architect and Engineer-in-Charge. (quotation attached- material to be procured from KREATIVE INFINITY) [RATE: ₹ 465.00 PER SQFT]

With lst class Local wood

Two track two panels sliding window made of (big series) frame 67x50 mm & sash 46x62 mm both having wall thickness Of 2.3 cO.2 mm and single glazing bead/ double glazing bead Of appropriate dimension.

Pooma/ Hollock/ Gamari/ and the like

Providing and fixing full panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid seperately,all complete as per direction of Engineer-in-charge

With float glass panes of 6 mm thickness (weight not less than 15.0 kg/sqm)

Sub Head : Door,Windows And Ventilators Fittings

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:

250mm x 10mm

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws, eta. to suit shutter thickness complete.

With Teak wood / Sissu wood.

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core Of block board construction with frame of 1 St class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

35 mm thick including lSl marked stainless steel butt hinges

Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising Of UPVC multichambered frame and mullion (wherever required) extruded profiles duly reinforced with 1.60 ±D.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with

4 mm thick glass panes

Providing and fixing chromium plated brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles of approved qiiality with necessary screws etc. complete.

Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3xl00 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12xl2 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing.

Openable

Sub Head : Painting, Oiling, Varnishing, Polishing Work

Two or more coats applied on walls @ 1.25 Itr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 Sqm

Painting wood work with deluxe Multi Surface Paint to give an even shade. Two or more coats applied @ 0.90 ltr/10 sqm over and under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture.

Providing and fixing lsl marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete

150mm x 10mm

Providing and fixing lsI marked oxidised M.S. door latches conforming to ls:5930 with screws etc. complete:

Providing and fixing lSl marked oxidised M.S. handles conforming to ls:4992 with necessary screws etc. complete:

Providing and applying Plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smcoth complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding:

Wall painting with acrylic emulsion pain of approved brand and manufacture to give an even shade:

Finishing old/new wall with Premium Acrylic Smooth exterior paint with Silicone additives of required shade,including scaffolding:

Making Plinth Protection 50mm thick of cement Concrete1:3:6 (1 cement :3 coarse sand : 6 graded coarse agg.20mm nominal size)over 75mm thick bed of dry brick ballast 40mm nominal size,well rammed and consolidated and grouted with fine sand including necessary excavation, levelling and dressing & finishing the top smooth

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Finishing walls with Acrylic Smooth exterior paint of required shade, including scaffolding:

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes.

Sub Head : Rain Water Pipe

110 mm diameter

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltr/Rm including drilling and plugging holes etc. with Chlorpyriphos / Lindane E.C.20% with 1% concentration

Sub Head : Plinth Protection

Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti

-termite treatment(excluding the cost of chemical emulsion)

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 ltr/Rm including drilling and plugging holes etc. with Chlorpyriphos / Lindane E.C.20% with 1% concentration

Sub Head : Anti Termite

Treatment Of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/ Lindane E.C. 20% with 1 a/o concentration

Sub Head : Water Tanks

liter

DRAINAGE

Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :

100 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

100 mm diameter S.W. pipe

Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. Cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

100x100 mm size P type

With F.P.S. Bricks class designation 75

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

100 mm dia. R.C.C. pipe

150 mm dia. R.C.C. pipe

250 mm dia. R.C.C. pipe

450 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. Cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

With F.P.S. bricks with class designation 75

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :

With F.P.S. bricks class designation 75

With F.P.S. bricks with class designation 75

Extra for depth for manholes

With F.P.S. bricks with class designation 75

Size 90x80 cm

Size 120x90 cm

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design:

With 20 mm diameter round bar

Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with pre-cast R.C.C. vertical grating complete as per standard design :

With F.P.S. bricks

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.:

With F.P.S. Bricks

Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical grating complete as per standard design :

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level

All type of soil

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level

300 mm dia

New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Rocky strata including Boulders

150 mm nominal size dia

New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Rocky strata including Boulders

Sub Head : RAIN WATER HARVESTING TANK

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.:

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

Hours

150 mm dia

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

All kinds of soil

Earth work in excavation by mechanical means

(Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge.

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for all heights

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

On steel work

Sub Head : M.S Wheel

Sub Head : M.S Wheel

Renewing wrought iron or M.S, Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/ welding and erection etc. complcte

Wheel 50 mm diameter and below

per wheel

75 mm diameter

100 mm nominal size dia

Sub Head : M.S Wheel

Sub Head : Kitchen

SS GAS CUM CHARCOAL TANDOOR

Sub Head : M.S Wheel

WORK TABLE WITH 2 BOTTOM SHELVE

3 BURNER INDIAN RANGE WITH BOTTOM SHELVE

SINGLE SINK UNIT

SINGLE BURNER RANGE (LOW HEIGHT)

3 DOOR WORKTOP FREEZE

OVER HEAD SHELVE WITH HEATER

2+1 CHINESE RANGE WITH BOTTOM SHELVE

2 BURNER CONTI WITH GRIDDLE PLATE & UNDER ELECTRIC OVEN

DOSA HOT PLATE WITH BOTTOM SHELVE

6 VESSEL HOT BAIN MARIE WITH BOTTOM SHELVE (GN PAN:- 12.8X10.4X6)

3 DOOR WORKTOP REFRIGERATOR

SALAMANDER

BLENDER

SANDWICH GRILLER

TOASTER

WORK TABLE SINK (R.H.S)

CUTTING TABLE WITH 2 BOTTOM SHELVE

POTATO PEELER

WET GRINDER

PULVERISER

PULVERISER

DOUGH KNEEDER

4 DOOR VERTICAL REFRIGERATOR

OVER HEAD SHELVE WITH HEATER

3 DOOR WORKTOP FREEZE

Sub Head : M.S Wheel

4 DOOR VERTICAL DEEP FREEZER

2+1 CHINESE RANGE WITH BOTTOM SHELVE

CLEAN DISH RACK-5 SHELVE

POT RACK- 4 SHELVE

SOILED DISH TABLE

3 SINK WASHING UNIT

STORAGE RACK- 4 SHELVE

COLD ROOM - BLUE STAR OR EQUIVALENT

2 DOOR WORK TOP FREEZE

INDUCTION PLATE

SS HOOD WITH SS FILTER - PART WISE

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and supplying sofa set of approved design and size, with high-density foam cushions, upholstered in approved fabric/leatherette, complete with wooden touch finish frame/ arms/ legs, including all accessories, transport, installation, and placing in position, all complete as per drawings and as directed by the Architect & Engineer-in-Charge.

GI DUCTING WITH FITTINGS-HOT AIR

Providing and placing centre table of approved design and finish, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing side table of approved design and finish, made of 18 mm thick pre-laminated board on one or both sides with 2 mm thick edge banding, complete with all necessary fittings, fixtures, transport, installation and finishing, all complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing Head Board with wall cladding of size 1220 mm × 2500 mm, made of 19 mm ply (12 mm back) with laminate finish, including integrated LED strip lights with all fittings and accessories, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing Queen Size Bed of approved design, made of 19 mm thick plywood, with all exposed and internal surfaces finished with 1 mm thick laminate. Item to include necessary fittings, hardware, wooden lipping, beading and accessories, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

HEAVY DUTY INDUSTRIAL 15HP CENTRIFUGAL BLOWER FAN-440 V

GI DUCTING WITH FITTINGS-FRESH AIR

Providing and placing Single Size Bed of approved design, made of 19 mm thick plywood, with all exposed and internal surfaces finished with 1 mm thick laminate. Item to include necessary fittings, hardware, wooden lipping, beading and accessories, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

HEAVY DUTY INDUSTRIAL 3 HP CENTRIFUGAL BLOWER FAN-440 V

Providing and placing Bed Side Table with drawer, made of 19 mm ply (12 mm for back) with laminate finish, complete with all fittings and hardware as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing in position Wardrobe, Table, TV Unit with minibar cabinet and luggage rack with storage, including 8 mm thick SS strips, PVC louvers and looking glass, as per approved design and drawings. Carcass to be made of 19 mm thick plywood for top, bottom, sides and shelves, 12 mm thick plywood for back, and 19 mm plywood/glass ledges for internal shelves. All exposed and internal surfaces shall be finished with laminate. Shutters shall be of 19 mm thick ply with 1 mm laminate. Drawer unit to be made of 19 mm thick ply for sides, bottom, back and front. Item shall include all necessary hardware, hinges, screws, sliding drawer fittings, shelf fittings, glass ledges, wooden lipping, beading, and all other fixtures, complete in all respects as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and installing Mini Bar of approved make (Godrej, Haier, or equivalent), complete with all accessories, fittings, electrical connections, and placing in position as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and installing 43-inch LED TV of approved make (Haier or equivalent), including all mounting accessories, wiring, connections, and placing in position as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing sofa set comprising two single-seater sofas with high-density foam cushions and one coffee table of approved design and finish, sofas made of solid/engineered wood frame, coffee table made of 19 mm thick plywood with laminate finish, complete with all necessary hardware, fittings, lipping, and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing verandah/balcony garden sitting set with table of approved design and finish, made of weather-resistant material, complete with all fittings and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing housekeeping shelves made of 18 mm thick board pre-laminated on both sides with 2 mm thick edge banding, complete with all necessary fittings, fixtures, and installation as per approved drawings and as directed by the Architect & Engineer-in-Charge.

FRESH AIR GRILL

6X2=12 LPG CYLINDER MANIFOLD SYSTEM WITH GAS FITTINGS

1/2" MS LPG PIPE LINE WITH GAS FITTINGS

Sub Head : FURNITURE

Providing and placing King Size Bed of approved design, made of 19 mm thick plywood, with all exposed and internal surfaces finished with 1 mm thick laminate. Item to include necessary fittings, hardware, wooden lipping, beading and accessories, complete as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing in position Wardrobe, Table, TV Unit with minibar, kitchenette and luggage rack with storage, including 8 mm thick SS strips, PVC louvers and looking glass, as per approved design and drawings. Carcass to be made of 19 mm thick plywood for top, bottom, sides and shelves, 12 mm thick plywood for back, and 19 mm plywood/glass ledges for internal shelves. All exposed and internal surfaces shall be finished with laminate. Shutters shall be of 19 mm thick ply with 1 mm laminate. Drawer unit to be made of 19 mm thick ply for sides, bottom, back and front. Item shall include all necessary hardware, hinges, screws, sliding drawer fittings, shelf fittings, glass ledges, wooden lipping, beading, and all other fixtures, complete in all respects as per drawings and as directed by the Architect & Engineer-in-Charge.

BoQ_Ver4.0

Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Providing and fixing stainless steel sink of approved make and size in kitchenette unit, complete with tap/cock, drainage connections, clamps, and all necessary accessories and fittings, installed as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing pool umbrella of approved design and finish, made of weather-resistant frame and fabric, complete with stand, fittings, and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and supplying modular reception table of size 1500 × 600 × 1100 mm, top 25 mm thick pre-laminated particle board with 18 mm understructure, gable ends and modesty panels, all edges with 2 mm PVC edge banding. Make: Wipro/Herman Miller/ Steelcase/ Spacewood/ Godrej/HNI or equivalent, BIFMA (ANSI/BIFMA x7.1–2011) and FSC certified, complete as per approved sample and as directed by the Architect.

Providing and placing reception chairs of approved design and finish, of Godrej or equivalent make, complete with all fittings and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and supplying “Summit” square table of size 29" × 32" × 32" of Supreme or equivalent make, complete with all accessories, delivery, handling, installation and as per directions of Architect & Engineer-in-Charge.

Providing and supplying “Web” armless chair of Supreme or equivalent make, stackable, complete as per directions of Architect & Engineer-in-Charge.

SEWERAGE TREATMENT PLANT

20 KLD SEWERAGE TREATMENT PLANT (STP).

Supplying, installing, testing & commissioning of Sewerage Treatment Plant (excluding excavation, back filling & disposal of surplus earth Civil construction work) for the following duty:

Nature of effluent - Effluent from HOTEL AND DOMISTIC USE

Daily average flow - 20 Cum / Day

BOD5 - 250 – 400 Mg/L

S. Solids - 300 – 450 Mg/L

COD - 400 – 800 Mg/L

Oil & Grease - 50 Mg / L

Effluent discharge standard after treatment

BOD5 - Less than 10 Mg/L

S. Solids - Less than 20 Mg/L

COD - Less than 40 Mg/L

Oil & Grease - Less than 5 Mg/L

Sewage treatment plant shall include the following items:

Supply, installation, testing & commissioning of 1 No Stainless Steel Bar Screen with suitable lifting arrangement (size 700 mm wide x 600 mm high approx)

Supply, installation, testing & commissioning of non clogging type pumps capable of handling solids upto 20- 25 mm having CI casing & impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty (At EQT. Tank)

SUBMERSIBLE Equilasation pump to ANOXIC Tank with CI body & CI impeller pump

Flow rate (each) = 1.0 m3/hr

BOD5 - Less than 10 Mg/L

Supply, installation, testing & commissioning of 1 No Stainless Steel Bar Screen with suitable lifting arrangement (size 700 mm wide x 600 mm high approx)

Supply, installation, testing & commissioning of non clogging type pumps capable of handling solids upto 20- 25 mm having CI casing & impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, level controller (with wiring) to control the level of sump automatically. Pumps shall have following duty (At EQT. Tank)

SUBMERSIBLE Equilasation pump to ANOXIC Tank with CI body & CI impeller pump

Head = 8 - 10 Mtr

Make: Wilo/ KSB/ CNP/ Eqv.

SUBMERSIBLE Sludge Recirculation pump to Aeration tank with CI body & CI impeller pump

Flow rate (each) = 1.5 m3/hr

Head = 6- 8 Mtr

(Solid handling size for this pump shall be 5- 7 mm).

SUBMERSIBLE Sludge LIFT pump to SHT/ CENTRIFUGE with CI body & CI impeller pump

Air diffusion system shall include the following:

Twin lobe rotary air blowers capable of delivering 30 m3/hr. of free air at 4 Mts. driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. ( 1W + 1 SB)

Make: Everest / Beta / Akash / A1

Air piping shall comprise of pipes droppers / laterals with cPVC submerge pipe complete with all fittings. Contactor to submit detailed P & I indicating their proposal

Air line for MBBR Tank

Air line for Equalization

Non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from platform at the top.

Make: Gamani Engineering/ Welcome/MM Aqua

Diffuser for MBBR Tank, Equalization

and Sludge Holding Tank

Bronze Ball valve and air dispersion grid as required for STP as described above.

Diffuser for MBBR Tank, Equalization

MBBR Media, Tube Deck Media for Primary and Secondary Tube Settler.

Providing and fixing all piping (as described below) and isolation control valves for making the system complete.

MS Epoxy : Air piping non submerge.

uPVC Piping : Pumped effluent & tank overflow pipe line

uPVC Piping : Interconnecting pipe line after delivery

header of pump/ filter

Filter Feed Pump

Supplying, installing, testing & commissioning of SUBMERSIBLE centrifugal feed water pumps CI Body, CI Impeller, CS Shaft, with mechanical seal along with Coupled motor, pressure gauge with isolation cock, Isolation valve.

Make: M&P/ Kirloskar/ CG

Capacity : 3 m3/hr

Head : 20- 25 M

Supplying, installing, testing & commissioning of SUBMERSIBLE centrifugal feed water pumps CI Body, CI Impeller, CS Shaft, with mechanical seal along with Coupled motor, pressure gauge with isolation cock, Isolation valve.

Make: M&P/ Kirloskar/ CG

Capacity : 3 m3/hr

Supplying, installing, testing and commissioning of dosing system for Poly, Alum and Chlorine dosing consisting of one PVC tank of 100 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-6 lph. The motor shall be suitable for operation at 240 V / single phase /50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. Make: E dose/ Mini Dose/ Eqv.

Agitator with support for ANNOXIC TANK.

Supplying, installing, testing and commissioning of FRP epoxy coated vessel filter. Filter shall be suitable for working pressure of 3.0 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, backwash, rinse drain, vacuum breaker, including frontal piping.

Make: Gamani Engineering/ Pentair

Multigrade pressure sand filter

Flow rate : 3 m3/hr

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.

Providing and fixing locker of size 2000 mm × 2100 mm with individual lockers of 630 mm × 700 mm, made of 18 mm thick pre-laminated board on both sides with 2 mm thick edge banding, with shutters for each locker, complete with locks, handles, necessary fittings, and installation as per drawings and as directed by the Architect & Engineer-in-Charge

Providing and fixing vanity counter box made of 18 mm thick plywood, finished with 1 mm thick laminate on external surfaces and balancing laminate on internal surfaces, with 2 mm thick edge banding, complete with all necessary fittings, fixtures, and installation as per approved drawings and as directed by the Architect & Engineer-in-Charge.

Providing and placing study table chairs of approved design and finish, of Godrej or equivalent make, complete with all fittings and accessories as per drawings and as directed by the Architect & Engineer-in-Charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete

Providing and fixing 15 mm dia C.P. Ablution health faucet with 1.0 m long SS extension pipe with wall hook and operating knob complete in all respects.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required :

Extra for providing auto-flushing sensors operated by infra red sensors (Electrical operated) complete with fixing arrangement on wall in place of PVC automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

SANITARY:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Extra for Single lever basin mixer (ceramic disk washerless fitting) C.P. single hole mixing fitting in place of 15 mm brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain

board

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe

32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder :

C.P. brass

Providing and fixing soil, waste and vent pipes :

100 mm dia.

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

For 100 mm dia. Pipe

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing plain bend of required degree.

Providing and fixing heel rest sanitary bend

100 mm dia

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Sand cast iron S&S as per IS - 1729

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe

100 mm dia pipe,SS 304 grade coupling with EPDM rubber gasket

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

Sand cast iron S&S as per IS: 3989.

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :

100 mm diameter pipe

Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc :

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 31mm of 79mm length and 62mm breadth weighing not less than 45gms.

Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less than 60gms.

Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms.

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour Weighing not less than 88 gms..

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.

600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300 gms.

Providing and fixing 15 mm dia C.P brass bib cock 2-in-1 (long Body) C.P. cast brass with wall flange [Quarter-turn washerless fitting]

Providing and fixing 15 mm dia C.P. angle valves( quarter turn, washer less) with SS mesh filter and C.P. cast brass wall flange

Providing and fixing 15 mm dia SS braided pipe 450mm long with connecting nuts [for connection toMixers & taps from angle valve]

Providing and fixing Cast bronze chrome plated grating with ring and Stainless steel anti cockroach basket and two SS screw including fixing to the floor with cement mortar. Size of coackroack trap shall be 125 mm dia

Providing and fixing Soap Disc.

Providing and fixing C.P shower fitting comprising of [All fixture of JAGUAR fittings]:- One overhead Multi flow shower with shower arm and wall flange, One Single liver Shower Mixer with four way divertor, One bath spout with wall flange including cutting and making good the walls where required. [JAGUAR CATLOUGE NO ].

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Filtration Velocity: 15 m3/hr/m2

Providing and fixing Soap Disc.

Providing and fixing C.P shower fitting comprising of [All fixture of JAGUAR fittings]:- One overhead Multi flow shower with shower arm and wall flange, One Single liver Shower Mixer with four way divertor, One bath spout with wall flange including cutting and making good the walls where required. [JAGUAR CATLOUGE NO ].

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

32 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

Providing and fixing Soap Disc.

Providing and fixing C.P shower fitting comprising of [All fixture of JAGUAR fittings]:- One overhead Multi flow shower with shower arm and wall flange, One Single liver Shower Mixer with four way divertor, One bath spout with wall flange including cutting and making good the walls where required. [JAGUAR CATLOUGE NO ].

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

External work

65 mm nominal outer dia Pipes

80 mm nominal outer dia Pipes

100 mm nominal outer dia Pipes

150 mm nominal outer dia Pipes

BRASS FITTINGS

Providing and fixing brass bib cock of approved quality :

15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

32 mm nominal bore.

40 mm nominal bore

100 mm nominal outer dia Pipes

50 mm nominal bore

65 mm nominal bore

Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

With F.P.S. bricks

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

With F.P.S. bricks

Activated Carbon Filter

Supplying, installation & commissioning of 300 mm dia cenntrifuge with 1 no of Feed Pump.

Flow rate : 2 m3/hr

Make: Gamani Engineering/ Whirler Centrifugal

Sub Head : Control Panel for Sewage Treatment Plant

Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3 formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Galvanised hardware with zinc passivation shall be used in fabrication of panels.

All pumps are with proper earthing strip and wire. Flexible cable wiith conduit for all pumps.

Concealed work including cutting chases and making good the walls etc.,

WATER INFILTRATION AND PUMPING

Providing and fixing horizontal single/multistage centrifugal pumping set with CI body, bronze impeller, stainless steel shaft and induction motor mounted on common base frame, vibration eleminating pads accessories complete as per specifications. Motor to be suitable for 415 Volts

+ 10%, 3 phase 50 Hz. A/C supply.

Filter Water Pump to Over Head Tank

Type of pump - Horizontal (End Suction)/ Vertical on line

Capacity - 100 LPM

Head - 35 M

H.P. - To suit

WATER INFILTRATION AND PUMPING

Motor RPM - 2900

The Motor HP to be confirmed by the manufacturer for the duty mentioned for each pump alongwith performance characteristic curve.

The Motor of Hydro-pneumatic pumps shall be suitable for operation with variable frequency drives system.

The following Automation and instrumentation including supply, installation, testing and commissioning of all sensors, relays, level controller/switches, level indicators etc. Relays/Modules and wiring for completely functional system.

For Automatic switching ON-OFF of following pumps:

Borewell pumps from Level Controller (four level Hydrostatic type) installed in Raw Water Tank and Raw water to Filter watwr tank.

Filter water pumps from level Controller (four level Hydrostatic type) installed in overhead water tank.

Dry Run Preventor for each of the above pumps by providing Low level sensor in the three tank viz Filter water tank.

Regulation of Pumps includes cut in, cut-outs, switching ON-OFF pumps based on requirements.

Borewell pumps from Level Controller (four level Hydrostatic type) installed in Raw Water Tank and Raw water to Filter watwr tank.

Water Level Indicator

Panel mounted digital analogue type with indication for overhead tank

Panel mounted digital analogue type with indication for Underground tank.

Flow switches for inter locking of Chlorine Dosing Pump with filter water supply pump.

Providing and fixing cast iron dual plate type non-return valve (as per Technical specification) including nuts, bolts, 1.5mm thick CAF gasket sheets complete in all respects (PN 1.6)

Providing and fixing cast steel/ Bronge/ Gum Metal Ball valve as per IS, Tested as per (PN: 1.6) rating, including nuts, bolts, Minimum 1.5mm thick CAF gasket sheets, complete in all respects.

Providing and fixing standard dial type pressure gauge dia 100 mm with screwed inlet with isolation cock suitable for liquid gauge to show pressure upto:

(0-5) KG/Sq.cm

Providing and fixing GI pipes to IS:1239/3589 heavy class including all fittings like anchor fastners, couplings, bends, elbows, tee, flanges etc. Welding/threaded joint as required paintings with one coat of red oxide primer and two or more coats of synthetic enamel paints to give an even shade, cutting holes and chases in brick or RCC walls and making good complete.

Providing and fixing dust and vermin proof cubical type motor control centre for the pumps mentioned in item No.1A. It is fabricated from 2mm thick CRCA sheet with stove enamelled finish and comprising of:

One incoming main MCCB of suitable rating

One fully taped aluminium bus-bar of suitable capacity

in separate bus-bar chamber.

WATER INFILTRATION AND PUMPING

One MCCB/MPCB of suitable capacity and rating for each pumps (mentioned in Item No. 1A)

One No. fully automatic star-delta/DOL starter with push buttons and on/off indicating lights for each pumps (mentioned in Item No. 1A)

Provision of providing water level controller/indicator interlocking for automatic operation alongwith Relays/Modules required for items described in it

em No.2 of the Schedule of Quantities is to be taken care of in the control panel

Panel mounted digital analogue type with indication for overhead tank

Appropriate etched plastic plate for each starter/switch.

Single phasing preventors one for each 3-phase motor.

Colour coded internal wiring from incoming main to bus-bar switch, geat, starters, meters indicating lamps complete in all respect.

The rating of all switchgear must match the HP of all pumps quoted and 20% space for spare to be kept in the panel.

WATER FILTERATION UNITS

FRP pressure vessel (as per IS:2825) dual media filter complete in all respects, ready for operation of capacity 6 Cu.M per hour complete with dished ends, supporting legs and facing pad for pipe connection complete with manhole cover, frontal CPVC pipe work fitted with multiport valves and proper supports. Plant shall be provided with inlet, outlet pressure gauge isolated by stainless steel needle valve and stainless steel nipple, sample valves, charge of filter media (sand and anthrocite) and internals consisting of distributor and collector manually operated, cast iron diaphragm/ Ball valve and piping for bypass filter line with interconnecting piping, connecting socket for dosing pump at outlet. Drawing showing internal details to be approved (Rate of flow not to be exceed 15 Cu.M/Hr/Sq.M of surface area).

CHEMICAL DOSING UNIT

Medium pressure spring actuator type chemical dosing pump with FRP body and internal parts, dispensing valves, foot valves, relief valves, mounting plate, chemical tank of 250 litre capacity complete.

Capacity 0-6 LPH at pressure head of 40 MWC.

Providing and fixing M.S. flanged connection Simplex Bucket Strainers with nuts, bolts, CAF gasket 2 mm thick complete in all respects. The filteration area inside the strainer shall not be less than 5 times of cross- sectional area of connecting pipe diameter.

SUBMERSIBLE SUMP PUMPS

Capacity 0-6 LPH at pressure head of 40 MWC.

Sump Pumps with float type controller automatic operation flow rate 18.0 Cu.M per hour, 10 M head, submersible type, suitable for clear water drainage & 20mm solid handling capacity complete with motor, control panel, submersible cable, dry run preventive devices, built in suction strainer, bottom support frame and dual plate type NRV’s as required.

HOT WATER GENERATION SYSTEM

Providing and fixing Heat pump for air to hot water generation, suitable for working temperature output range from 55 deg C to 60 deg C and pressure of 4.5 Kg/ sq.cm. The COP of Heat pump shall be not less than 4.0 and its heat Exchanger shall be having heat transfer area suitable for the rated capacity of 9000 Kcal/hr.The hot water storage tank cum Calorifier shall be of 1000 ltr capacity complete with all inlet/outlet, drains/return connection and nozzles as per requirement. Also it shall be supplied with Pressure gauges and dial type thermometer at inlet/ outlet ,pressure relief valve, safety valve test valve, etc. Insulation shall be as per specification of piping and finally cladded with 24 gauge aluminium sheet with proper overlaps

The system shall be supplied with complete electronic control system for its automatic operation and required numbers of starter for pumps for reciculation of hot water between heat pump heatexchanger and calorifier tank and domestic reciculation pump in between calorifier to domestic supply/return (BRAND - VENUS)

Providing and fixing centrifugal hot water circulation vertical/horizontal pumps of SS Body/ impellers and S.S. wetted parts with mechanical seal, capable of handling hot water of 90 deg C at required flow and head, suitable for operating Single/three phase, 50 Hz., 240/415 V. The pump shall be suitable for temperature upto 90 deg C and shall have low NPSH. (BRAND - GRUNDFOS/ DP HOLLAND)

Capacity : 50 LPM

Providing and fixing Heat pump for air to hot water generation, suitable for working temperature output range from 55 deg C to 60 deg C and pressure of 4.5 Kg/ sq.cm. The COP of Heat pump shall be not less than 4.0 and its heat Exchanger shall be having heat transfer area suitable for the rated capacity of 9000 Kcal/hr.The hot water storage tank cum Calorifier shall be of 1000 ltr capacity complete with all inlet/outlet, drains/return connection and nozzles as per requirement. Also it shall be supplied with Pressure gauges and dial type thermometer at inlet/ outlet ,pressure relief valve, safety valve test valve, etc. Insulation shall be as per specification of piping and finally cladded with 24 gauge aluminium sheet with proper overlaps

Head : 08 MWC

Providing and fixing Heat pump for air to hot water generation, suitable for working temperature output range from 55 deg C to 60 deg C and pressure of 4.5 Kg/ sq.cm. The COP of Heat pump shall be not less than 4.0 and its heat Exchanger shall be having heat transfer area suitable for the rated capacity of 9000 Kcal/hr.The hot water storage tank cum Calorifier shall be of 1000 ltr capacity complete with all inlet/outlet, drains/return connection and nozzles as per requirement. Also it shall be supplied with Pressure gauges and dial type thermometer at inlet/ outlet ,pressure relief valve, safety valve test valve, etc. Insulation shall be as per specification of piping and finally cladded with 24 gauge aluminium sheet with proper overlaps

The system shall be supplied with complete electronic control system for its automatic operation and required numbers of starter for pumps for reciculation of hot water between heat pump heatexchanger and calorifier tank and domestic reciculation pump in between calorifier to domestic supply/return (BRAND - VENUS)

Motor : as per manufacturer recommendations (Performance curve of the pumps shall be submitted alongwith technical datasheet)

The system shall be supplied with complete electronic control system for its automatic operation and required numbers of starter for pumps for reciculation of hot water between heat pump heatexchanger and calorifier tank and domestic reciculation pump in between calorifier to domestic supply/return (BRAND - VENUS)

Capacity : 75 LPM

HOT WATER GENERATION SYSTEM

Head : 15 MWC

Providing and fixing Heat pump for air to hot water generation, suitable for working temperature output range from 55 deg C to 60 deg C and pressure of 4.5 Kg/ sq.cm. The COP of Heat pump shall be not less than 4.0 and its heat Exchanger shall be having heat transfer area suitable for the rated capacity of 9000 Kcal/hr.The hot water storage tank cum Calorifier shall be of 1000 ltr capacity complete with all inlet/outlet, drains/return connection and nozzles as per requirement. Also it shall be supplied with Pressure gauges and dial type thermometer at inlet/ outlet ,pressure relief valve, safety valve test valve, etc. Insulation shall be as per specification of piping and finally cladded with 24 gauge aluminium sheet with proper overlaps

The system shall be supplied with complete electronic control system for its automatic operation and required numbers of starter for pumps for reciculation of hot water between heat pump heatexchanger and calorifier tank and domestic reciculation pump in between calorifier to domestic supply/return (BRAND - VENUS)

Providing and fixing centrifugal hot water circulation vertical/horizontal pumps of SS Body/ impellers and S.S. wetted parts with mechanical seal, capable of handling hot water of 90 deg C at required flow and head, suitable for operating Single/three phase, 50 Hz., 240/415 V. The pump shall be suitable for temperature upto 90 deg C and shall have low NPSH. (BRAND - GRUNDFOS/ DP HOLLAND)

Providing & fixing brass/G.M/bronze/cast steel body ball valve with screwed female ends, suitable for hot water of temperature up to 90 deg C, with stainless steel ball and spindle, glass filled Teflon seating and gland packing, quarter turn lever operated full bore design, hydraulically tested to 20 kg/sqcm. (BRAND - SKS/ CIMBERIO)

HOT WATER GENERATION SYSTEM

15 mm nominal bore

Providing and fixing Heat pump for air to hot water generation, suitable for working temperature output range from 55 deg C to 60 deg C and pressure of 4.5 Kg/ sq.cm. The COP of Heat pump shall be not less than 4.0 and its heat Exchanger shall be having heat transfer area suitable for the rated capacity of 9000 Kcal/hr.The hot water storage tank cum Calorifier shall be of 1000 ltr capacity complete with all inlet/outlet, drains/return connection and nozzles as per requirement. Also it shall be supplied with Pressure gauges and dial type thermometer at inlet/ outlet ,pressure relief valve, safety valve test valve, etc. Insulation shall be as per specification of piping and finally cladded with 24 gauge aluminium sheet with proper overlaps

The system shall be supplied with complete electronic control system for its automatic operation and required numbers of starter for pumps for reciculation of hot water between heat pump heatexchanger and calorifier tank and domestic reciculation pump in between calorifier to domestic supply/return (BRAND - VENUS)

Providing and fixing centrifugal hot water circulation vertical/horizontal pumps of SS Body/ impellers and S.S. wetted parts with mechanical seal, capable of handling hot water of 90 deg C at required flow and head, suitable for operating Single/three phase, 50 Hz., 240/415 V. The pump shall be suitable for temperature upto 90 deg C and shall have low NPSH. (BRAND - GRUNDFOS/ DP HOLLAND)

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

BoQ_Ver4.0

Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

80 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

25 mm nominal bore

ELEVATOR

Primus MRL R25 (8 passengers)

Primus MRL R25 (8 passengers)

Concealed Wiring using MS Condute pipe

Primus MRL R25 (8 passengers)

Wiring in concealed with 2x 1.5Sqmm PVC insulated single core conductor of 600V grade in No.l6 Swg,. Heavy Gauge welded stove enameled painted, 20mm dia MS conduit pipe (E.T) including accessories such as bends,Tees, junctionl boxes, sockets, locknuts brass brushes, etc and required sizes of :MS Box and recommended front plate for housing switches, sockets, fan regulator bell push, etc, matching the colour of the surrounding wall, etc as required or as directed by the Engineer incharge or Architect including earthing Conduit.

Primus MRL R25 (8 passengers)

Long Point wiring upto 10 mts

Primus MRL R25 (8 passengers)

Wiring as in item No.29 complete to a Light Plug Point when fixed elsewhere with continuous earth wire.

Primus MRL R25 (8 passengers)

Wiring as in item No.29 above to Power Plug Point with 2x4mm2 including supplying and fitting of l5Amp modular switch. Socket Combined with continuous earth wire to a Power Plug Point Complete.

Primus MRL R25 (8 passengers)

Wiring as in item No.20 above to Ceiling Fan/exaust Fan Point.

Wiring as in item No.20 above to Wall Light point.

Wiring as in item No.20 above for stair case/Two way switch Light Point Controlled by 2 Nos, 2Way 5Amp Switches

Drawing of Main and Sub-Main Line w

iring approved VIR or PVC cable 250 V Grade in Heavy Gauge 16 Swg E.T. Conduit Pipe with all necessary accessories.

With 2x2.5mm² copper conductors

per meter

Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB's for AC Application till 63A

Single pole 240/410 V

Supplying fitting and fixing DX3 Isolators for AC applications upto 125 A

Supplying fitting and fixing DX3 Isolators for AC applications upto 125 A

Four pole 415 V

Four pole 415 V

Noise Levels Monitoring

Supplying, fitting & fixing of Distribution Board ETNP DB's for MCB, Isolator, RCCB and RCBO

IP 43 - #1K 09 with metal door

6 way 8+18 Module

8 way 8+24 Module

Water Quality Monitoring

round slim fir low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge lit LED technology

Airt Quality Monitoring

18W ceiling cutout dia 210mm height 16mm

Supplying fitting and fixing complete polish brass bracket, 16mm dia and 23cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories

Earthwork

Supplying fitting and fixing of LED DOWNLIGHTS surface or wall mounted will all necessary accessories.

AC ceiling Fan '1200' mm sweeps

Domestic exaust fans (v) Metal Exhaust Fan 300 mm

Supplying fitting & fixing earthing with copper earth plate 600x600mmx6mm thick including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal, salts etc complete as required.

Copper Earth Plate Electrode

Dingdong bell

Supplying fitting & fixing of LED STRIP LIGHTS surface or wall mounted with all necessary accessories.

LED Strip Lights

Supplying fitting & fixing of LED MIRROR LIGHTS surface or wall mounted with all necessary accessories.

Supplying, Installation, Testing & Commisioning of 1x9 watt LED Mirror light fixture wall mounted with electronic high efficiency electronic driver as cpmplete required. (Philips Make, Cat No-31083 shell line or equivalent)

Supplying fitting & fixing of LED MIRROR LIGHTS surface or wall mounted with all necessary accessories.

LED Mirror Lights

Supplying fitting and fixing of Telephone And switchboard Cables

Supplying fitting and fixing of WEATHER PROOF LED surface mounting luminaire with PC housing in opal finish suitable for wet location with all necessary accessories.

1 Pair 0.50mm

Supplying fitting and fixing of LAN (COMPUTER CABLES)

RG-11 CSS armoured

Providing and fixing Balancing valve for hot water of temperature upto 90 Deg C

Providing & fixing brass/G.M/bronze/cast steel body Spring loaded Non- Return valve with screwed female ends, suitable for hot water of temperature up to 80 deg C, glass filled Teflon seating and hydraulically tested to 20 kg/sqcm.

Providing and fixing rate of water flow meter with direct reading dial in litres with all internal parts in gunmetal or brass, strainer, flanged distance piece for easy removal in future, 100 mm dia. including necessary test certificate for the meter from Local Municipal Authorities/ISI marked.

Providing and fixing G.I. pipes complete (IS: 1239 Medium class) with G.I.fittings, flanges & clamps, including cutting and making good the walls etc. complete( for internal and external work)

20mm nominal bore

Providing and fixing insulation to hot water piping with specified thickness in the table of technical specification with resin bonded mineral wool preformed pipe sections over approved primer and sealing with 24 gauge aluminium cladding in an approved manner in accordance with the specifications. (For GI pipe)

20 mm nominal bore

Providing 9 mm thick closed-cell expanded synthetic rubber pipe sleeve insulation to hot water lines in wall-chase/buried in floor applied with a primer coat as recommended by manufacturer complete. (for G.I. Pipes)

25.32 nominal size

32.40 nominal size

AIR CONDITIONING SYSTEM

Supplying of 1 X 26 HP + 1X 16 HP DC-INVERTER HAIER MRV (Variable Refrigerant Flow) A.C. Unit. consisting of Two Outdoor units, Five Nos. 3.2 TR. Round Way Cassette A.C. Indoor Units and Fourteen Nos. 1.59 Slim Duct Indoor Units. The Indoor units can be can be operated individually with a remote control. The air cooled outdoor unit consists of Energy Efficient Scroll Compressor, can be installed in an open space as per the site suitability, equipped with overload protector and with valve protection to make the unit more durable (Operating Voltage: 440 ± 10%, 50 Hz, 3 phase). Aesthetically sound, with wide angle of air distribution and super quite operation.

Low side works towards -- Installation of indoor units, installation of outdoor units, providing & installation of Y-Joints, providing & installation of copper refrigerant pipes between indoor & outdoor units along with nitrile tubular insulation, providing & installation of condensate drain water piping with nitrile tubular insulation, providing & installation of communication cable 1.5 sq mm 2C shielded copper, providing, gas charging, testing & commissioning

ELECTRICAL JOB:

Power cabling including supply, laying and termination of armoured cable, PVC insulated, aluminium conductor, 1.1 KV of sizes as mentioned below as per approved design/specifications.

ii) 3C x 2.5 sq.mm

iii) 3C x 4.0 sq.mm

Earthing work including supply, laying and termination of G.I. strip/wire of sizes as mentioned below with lugs etc.

GI strip

ii) 25 x 3 mm

GI wire

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Cable tray, M.S. in construction, perforated, powder coated of sizes

Treatment Of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/ Lindane E.C. 20% with 1 a/o concentration

ii) 150 x 50 mm

Control cabling including supply, laying end termination of PVC insulated,screen protection, copper conductor of sizes as mentioned below as per approved design/specifications.

iii) 10C x 1.5 sq.mm

iv) 6C x 1.5 sq.mm

vii) 2C x 1.5 sq.mm

Structural supports as required for cable trays complete with installation with anchor fastner/grouting in brick walls, painting with red-oxide and 2 coats of enamel paint of colour as specified by Owner/Consultant.

Supply, fixing of M.S. conduit of suitable sizes with clamps as required.

Water Tank

SH I - ( FIRE HYDRANT RISER SYSTEM)

Providing, fixing, testing and commissioning of SINGLE headed gun - metal, ISI marked oblique pattern Hydrant Landing Valve with 80mm dia. Flanged intel & 63mm dia, instantaneous type female outlet complete with gun-metal cap chain, twist release type lug and all accessories as per IS:5290-1983 (Type 'B').

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing, fixing, testing and commissioning of First-Aid Fire Hose Reel Wall mounting swimming type complete with Drum, Bracket, Stop Valve and 20mm dia. 36M long high pressure braided hose Reel tubing as per IS:444 with gun-metal shut-off nozzle with 5mm orifice. The Hose Reel shall strictly conform to IS:884-1985

Providing, fixing, testing and commissioning of SINGLE headed gun - metal, ISI marked oblique pattern Hydrant Landing Valve with 80mm dia. Flanged intel & 63mm dia, instantaneous type female outlet complete with gun-metal cap chain, twist release type lug and all accessories as per IS:5290-1983 (Type 'B').

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing Non-percolating Flexible Hose (RRL Type-A) ISI marked (IS: 636) 63mm dia. X 15 M long complete with instantaneous type gun-metal 63mm dia. ISI marked male and female couplings (IS: 903) bound and riveted to Hose Pipes with copper rivets and copper wire.

Providing and fixing of Weather Proof Hose Cabinets fabricated from 16 g M.S. Sheet with full front glass door and locking arrangements, suitable to accommodate one Landing valve (Yard Hydrant) 2 Nos. 15 M long Hoses and 1 No. Branch Pipe. The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade and shall be suitably mounted on a raised masonry platform as required.

Providing and fixing of Indoor type Hose Cabinets fabricated from 16g M.S Sheet with full front glass door and locking arrangement, suitable to accommodate double outlet Landing Valve, 2 Nos. 15 M long Hoses, First - Aid Hose Reel and 2 Nos. Branch Pipes. The cabinet shall be painted with one coat of primer and two coats of synthetic enamel paint of approved shade.

Providing, fixing, testing and commissioning of SINGLE headed gun - metal, ISI marked oblique pattern Hydrant Landing Valve with 80mm dia. Flanged intel & 63mm dia, instantaneous type female outlet complete with gun-metal cap chain, twist release type lug and all accessories as per IS:5290-1983 (Type 'B').

Providing & fixing of Gun-Metal Fire Brigade connection (Suction collecting head) consisting of 4 Nos. 63mm dia. Instantaneous type male couplings’ with built-in check valves and 150mm dia. Flanged outlet complete with bolts, nuts and rubber insertions as per IS:904-1983

Providing & fixing of Gun-Metal 63mm dia. Short Branch pipe with 16mm dia nozzle, ISI marked (IS:903).

Providing & fixing of Gun-Metal Fire Brigade Suction Hose Coupling (draw out connection) with Nut for female coupling as per IS: 902-1974 complete with 100mm dia. G.I. Suction Pipe and Foot Valve (to be connected to Static Tank).

Providing, fixing, testing & commissioning of Air- Cushion Tank (Air-Vessel) 250mm dia. & 1000 mm high with dished top, made of minimum 6 mm thick M.S. Pipe/Plate complete with 20mm dia. Brass Air Release Valve (Ball Type), 20 mm dia. Stop Valve Pressure Gauge and all accessories as required.

Providing, fixing, testing and commissioning of Mild Steel, Black Pipes (IS: 1239 Part-I) heavy class including cutting, screwing, welding etc. and providing all fittings viz. Flanges, Bends, Tees, Elbows, Reducers, clamps, Hangers etc. including cutting holes and chases in brick or RCC walls/slabs and making good complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved shade.

200 mm dia. (6 mm thick)

150 mm dia.

Providing, fixing, testing and commissioning of Mild Steel Black Pipes (IS: 1239 Part-I) heavy class including cutting, screwing, welding etc. complete with fittings viz. Tees, Elbows, Bends, Flanges, Reducers etc. including excavation (up to 1.5m deep) back filling and removal of surplus soil & providing Anti- corrosive Treatment (Coating and Wrapping) as per IS:10221 complete as required.

Providing, fixing, testing and commissioning of Cast Iron flanged ISI marked Non - return Valves complete with Rubber insertion, Nuts, Bolts and Washers etc. (IS:5312) of following sizes:

150 mm dia.

Providing, fixing, testing and commissioning of Cast Iron Flanges ISI marked Sluice Valve Class PN-1.6 complete with Rubber Insertion, Nuts, Bolts and Washers etc. (IS:780) of following sizes)

Construction of brick masonry valve chamber 120 X 120 X 100 cms (inside) with 75 class designation brick work in cement mortar 1.5 (1 cement : 5 fine sand) for Check Valves and Sluice Valves with C.I. Double Flap Surface Box 60 X 45 cms (inside) with locking arrangement and RCC top slab 1:2:3) mix (1 Cement :2 Coarse Sand : 4 Graded Stone aggregate 20mm nominal size) and inside plastering with cement mortar 1:3 (1 Cement : 3 Coarse Sand) finished with a floating coat of neat cement as per standard design (with FPS Bricks).

Providing, fixing, testing & commissioning of 300 mm dia. Pot type Strainers with copper cage to be provided inside the static Water Tank on suction line.

Providing, fixing, testing and commissioning of Electric Motor Driven Fire Pumping Set suitable for automatic operation consisting of the following as per specification:

Horizontally mounted, centrifugal type single/ multistage Fire Pump having Cast Iron Body, Gun-Metal/Bronze impeller, stainless steel shaft and capable of delivering 2280 LPM against a total head of 56 M complete with necessary Pressure Gauge, Pressure Switch, NRV etc. on the delivery side including bypass arrangement comprising of 50 mm dia. G.M. Globe Valve, 50 mm dia. G.I. medium class piping, (upto 5 M), necessary fittings and arrangement of fixing a blank flange for periodical testing of the working of the pumping set.

Squirrel cage induction motor totally enclosed fan cooled type suitable for 400/440 volts (±5 %) 3 phase, 50 HZ, A.C. supply, of suitable capacity(min. 112.5 KW) for the above pump with Synchronous speed of 1500 RPM conforming to IS:325 and duly coupled with above pump with flexible coupling including earthing as per relevant Indian Standard and Specifications.

Common bed plate for mounting pump and motor fabricated of suitable M.S. Channel as per manufacturer's recommendations.

Suitable RCC Pump foundations as per manufacturer's design and 6 Nos. Dunlop Anti-Vibration (Cushy Foot) heavy Duty mounting pads.

Providing, fixing, testing and Commissioning of Diesel Engine Driven Fire Pumping Set suitable for Automatic Operation consisting of the following as per Specification :

Horizontally mounted centrifugal type single/ multistage Fire pump having Cast Iron Body, Gun Metal/Bronze impeller, stainless steel shaft and capable of delivering 2280 LPM against a total head of 56 M complete with necessary Pressure Gauge, Pressure Switch, NRV etc. on delivery side including bypass arrangement comprising of 50mm dia. G.M Globe Valve, 50mm dia. G.I medium class piping (upto 5m) necessary fittings and arrangement of fixing a black flange for periodical testing of the working of the pumping set.

Water cooled Diesel Engine developing at least 60 BHP at1500 RPM for the above pump complete with Automatic Starting Mechanism, Batteries, Automatic Battery Charger unit, Flexible Coupling with the pump, Fuel Tank, Silencer, Exhaust Pipe & all standard accessories as required as per TAC rules including mandatory spares and tool kit.

Common bed Plate for mounting Diesel Engine and pump fabricated of suitable M.S. Channel a

s per manufacturer's recommendations.

Suitable RCC foundation as per manufacturer's design and 8 Nos, Dunlop Anti-Vibration (Cushy Foot) heavy duty mounting pads.

Providing, fixing, testing and Commissioning of Electrical Motor Driven Automatic Pressurisation (Jockey) pumping set consisting of the following as per Specification :

Horizontally mounted Centrifugal type single/ multistage type pump for building pressure loss due to any leakage in the system and capable to deliver approx. 180 LPM against a total head of 56 M having Cast Iron Body, G.M./Bronze impeller, stainless steel shaft and complete with necessary Pressure Gauge, NRV, Switch etc. on delivery side including bypass arrangement comprising of 25mm dia. G.I. medium class piping (upto 5m), necessary fittings and arrangement of fixing a black flange for periodical testing of the working of the pumping set.

Squirrel cage induction motor totally enclosed fan cooled type suitable for 400/440 volts (+5%) 3 phase, 50 HZ. AC supply of suitable capacity (medium 15 K.W.) for the above pump with synchronous speed of 1500/3000 RPM confirming to 15:325 and duly coupled with the above pump with flexible coupling including earthing as per relevant Indian Standard and CPWD Specification.

Common bed Plate for mounting pump and motor fabricated of suitable M.S. Channel as per manufacturer's recommendations.

Suitable RCC pump foundation as per manufacturer's design and 4 Nos, Kanwal/ Resistoflex Anti-Vibration (Cushy Foot) mounting pads.

Providing, Fixing, testing and commissioning of cubical type floor mounted Fire Pump Control Panel fabricated from 14g M.S. Sheet duly painted with stove enameled finish of approve shade as per Specifications comprising of :

Two-250 Amp. TP M.C.C.Bs. having 35 KA fault level main pump motors.

One-100 Amp. TP M.C.C.B. having 10 KA fault level for Jockey pump Motors.

Three phase indicating lamps.

Three Panel Type Ampere Metres one for each Motor with ASS, CTS etc, complete.

Three neon indicating lamps, one for each Motor.

Earthing with G.I Earth Plate (Electrode) 600 x 600 x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangenent and watering pipe etc., complete as per specification and as required (without charcoal & rock salt).

Extra for Charcoal and salt for G.I Earthing Plate Electrodes as required.

Providing & fixing of 25mm x 5 mm G.I Earthing strip in 40 mm dia. G.I (medium class) Pipe from Earth Electrode as required.

Providing & fixing of 25 mm x 5 mm G.I Earthing strip on surface or recessed for Earth connections/loop Earthing as required.

Providing, fixing, testing and commissioning of air - Cushion Tank (Air Vessel) 250 mm dia. & 1000 mm high with dished top, made of minimum 6 mm thick M.S. Pipe/Plate complete with 20 mm dia. Brass Air Release valve 20 mm dia. Stop Valve Pressure Gauge and all accessories as required (Floor mounted),

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing, fixing, testing and commissioning of 20 mm dia. Brass Air Release Valves.

Providing, Laying, Testing & Jointing 300 mm dia RCC NP2 class pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement :2 fine sand) including testing of joints etc. complete.

Providing & laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40 mm nominal size) all-round R.C.C. pipes including bed concrete as per standard design.

Supply & fixing of 80 mm dia exhaust pipe from engine to ground floor level with flexible joint, silencer & fittings etc and insulating the exhaust pipe with 50 mm thick rock wool insulation and cladded with 22 guage Aluminium sheet in an approved manner.

Approval of fire & sprinkler system from Local Fire Authority at initial & various other stages of works, including preparation of report / drawings as per Local Fire Authority. Contractor shall include cost of all liaison works which are not explicitly mentioned above but are mandatory to have Fire Authority approval.

AUTOMATIC SPRINKLER SYSTEM

Providing, fixing testing and commissioning of 15 mm dia. quartzoid bulb type Sprinkler set to operate at 68o C UL/FM/LPC/TAC listed/approved.

board

Pendent/ Side Wall type with Decorative Rossette in White/Chrome finish.

Providing 25 Nos. each of above two types 15 mm dia. quartzoid bulb Spare-Sprinklers set to operate 68o C neatly kept in a wooden cabinet with suitable shelves having full glass front and locking arrangement and one Spanner properly fixed in the cabinet painted with enamel paint of approved shade.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

Providing, fixing, testing and commissioning of 150 mm dia. Installation Control Valve assembly complete with 150 mm dia. ISI marked C.I. Sluice Valve & Hydraulic Alarm Motor & gong including test & Drain Valves and all necessary trimming connection as per manufacturer’s catalogue UL/FM/FOC/TAC/Listed/approved.

Providing, fixing, testing and commissioning of Mild Steel Black Pipes (IS: 1239 Part-I) heavy class including cutting , welding etc., and providing all fittings viz. Flanges, Bends Tees, Elbows, Reducers, Clamps, Hangers etc., including cutting holes and chases in brick or RCC walls / slabs and making good complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved shade

80 mm dia.

BoQ_Ver4.0

Doctor’s visit to Construction Camp every fortnight for checking of basic health of the workers.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #